Difference between revisions of "Serial port"

From sigrok
Jump to navigation Jump to search
Line 6: Line 6:


= USB to Serial Converters =
= USB to Serial Converters =
To operate devices that have RS-232 or TTL serial interfaces on computers that have only USB interfaces, converters are available. Many different chipsets exist that have slightly different properties, often supporting only a subset of what common UARTs like the 8250/16550A can do. Please note that a driver for the respective operating system is required (sometimes included in the OS already, e.g. mostly for Linux).
To operate devices that have RS-232 or TTL serial interfaces on computers that have only USB interfaces, converters are available. Many different chipsets exist that have slightly different properties, often supporting only a subset of what common UARTs like the 8250/16550A can do. Please note that a chipset-specific driver for the respective operating system is required (sometimes included in the OS already, e.g. mostly for Linux).
Many original USB cables from manufacturers use these converters, too, either with the chip manufacturer's or a custom USB ID.
Many original USB cables from manufacturers use these converters, too, either with the chip manufacturer's or a custom USB ID.


Some RS232 devices won't work on RS232-USB converters because they need a higher RS232 signal voltage than supplied by most of these converters, e.g. to drive optocouplers in the interface.
Most of the USB to serial converter chipsets deliver 3.3 V or 5V TTL level signals and an additional converter chip between signal levels usually called a ''Line Driver/Receiver'', e.g. a [http://en.wikipedia.org/wiki/MAX232 Maxim MAX232], is required to interface to a RS232 or other interface that uses different signal levels.
 
Common chipsets are:
The RS232 standard allows quite a huge span of 3 to 15 V resp. -3 to -15 V for the two signal levels. Some RS232 devices won't work on USB-RS232 converters because these converters tend to be at the lower end of these voltages and the devices need need a higher RS232 signal voltage to work, e.g. to drive optocouplers in the interface. Sometimes a device might work on a converter of type A and won't on a converter of type B, depending on the chips used and other parameters chosen by the manufacturer.


== Common USB to Serial converter chipsets ==
{|border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
{|border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-  
|-  
Line 138: Line 139:


|}
|}
== Common Serial to RS232 Line Driver/Receiver Chipset Manufacturers ==
* [http://para.maximintegrated.com/results.mvp?fam=rs232 Maxim]
* [http://www.zywyn.com/ ZyWyn]

Revision as of 19:29, 1 December 2013


Serial Ports are a common way to communicate with devices. The most common serial ports, as used by devices like Metex/Voltcraft multimeters, are RS-232 interfaces.


USB to Serial Converters

To operate devices that have RS-232 or TTL serial interfaces on computers that have only USB interfaces, converters are available. Many different chipsets exist that have slightly different properties, often supporting only a subset of what common UARTs like the 8250/16550A can do. Please note that a chipset-specific driver for the respective operating system is required (sometimes included in the OS already, e.g. mostly for Linux). Many original USB cables from manufacturers use these converters, too, either with the chip manufacturer's or a custom USB ID.

Most of the USB to serial converter chipsets deliver 3.3 V or 5V TTL level signals and an additional converter chip between signal levels usually called a Line Driver/Receiver, e.g. a Maxim MAX232, is required to interface to a RS232 or other interface that uses different signal levels.

The RS232 standard allows quite a huge span of 3 to 15 V resp. -3 to -15 V for the two signal levels. Some RS232 devices won't work on USB-RS232 converters because these converters tend to be at the lower end of these voltages and the devices need need a higher RS232 signal voltage to work, e.g. to drive optocouplers in the interface. Sometimes a device might work on a converter of type A and won't on a converter of type B, depending on the chips used and other parameters chosen by the manufacturer.

Common USB to Serial converter chipsets

Manufacturer Type USB Data Bits Non-standard baud rates Max. baud rate Homepage Remarks
 Asix (former MOSChip) MCS7703 1.1 [1] 1 serial port; out of production
MCS7710 1.1 [2] 1 serial port; out of production
MCS7815 1.1 [3] 1 serial, 1 parallel port
MCS7717 1.1 [4] 1 serial, 1 parallel port and 3-port USB hub; out of production
MCS7720 1.1 [5] 2 serial ports
MCS7810 2.0 [6] 1 serial port
MCS7820 2.0 [7] 2 serial ports
MCS7840 2.0 5-8 yes; broken on Mac [8] 4 serial ports
FTDI many 7,8 [9]
Prolific PL-2302x 7,8 [10]
Prolific Fake (PL-2302) It seems that fakes of prolific chips with limited reliability exist.1
SiLabs CP21xx 5,6,7,8 2 Mbps [11] Family of several devices

Common Serial to RS232 Line Driver/Receiver Chipset Manufacturers