Difference between revisions of "PeakTech 3330"

From sigrok
Jump to navigation Jump to search
(Peaktech 3330 photo gallery entries)
(replace P3330 images by cropped/scaled versions)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox multimeter
{{Infobox multimeter
| image          = [[File:P3330_device_front.jpg|180px]]
| image          = [[File:Peaktech 3330 mugshot.png|180px]]
| name            = Peaktech 3330
| name            = PeakTech 3330
| status          = supported
| status          = supported
| source_code_dir = serial-dmm
| source_code_dir = serial-dmm
Line 9: Line 9:
| measurements    = voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity, temperature
| measurements    = voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity, temperature
| features        = autorange, data hold, relative, backlight, display prompts
| features        = autorange, data hold, relative, backlight, display prompts
| website        = [http://www.peaktech.de/productdetail/kategorie/auslaufmodelle-nur-solange-der-vorrat-reicht/produkt/p-3330.html] (discontinued product, and product page gone offline)
| website        = [http://www.peaktech.de/productdetail/kategorie/auslaufmodelle-nur-solange-der-vorrat-reicht/produkt/p-3330.html peaktech.de]
}}
}}


The '''Peaktech 3330''' is a 4000 counts, CAT III (1000V) handheld digital multimeter
The '''PeakTech 3330''' is a 4000 counts, CAT III (1000V) handheld digital multimeter with RS232 or USB connectivity.
with RS232 or USB connectivity.  Accuracy is 0.5% in the DC voltage range.


In addition to the usual features, the display presents the internal temperature,
In addition to the usual features, the display presents the internal temperature, and has extra indicators and prompts (disconnect power from the circuit under test for passive measurement functions, which jacks to connect the probes to depending on the selected function, when a fuse is blown).
and has extra indicators and prompts (disconnect power from the circuit under test
 
for passive measurement functions, which jacks to connect the probes to depending
See [[PeakTech 3330/Info]] for more details (such as '''lsusb -v''' output) about the device.
on the selected function, when a fuse is blown).


== Hardware ==
== Hardware ==
Line 28: Line 26:
* '''Fuse''': 500mA/250V (glass)
* '''Fuse''': 500mA/250V (glass)


The U1 chip is labelled FS9711_LP3, but works flawlessly with
The U1 chip is labelled FS9711_LP3, but works flawlessly with all existing routines for FS9721. Only a TX LED is fitted in the DMM.
all existing routines for FS9721. Only a TX LED is fitted in the DMM.


The fuses do NOT match the CAT III 1000V rating
The fuses do NOT match the CAT III 1000V rating which is claimed on the front cover and in the paper!
which is claimed on the front cover and in the paper!


There are two PCBs, with the input circuitry and range switch stacked
There are two PCBs, with the input circuitry and range switch stacked on top of the PCB which holds the DMM chip. The top PCB is labelled "DT-9932B-3" in copper.  The bottom PCB has "DT-9932B-7" as well as "2004.12.11.v.7" silk screen labels. The PCBs are connected by means of several soldered ribbon cables.
on top of the PCB which holds the DMM chip. The top PCB is labelled
"DT-9932B-3" in copper.  The bottom PCB has "DT-9932B-7" as well as
"2004.12.11.v.7" silk screen labels. The PCBs are connected by means
of several soldered ribbon cables.


There is a COB ("U2") on pads with a QFP44 footprint. The chip is close
There is a COB ("U2") on pads with a QFP44 footprint. The chip is close to a big brown THT capacitor (sample'n'hold?), though the meter does not claim TRMS capabilities. Only few pins are connected, it's unlikely to be a display controller.
to a big brown THT capacitor (sample'n'hold?), though the meter does not
claim TRMS capabilities. Only few pins are connected, it's unlikely to
be a display controller.


'''RS232/USB cables''':
'''RS232/USB cables''':


The DMM comes with both RS232 as well as USB cables.
* The DMM comes with both RS232 as well as USB cables.
The USB cable contains a CP2102 chip.
* The USB cable contains a CP2102 chip.
Both cables only have an RX LED.
* Both cables only have an RX LED.
 
See [[Peaktech 3330/Info]] for more details (such as '''lsusb -v''' output) about the device.


