Difference between revisions of "RockSeed RS310P"

From sigrok
Jump to navigation Jump to search
(added initial device information)
 
m
 
(6 intermediate revisions by 2 users not shown)
Line 2: Line 2:
| image              = [[File:Rockseed_rs310p.jpg|180px]]
| image              = [[File:Rockseed_rs310p.jpg|180px]]
| name                = ROCKSEED RS310P
| name                = ROCKSEED RS310P
| status              = unsupported
| status              = in progress
| source_code_dir    =  
| source_code_dir    = etommens-etm-xxxxp
| channels            = 1
| channels            = 1
| channel1            = varies
| channel1            = varies
Line 12: Line 12:
'''Please note: This page is a work in progress, more to come.'''
'''Please note: This page is a work in progress, more to come.'''
This is a very low cost programmable switching power-supply providing up to 30V and 10A.
This is a very low cost programmable switching power-supply providing up to 30V and 10A.
See [[ETommens eTM-xxxxP Series]] for information common to all devices in this series.


== Hardware ==
== Hardware ==
Line 38: Line 40:
== Protocol ==
== Protocol ==


Modbus RTU only function codes 0x03 and 0x06 are supported (according to the pdf that came with the device).([https://en.wikipedia.org/wiki/Modbus#Frame_formats Wikipedia]). Baudrate defaults to 9600, 1 start bit, 8 data bits, no checkbits and 1 stop bit. Registers are 16bits, bigendian.
See [[ETommens eTM-xxxxP Series#Protocol]] for the protocol details.
 
{| border="0" style="width: 25em;" class="alternategrey sigroktable"
|-
! style="width: 5em; text-align: left;" | Name
! style="width: 5em; text-align: left;" | Register Address
! style="width: 4em; text-align: left;" | Access
|-
| Output State
| 0x0001
| RW
|-
| Protection State
| 0x0002
| R
|-
| Model ID
| 0x0004
| R
|-
| Output Voltage
| 0x0010
| R
|-
| Output Current
| 0x0011
| R
|-
| Output Power high bits
| 0x0012
| R
|-
| Output Power low bits
| 0x0013
| R
|-
| Voltage Target
| 0x0030
| RW
|-
| Current Limit
| 0x0031
| RW
|-
| OVP Value
| 0x0020
| RW
|-
| OCP Value
| 0x0021
| RW
|-
| OPP Value high bits
| 0x0022
| RW
|-
| OPP Value low bits
| 0x0023
| RW
|}
 
1. There is actually no OPP button on the power supply, but the protocol documentation lists, the address for it. Not relevant at the moment for a driver, since sigrok seems to have no OPP support anyway.
In the protocol documentation there is no mention of how to set the presets M1 to M6. But it seems they start at address 0x1000. This needs to be researched still, but I currently do not know how to handle presets in sigrok, so I need to find that out too.
Also there is some other addresses listed in config files that are with the software provided, these need to be researched too.
 
2. The Protection State registers contains looks as follow and the designated bit goes high if the protection state is active:
{| border="0" style="width: 25em;" class="alternategrey sigroktable"
|-
! style="width: 5em; text-align: left;" | Bit
! style="width: 5em; text-align: left;" | Designation
|-
| 0
| OVP
|-
| 1
| OCP
|-
| 2
| OPP
|-
| 3
| OTP
|-
| 4
| SCP
|-
| 5
|
|-
| 6
|
|-
| 7
|
|-
| 8
|
|}
the 2nd byte does not give any information, and seems to always be 0.


== See also ==
== See also ==

Latest revision as of 19:19, 1 February 2021

ROCKSEED RS310P
Rockseed rs310p.jpg
Status in progress
Source code etommens-etm-xxxxp
Channels 1
Voltage/current (CH1) varies
Connectivity serial over USB
Features programmable presets, values, output, over-(voltage,current,power) thresholds.

Please note: This page is a work in progress, more to come. This is a very low cost programmable switching power-supply providing up to 30V and 10A.

See ETommens eTM-xxxxP Series for information common to all devices in this series.

Hardware

Model Topology Voltage Current Max Power
RS310P Buck 0-30V 0-10A 300W

Protocol

See ETommens eTM-xxxxP Series#Protocol for the protocol details.

See also

Retrieved from "https://sigrok.org/w/index.php?title=RockSeed_RS310P&oldid=16017"