Difference between revisions of "Agilent 34410A"
Jump to navigation
Jump to search
(Adding new benchtop DMM) |
|||
| Line 1: | Line 1: | ||
{{Infobox multimeter | {{Infobox multimeter | ||
| name = Agilent 34410A | | name = Agilent 34410A | ||
| status = | | status = supported | ||
| source_code_dir = scpi-dmm | | source_code_dir = scpi-dmm | ||
| counts = 10000 | | counts = 10000 | ||
| Line 14: | Line 14: | ||
It was discontinued on 2016-12-01 and is now replaced by the [[Keysight_34465A]]. | It was discontinued on 2016-12-01 and is now replaced by the [[Keysight_34465A]]. | ||
== Example use == | |||
Scan for connected devices: | |||
$ '''sigrok-cli -d scpi-dmm --scan''' | |||
If other supported models, multiple devices of the same type are connected, or for Ethernet connections: | |||
$ '''sigrok-cli -d scpi-dmm:conn=0957.0607 --scan''' | |||
$ '''sigrok-cli -d scpi-dmm:conn=3.15 --scan''' | |||
$ '''sigrok-cli -d scpi-dmm:conn=tcp-raw/1.2.3.4/5025 --scan''' | |||
See [[Connection parameters]] for more details. | |||
Check the capabilities of the meter's driver, and current state of settings: | |||
$ '''sigrok-cli -d scpi-dmm --show''' | |||
Get or set the meter's current function: | |||
$ '''sigrok-cli -d scpi-dmm --get measured_quantity''' | |||
$ '''sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set''' | |||
Acquire measurement data, in the current mode or in another specified mode: | |||
$ '''sigrok-cli -d scpi-dmm --continuous''' | |||
$ '''sigrok-cli -d scpi-dmm --time 10s''' | |||
$ '''sigrok-cli -d scpi-dmm --samples 10 -c measured_quantity=current/dc''' | |||
[[Category:Device]] | |||
[[Category:Multimeter]] | |||
[[Category:Supported]] | |||
Latest revision as of 12:03, 28 July 2020
| Status | supported |
|---|---|
| Source code | scpi-dmm |
| Counts | 10000 |
| IEC 61010-1 | CAT II (300V) |
| Connectivity | LAN LXI class C, USB TMC, GPIB |
| Measurements | voltage, current, resistance, capacitance, diode, frequency, period, continuity, temperature |
| Features | autorange, true RMS, data hold, min/max/avg/sdev, relative, four-wire resistance, front/rear terminals, external trigger |
| Website | [1] |
The 34410A is a replacement for the HP/Agilent/Keysight 34401A with higher performance but retaining a compatible protocol. It's a benchtop multimeter with LAN/USB/GPIB as standard.
It was discontinued on 2016-12-01 and is now replaced by the Keysight_34465A.
Example use
Scan for connected devices:
$ sigrok-cli -d scpi-dmm --scan
If other supported models, multiple devices of the same type are connected, or for Ethernet connections:
$ sigrok-cli -d scpi-dmm:conn=0957.0607 --scan $ sigrok-cli -d scpi-dmm:conn=3.15 --scan $ sigrok-cli -d scpi-dmm:conn=tcp-raw/1.2.3.4/5025 --scan
See Connection parameters for more details.
Check the capabilities of the meter's driver, and current state of settings:
$ sigrok-cli -d scpi-dmm --show
Get or set the meter's current function:
$ sigrok-cli -d scpi-dmm --get measured_quantity $ sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set
Acquire measurement data, in the current mode or in another specified mode:
$ sigrok-cli -d scpi-dmm --continuous $ sigrok-cli -d scpi-dmm --time 10s $ sigrok-cli -d scpi-dmm --samples 10 -c measured_quantity=current/dc