== Photos ==
== Photos ==
'''Multimeter''':


<gallery>
<gallery>
File:P3330_front_holster.jpg|<small>front, in holster</small>
File:P3330_front_holster.png|<small>Device, top, in holster</small>
File:P3330_device_front.jpg|<small>front view</small>
File:P3330_device_front.png|<small>Device, top</small>
File:P3330_device_back.jpg|<small>back view</small>
File:P3330_device_back.png|<small>Device, bottom</small>
File:P3330_lcd_indicator.jpg|<small>LCD, indicators</small>
File:P3330_lcd_indicator.png|<small>LCD, indicators</small>
File:P3330_lcd_backlight.jpg|<small>LCD, backlight</small>
File:P3330_lcd_backlight.png|<small>LCD, backlight</small>
File:P3330_range_labels.jpg|<small>range selector, cert labels</small>
File:P3330_range_labels.png|<small>Range selector, cert labels</small>
File:P3330_serial_cables.jpg|<small>serial cables</small>
File:P3330_serial_cables.png|<small>Serial cables</small>
File:P3330_pcb_input.jpg|<small>PCB, input section</small>
File:P3330_pcb_input.png|<small>PCB, input section</small>
File:P3330_pcb_dmmchip.jpg|<small>PCB, DMM chip</small>
File:P3330_pcb_dmmchip.png|<small>PCB, DMM chip</small>
File:P3330_pcb_dmmchip_closeup.jpg|<small>PCB, DMM chip, closeup</small>
File:P3330_pcb_dmmchip_closeup.png|<small>PCB, DMM chip, closeup</small>
File:P3330_pcb_twoboard.jpg|<small>PCB, two board construction</small>
File:P3330_pcb_twoboard.png|<small>PCB, two board construction</small>
</gallery>
</gallery>


Line 79: Line 64:
== Resources ==
== Resources ==


* [http://www.peaktech.de/productdetail/kategorie/auslaufmodelle-nur-solange-der-vorrat-reicht/produkt/p-3330.html] (product page in the vendor's "discontinued" section, has been removed from the website in the meantime)
* [http://www.peaktech.de/productdetail/kategorie/auslaufmodelle-nur-solange-der-vorrat-reicht/produkt/p-3330.html Product page] (it's in the vendor's "discontinued" section, has been removed from the website in the meantime)


[[Category:Device]]
[[Category:Device]]
[[Category:Multimeter]]
[[Category:Multimeter]]
[[Category:Supported]]
[[Category:Supported]]

Latest revision as of 21:26, 12 February 2017

PeakTech 3330
Peaktech 3330 mugshot.png
Status supported
Source code serial-dmm
Counts 4000
IEC 61010-1 CAT III (1000V)
Connectivity USB and RS232 cables
Measurements voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity, temperature
Features autorange, data hold, relative, backlight, display prompts
Website peaktech.de

The PeakTech 3330 is a 4000 counts, CAT III (1000V) handheld digital multimeter with RS232 or USB connectivity.

In addition to the usual features, the display presents the internal temperature, and has extra indicators and prompts (disconnect power from the circuit under test for passive measurement functions, which jacks to connect the probes to depending on the selected function, when a fuse is blown).

See PeakTech 3330/Info for more details (such as lsusb -v output) about the device.

Hardware

Multimeter:

  • Multimeter IC: Fortune Semiconductor FS9721_LP3
  • Crystal: 4MHz (markings: "4.000")
  • Fuse: 20A/500V (markings: HUKE R015 / RT14 RT18 / RT19)
  • Fuse: 500mA/250V (glass)

The U1 chip is labelled FS9711_LP3, but works flawlessly with all existing routines for FS9721. Only a TX LED is fitted in the DMM.

The fuses do NOT match the CAT III 1000V rating which is claimed on the front cover and in the paper!

There are two PCBs, with the input circuitry and range switch stacked on top of the PCB which holds the DMM chip. The top PCB is labelled "DT-9932B-3" in copper. The bottom PCB has "DT-9932B-7" as well as "2004.12.11.v.7" silk screen labels. The PCBs are connected by means of several soldered ribbon cables.

There is a COB ("U2") on pads with a QFP44 footprint. The chip is close to a big brown THT capacitor (sample'n'hold?), though the meter does not claim TRMS capabilities. Only few pins are connected, it's unlikely to be a display controller.

RS232/USB cables:

  • The DMM comes with both RS232 as well as USB cables.
  • The USB cable contains a CP2102 chip.
  • Both cables only have an RX LED.

Photos

Protocol

See Multimeter_ICs#Fortune_Semiconductor_FS9721_LP3 for the DMM IC protocol.

Serial communication is controlled by the yellow "RS232" button.

Resources

  • Product page (it's in the vendor's "discontinued" section, has been removed from the website in the meantime)