Difference between revisions of "Gossen Metrawatt Metrahit X-Tra"

From sigrok
Jump to navigation Jump to search
m (Intermediate storage)
m (Status: planned -> in progress)
 
(4 intermediate revisions by the same user not shown)
Line 2: Line 2:
| image          = <!-- [[File:Gossen_Metrawatt_Metrahit_25S_Logo.png|180px]] -->
| image          = <!-- [[File:Gossen_Metrawatt_Metrahit_25S_Logo.png|180px]] -->
| name            = Gossen Metrawatt Metrahit X-Tra
| name            = Gossen Metrawatt Metrahit X-Tra
| status          = planned
| status          = in progress
| source_code_dir = <!-- gmc-mh-sl -->
| source_code_dir = <!-- gmc-mh-sl -->
| counts          = 31000
| counts          = 31000
| categories      = CAT III 1000 V, CAT IV 600 V
| categories      = CAT III 1000 V, CAT IV 600 V
| connectivity    = Infrared (USB)
| connectivity    = Infrared (USB)
| measurements    = voltage, current, resistance, capacitance, temperature, frequency, diode, continuity
| measurements    = voltage, current, resistance, capacitance, temperature, frequency, duty cycle, diode, continuity
| features        = autorange, data hold
| features        = autorange, data hold
| website        = [http://www.gossenmetrawatt.com/english/produkte/metrahitx-tra.htm]
| website        = [http://www.gossenmetrawatt.com/english/produkte/metrahitx-tra.htm]
Line 33: Line 33:
-->
-->
== Using the device with sigrok ==
== Using the device with sigrok ==
The device is planned to be supported using a [[Gossen_Metrawatt#USB_X-Tra | USB X-Tra interface]] or similar IR to USB interface.<!-- by the driver gmc-mh-1x-2x-rs232 (actually this should work, but with [[User:Matthias Heidbrink | Matthias']] test device it did not, so it's untested). Set the multimeter to use the communication adaptor ''RS232''. -->
The device is planned to be supported using a [[Gossen_Metrawatt#USB_X-Tra | USB X-Tra interface]] or similar IR to USB interface.<!-- by the driver gmc-mh-sl. -->


== Measurement functions and ranges ==
== Measurement functions and ranges ==
Line 82: Line 82:
| 100 mV
| 100 mV
| 10 µV
| 10 µV
| ±(1% + 30) (> 300 Digit))
| ±(1% + 30) (> 300 Digit)
| mq V, unit V, mqflags AC,RMS
| mq V, unit V, mqflags AC,RMS
| min. 200 µV
| min. 200 µV
Line 89: Line 89:
| 1 V
| 1 V
| 100 μV
| 100 μV
| rowspan="4" | ±(0,5% + 30) (> 200 Digit))
| rowspan="4" | ±(0,5% + 30) (> 200 Digit)
| "
| "
|  
|  
Line 110: Line 110:
| "
| "
|  
|  
|-
| rowspan="5" | V≃
| 100 mV
| 10 µV
| rowspan="5" | ±(1% + 30) (> 300 Digit)
| mq V, unit V, mqflags AC,DC,RMS
| min. 200 µV


|-
|-
| rowspan="6" | XXX A=
| 1 V
| 300.00 µA
| 100 μV
| "
|
 
|-
| 10 V
| 1 mV
| "
|
 
|-
| 100 V
| 10 mV
| "
|
 
|-
| 1000 V
| 100 mV
| "
|
 
|-
| rowspan="6" | A=
| 100.00 µA
| 10 nA
| 10 nA
| rowspan="2" | 0,1% + 5
| rowspan="4" | 0,5% + 3
| mq Curr., unit A, mqflags DC
| mq Curr., unit A, mqflags DC
|
|-
| 1.0000 mA
| 100 nA
| "
|
|-
| 10.000 mA
| 1 µA
| "
|
|-
| 100.00 mA
| 10 µA
| "
|
|-
| 1.0000 A
| 100 µA
| rowspan="2" | 0,9% + 10
| "
|
|-
| 10.000 A
| 1 mA
| "
|
|-
| rowspan="6" | A≃
| 100.00 µA
| 10 nA
| rowspan="6" | 1,5% + 10
| mq Curr., unit A, mqflags AC,RMS
|  
|  


