Difference between revisions of "Instrustar ISDS205X"

Latest revision as of 13:31, 19 January 2019

The Instrustar ISDS205X is a USB-based

2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate,
2-channel "data recorder" (same as oscilloscope, simply storing the analog data),
2-channel spectrum analyzer with an analog bandwidth of 20MS/s,
1-channel DDS signal generator (sine, square, triangle, up sawtooth, down sawtooth); sine up to 20MHz, rest up to 2MHz,
8/16-channel logic analyzer with a max. sampling rate of 24MHz.

See Instrustar ISDS205X/Info for more details (such as lsusb -v output) on the device.

Cypress FX2 pinout:

PD5	1-	O	-100
PD6	2-		-99
PD7	3-		-98
GND	4-		-97
CLKOUT	5-		-96
VCC	6-		-95
GND	7-		-94
RDY0/*SLRD	8-		-93
RDY1/*SLWR	9-		-92
AVCC	10-		-91
(24MHz crystal) XTALOUT	11-		-90
(24MHz crystal) XTALIN	12-		-89
AGND	13-		-88
AVCC	14-		-87
(USB D+) DPLUS	15-		-86
(USB D-) DMINUS	16-		-85
AGND	17-		-84
VCC	18-		-83
GND	19-		-82
(CTL0, AD9288 ENCA/B) *IFCLK	20-		-81
RESERVED	21-		-80
(EEPROM SCL) SCL	22-		-79
(EEPROM SDA) SDA	23-		-78
VCC	24-		-77
PB0	25-		-76
PB1	26-		-75
PB2	27-		-74
PB3	28-		-73
PB4	29-		-72
PB5	30-		-71
PB6	31-		-70
PB7	32-		-69
GND	33-		-68
VCC	34-		-67
GND	35-		-66
CTL0 (IFCLK, AD9288 ENCA/B)	36-		-65
CTL1	37-		-64	PC7
CTL2	38-		-63	PC6
VCC	39-		-62	PC5
PA0 (74HC595D, DS)	40-		-61	PC4
PA1 (74HC595D, STCP)	41-		-60	PC3
PA2 (74HC595D, SHCP)	42-		-59	PC2
PA3 (SHCP, Frequency Generator)	43-		-58	PC1
PA4 (DS, Frequency Generator)	44-		-57	PC0 (Used as input, unknown)
PA5 (STCP, Frequency Generator)	45-		-56	PD4
PA6 (1kHz scope cal pin)	46-		-55	PD3
PA7 (activate analog mode vs digital mode)	47-		-54	PD2
GND	48-		-53	PD1
RESET#	49-		-52	PD0
VCC	50-		-51	*WAKEUP

NXP 74HC595D pinout:

NXP 74HC4051D (upper/lower, CH1/CH2) pinout:

Microchip 24LC02B (top / bottom) pinout:

@@ Line 32: / Line 32: @@
 <small>
-{{chip_56pin
+{{chip_100pin
 | 1=PD5
 | 2=PD6
@@ Line 58: / Line 58: @@
 | 23=<span style="color:purple">(EEPROM SDA)</span> SDA
 | 24=VCC
 | 25=PB0
 | 26=PB1
 | 27=PB2
@@ Line 81: / Line 81: @@
 | 45=PA5 <span style="color:red">(STCP, Frequency Generator)</span>
 | 46=PA6 <span style="color:magenta">(1kHz scope cal pin)</span>
-| 47=PA7
+| 47=PA7 <span style="color:red">(activate analog mode vs digital mode)</span>
 | 48=GND
 | 49=RESET#
@@ Line 91: / Line 91: @@
 | 55=PD3
 | 56=PD4
+| 57=PC0 <span style="color:red">(Used as input, unknown)</span>
+| 58=PC1
+| 59=PC2
+| 60=PC3
+| 61=PC4
+| 62=PC5
+| 63=PC6
+| 64=PC7
 }}