Difference between revisions of "ATORCH DL24MP-150W Purple"
(Add power meter IC) |
|||
| Line 2: | Line 2: | ||
| image = [[File:ATORCH DL24MP-150W Purple Picture.jpg|180px]] | | image = [[File:ATORCH DL24MP-150W Purple Picture.jpg|180px]] | ||
| name = ATORCH DL24MP-150W Purple | | name = ATORCH DL24MP-150W Purple | ||
| status = | | status = supported | ||
| source_code_dir = atorch | | source_code_dir = atorch | ||
| channels = 1 | | channels = 1 | ||
| Line 68: | Line 68: | ||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Digital load]] | [[Category:Digital load]] | ||
[[Category: | [[Category:Supported]] | ||
Latest revision as of 19:15, 6 May 2023
 | |
| Status | supported |
|---|---|
| Source code | atorch |
| Channels | 1 |
| Voltage/current (CH1) | 150W / 0.2-25A / 2-200V |
| Connectivity | serial over Bluetooth, BLE |
| Features | modular DC electronic load |
| Website | en.atorch.cn |
The ATORCH DL24MP-150W Purple is a modular DC electronic load kit with serial connectivity over USB.
General
The base kit contains a control panel, featuring a color display and 4 buttons, and a master power module, rated for 0.2~25A, 0~200V, max 150W.
Slave modules can be connected, each increasing the maximum power by 150W.
Each power module is cooled by a 8cm fan blowing air through 4 smalls heatsinks ( one per power mosfet )
Operation requires a 12V power supply ( 1A for the base kit, increasing with each add slave module ).
If offers 7 modes of operation :
- CC : Constant Current
- CV : Constant Voltage
- CR : Constant Resistance
- CP : Constant Power
- BRT : Determines the ESR of a battery
- PT : Determines the maximum power provided by a power supply
- CT : Determines the resistance of the wiring ?
Hardware
- Power MOSFET x4: International Rectifier IRFP264N
- MCU : HC32L170
- Bluetooth IC : Unidentified ( SOIC8, marking BP0Kxxx-28A2)
- Power meter IC x2 : HLW8110. Looks like the 2nd one might be used just as an ADC for the 2 temperature sensors.
The control panel PCB has an unpopulated socket that can be used to connect a rotary encoder and a push button, providing more practical controls.
Protocol
The device communicates through serial-over-Bluetooth (RFCOMM), appearing under the DL24M_SPP name, and BLE, under the DL24M_BLE name. The same protocol is used both on the BLE and Bluetooth link.
See ATORCH J7-c
The following measurements are available through that protocol :
- Actual voltage
- Actual current
- Actual capacity ( in mAh, for battery capacity measurement )
- Actual energy (in Wh)
- External sensor temperature.
Photos
Control Panel PCB, Top
Control Panel PCB, Bottom
Master PCB, Bottom, left
Master PCB, Top, Control Section