Line 127: Line 199:
|-
|-
| 30.000 mA
| 30.000 mA
| 1 mA
| 1 µA
| 0,05% + 5
| "
| "
|  
|  
Line 135: Line 206:
| 300.00 mA
| 300.00 mA
| 10 µA
| 10 µA
| 0,5% + 5
| "
| "
|  
|  
Line 142: Line 212:
| 3.0000 A
| 3.0000 A
| 100 µA
| 100 µA
| rowspan="2" | 0,5% + 10
| "
| "
|  
|  
Line 153: Line 222:


|-
|-
| rowspan="6" | XXX A≃
| rowspan="6" | A≃
| 300.00 µA
| 100.00 µA
| 10 nA
| 10 nA
| rowspan="4" | 0,5% + 30
| rowspan="6" | 1,5% + 30
| mq Curr., unit A, mqflags AC,DC,RMS
| mq Curr., unit A, mqflags AC,DC,RMS
|  
|  
Line 181: Line 250:
| 3.0000 A
| 3.0000 A
| 100 µA
| 100 µA
| rowspan="2" | 0,75% + 30
| "
| "
|  
|  
Line 190: Line 258:
| "
| "
|  
|  
|-
|-
| rowspan="6" | XXX Ω
| rowspan="7" | Ω
| 300.00 Ω
| 100.00 Ω
| 10 mΩ
| 10 mΩ
| rowspan="5" | 0,1% + 5
| rowspan="5" | 0,2% + 5
| mq Res., unit Ω, mqflags -
| mq Res., unit Ω, mqflags -
|
|


|-
|-
| 3.0000 kΩ
| 1.0000 kΩ
| 100 mΩ
| 100 mΩ
| "
| "
Line 205: Line 274:


|-
|-
| 30.000 kΩ
| 10.000 kΩ
| 1 Ω
| 1 Ω
| "
| "
Line 211: Line 280:


|-
|-
| 300.00 kΩ
| 100.00 kΩ
| 10 Ω
| 10 Ω
| "
| "
Line 217: Line 286:


|-
|-
| 3.0000 MΩ
| 1.0000 MΩ
| 100 Ω
| 100 Ω
| "
| "
Line 223: Line 292:


|-
|-
| 30.000 MΩ
| 10.000 MΩ
| 1k Ω
| 1 kΩ
| 2% + 5
| 0,5% + 10
| "
|
 
|-
| 40.00 MΩ
| 10 kΩ
| 2% + 10
| "
| "
|  
|  


|-
|-
| XXX Ohm/Cont.
| Ohm/Cont.
| 300 Ω
| 100 Ω
| 100 mΩ
| 100 mΩ
| 1% + 3%
| 3% + 3%
| mq Res., unit Ω, mqflags -
| mq Res., unit Ω, mqflags -
|  
| max. 8 V/ca. 1 mA


|-
|-
| XXX Diode
| Diode
| 3 V
| 5,1 V
| 1 mV
| 1 mV
| 0.2% + 3
| 0.5% + 3
| mq V, unit V, mqflags DC,DIODE
| mq V, unit V, mqflags DC,DIODE
|  
| max. 8 V/ca. 1 mA


|-
|-
| rowspan="8" | XXX Cap. F
| rowspan="6" | Cap. F
| 3.000 nF
| 10.00 nF
| 1 pF
| 10 pF
| rowspan="5" | 1.0% + 5
| rowspan="4" | 1.0% + 6
| mq Cap., unit F, mqflags -
| mq Cap., unit F, mqflags -
|
|


|-
|-
| 30.00 nF
| 100.0 nF
| 10 pF
| "
|
 
|-
| 300.0 nF
| 100 pF
| 100 pF
| "
| "
Line 266: Line 336:


|-
|-
| 3.000 µF
| 1.000 µF
| 1 nF
| 1 nF
| "
| "
Line 272: Line 342:


|-
|-
| 30.00 µF
| 10.00 µF
| 10 nF
| 10 nF
| "
| "
Line 278: Line 348:


|-
|-
| 300.0 µF
| 100.0 µF
| 100 nF
| 100 nF
| rowspan="2" | ±(5.0% + 6)
| rowspan="2" | ±(5.0% + 6)
Line 285: Line 355:


|-
|-
| 3.000 mF
| 1000 µF
| 1 µF
| "
|
 
|-
| 30.00 mF
| 1 µF
| 1 µF
| ±(5.0% + 30)
| "
| "
|  
|  
Line 315: Line 378:
| 0.01 Hz - 100 Hz
| 0.01 Hz - 100 Hz
| "
| "
| MHz mode, voltage must not exceed 5 V!
| 3 ranges; TTL voltage (5 V) only!


|-
|-
Line 356: Line 419:
| rowspan="2" | ±(0,3% +15)
| rowspan="2" | ±(0,3% +15)
| mq Temp., unit °C/°F, mqflags -
| mq Temp., unit °C/°F, mqflags -
| Measurement switchable between °C and °F.
| Multimeter switchable between °C and °F.


|-
|-
Line 371: Line 434:
|-
|-
|}
|}
The ''Accuracy'' row was simplified, see manual for exact specs.
The column ''Accuracy'' was simplified, see manual for exact specs.


The column "sigrok result" contains in short form what the driver generates for the resp. data type.
The column "sigrok result" contains in short form what the driver generates for the resp. data type.

