Difference between revisions of "Siemens B1026"
Jump to navigation
Jump to search
(Created page with "{{Infobox multimeter | image = <!-- 180px --> | name = Siemens B1026 | status = supported | source_code_dir = norma-dmm ...") |
|||
| Line 5: | Line 5: | ||
| source_code_dir = norma-dmm | | source_code_dir = norma-dmm | ||
| counts = 21000 | | counts = 21000 | ||
| categories = CAT II 600 | | categories = CAT II 600 V | ||
| connectivity = RS232, proprietary cable | | connectivity = RS232, proprietary cable | ||
| measurements = voltage, current, resistance, capacitance, temperature, diode, continuity | | measurements = voltage, current, resistance, capacitance, temperature, diode, continuity | ||
| Line 12: | Line 12: | ||
}} | }} | ||
The '''Siemens B1026''' is a 21000 counts, handheld digital multimeter with optional RS232 connectivity. | The '''Siemens B1026''' is a 21000 counts, CAT II (600 V) handheld digital multimeter with optional RS232 connectivity. | ||
See [[Norma DM950]] for further information on all models of the series, including RS232 interface. | See [[Norma DM950]] for further information on all models of the series, including RS232 interface. The RS232 interface requires an internal interface board (below the 5 holes in the back of the case) and a special cable and adaptor. Depending on the model, they came with the device or were available as accessory ''Interface B9102, 7KB9102-8DD''. | ||
== Hardware == | == Hardware == | ||
Revision as of 13:41, 8 June 2014
| Status | supported |
|---|---|
| Source code | norma-dmm |
| Counts | 21000 |
| IEC 61010-1 | CAT II 600 V |
| Connectivity | RS232, proprietary cable |
| Measurements | voltage, current, resistance, capacitance, temperature, diode, continuity |
| Features | autorange, data hold, bargraph, backlight |
| Website | set.nl |
The Siemens B1026 is a 21000 counts, CAT II (600 V) handheld digital multimeter with optional RS232 connectivity.
See Norma DM950 for further information on all models of the series, including RS232 interface. The RS232 interface requires an internal interface board (below the 5 holes in the back of the case) and a special cable and adaptor. Depending on the model, they came with the device or were available as accessory Interface B9102, 7KB9102-8DD.
Hardware
- Fuses
- 2A: F 2A/250V DIN 41660-F2
- 10A: FF 12,5A/500 V, >20kA/AC
- TODO
Photos
Multimeter: