Difference between revisions of "Robomotic BugLogic 3"
Jump to navigation
Jump to search
(Created device page) |
m |
||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | |||
| image = [[File:Robomotic_buglogic3.png|180px]] | |||
| name = Robomotic BugLogic 3 | |||
| status = supported | |||
| source_code_dir = fx2lafw | |||
| channels = 8 | |||
| samplerate = 24MHz | |||
| samplerate_state = — | |||
| triggers = none (SW-only) | |||
| voltages = -0.5V — 5.25V | |||
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V | |||
| memory = none | |||
| compression = none | |||
| price = $5 - $10 | |||
| website = [http://norduino.robomotic.com/products-page/categories/buglogic3/ robomotic.com] | |||
}} | |||
See [[Robomotic BugLogic 3/Info]] for more | The '''Robomotic BugLogic 3''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate. | ||
It is a clone of the [[Saleae Logic]]. | |||
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | |||
See [[Robomotic BugLogic 3/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | |||
== Hardware == | == Hardware == | ||
* TODO | * '''Main chip:''' Cypress CY7C68013A-56LFXC (FX2LP) | ||
* '''I2C EEPROM''': ? | |||
* '''Octal tristate bus transceiver''': LVC245 (TODO: vendor?) | |||
* '''Crystal''': 24MHz | |||
== Photos == | |||
<gallery> | |||
File:Robomotic_buglogic3.jpg|<small>Device, front</small> | |||
</gallery> | |||
== Protocol == | |||
Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol. | |||
== Resources == | |||
= | * [http://www.norduino.org/index.php?title=BugLogic3_board Buglogic3 wiki page] | ||
* [http://norduino.robomotic.com/products-page/categories/buglogic3/ robomotic.com: Hardware description] | |||
[[Category:Device]] | |||
[[Category:Logic analyzer]] | |||
[[Category:Supported]] | |||
Latest revision as of 14:22, 30 June 2019
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.5V — 5.25V |
| Threshold voltage | Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V |
| Memory | none |
| Compression | none |
| Price range | $5 - $10 |
| Website | robomotic.com |
The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the Saleae Logic.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See Robomotic BugLogic 3/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Main chip: Cypress CY7C68013A-56LFXC (FX2LP)
- I2C EEPROM: ?
- Octal tristate bus transceiver: LVC245 (TODO: vendor?)
- Crystal: 24MHz
Photos
Device, front
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.