Latest revision as of 11:08, 9 April 2016

Gossen Metrawatt Metrahit X-Tra
Status in progress
Counts 31000
IEC 61010-1 CAT III 1000 V, CAT IV 600 V
Connectivity Infrared (USB)
Measurements voltage, current, resistance, capacitance, temperature, frequency, duty cycle, diode, continuity
Features autorange, data hold
Website [1]

The Gossen Metrawatt Metrahit X-Tra is a 4.5 digit, 12000 counts 1000V CAT III/600 V CAT IV handheld digital multimeter with IR (USB) connectivity.

Hardware

  • Power supply:
    • Battery: 2x 1,5 V IEC R 6, IEC LR 6 or corresponding NiCd rechargeable batteries
  • Fuse:
    • Current: FF (UR) 10 A/1000 V AC/DC (30 kA) 10 mm x 38 mm

Using the device with sigrok

The device is planned to be supported using a USB X-Tra interface or similar IR to USB interface.

Measurement functions and ranges

Measurement function Range Resolution Accuracy sigrok result Remarks
V= 100 mV 10 μV ±(0,09% 3) mq V, unit V, mqflags DC with ZERO
1 V 100 μV ±(0,05% 3)
10 V 1 mV "
100 V 10 mV "
1000 V 100 mV "
V≈ 100 mV 10 µV ±(1% + 30) (> 300 Digit) mq V, unit V, mqflags AC,RMS min. 200 µV
1 V 100 μV ±(0,5% + 30) (> 200 Digit) "
10 V 1 mV "
100 V 10 mV "
1000 V 100 mV "


V≃ 100 mV 10 µV ±(1% + 30) (> 300 Digit) mq V, unit V, mqflags AC,DC,RMS min. 200 µV
1 V 100 μV "
10 V 1 mV "
100 V 10 mV "
1000 V 100 mV "
A=  100.00 µA 10 nA 0,5% + 3 mq Curr., unit A, mqflags DC
1.0000 mA 100 nA "
10.000 mA 1 µA "
100.00 mA 10 µA "
1.0000 A 100 µA 0,9% + 10 "
10.000 A 1 mA "
A≃  100.00 µA 10 nA 1,5% + 10 mq Curr., unit A, mqflags AC,RMS
3.0000 mA 100 nA "
30.000 mA 1 µA "
300.00 mA 10 µA "
3.0000 A 100 µA "
10.000 A 1 mA "
A≃  100.00 µA 10 nA 1,5% + 30 mq Curr., unit A, mqflags AC,DC,RMS
3.0000 mA 100 nA "
30.000 mA 1 µA "
300.00 mA 10 µA "
3.0000 A 100 µA "
10.000 A 1 mA "
Ω 100.00 Ω 10 mΩ 0,2% + 5 mq Res., unit Ω, mqflags -
1.0000 kΩ 100 mΩ "
10.000 kΩ 1 Ω "
100.00 kΩ 10 Ω "
1.0000 MΩ 100 Ω "
10.000 MΩ 1 kΩ 0,5% + 10 "
40.00 MΩ 10 kΩ 2% + 10 "
Ohm/Cont. 100 Ω 100 mΩ 3% + 3% mq Res., unit Ω, mqflags - max. 8 V/ca. 1 mA
Diode 5,1 V 1 mV 0.5% + 3 mq V, unit V, mqflags DC,DIODE max. 8 V/ca. 1 mA
Cap. F 10.00 nF 10 pF 1.0% + 6 mq Cap., unit F, mqflags -
100.0 nF 100 pF "
1.000 µF 1 nF "
10.00 µF 10 nF "
100.0 µF 100 nF ±(5.0% + 6) "
1000 µF 1 µF "
Hz (V) 100.00 Hz 0.01 Hz ±(0.05% + 3) mq Freq., unit Hz, mqflags AC,DC
100.00 kHz 10 Hz "
100.00 Hz -
1.0000 MHz 		0.01 Hz - 100 Hz " 3 ranges; TTL voltage (5 V) only!
Hz (A) 1,0000 kHz 0.1 Hz mq Freq., unit Hz, mqflags AC,DC
30.00 kHz 10 Hz "
% 2,0-98%
100 Hz - 1 kHz 		0.01 % ±(0,1%) mq Duty., unit %, mqflags -
5,0-95%
... - 10 kHz 		±(0,1% per kHz) "
10-90%
... - 100 kHz 		"


°C/°F Pt100
–200.0 - +850.0 °C 		0.1 °C ±(0,3% +15) mq Temp., unit °C/°F, mqflags - Multimeter switchable between °C and °F.
Pt1000
-150.0 - +850.0 °C 		"
Type K
-250 - +1372.0 °C 		±(1% + 5K) "

The column Accuracy was simplified, see manual for exact specs.

The column "sigrok result" contains in short form what the driver generates for the resp. data type.

Retrieved from "https://sigrok.org/w/index.php?title=Gossen_Metrawatt_Metrahit_X-Tra&oldid=11629"