Difference between revisions of "Hantek PSO2020"

From sigrok
Jump to navigation Jump to search
m
 
(11 intermediate revisions by 3 users not shown)
Line 11: Line 11:
| display            = none
| display            = none
| connectivity        = USB
| connectivity        = USB
| website            = [http://www.hantek.com/en/ProductDetail_2_5163.html hantek.com]
}}
}}


The '''Hantek PSO2020''' is a USB-based, 1-channel oscilloscope with an analog bandwidth of 20MS/s and 96MS/s sampling rate.
The '''Hantek PSO2020''' is a USB-based, 1-channel oscilloscope with an analog bandwidth of 20MS/s and 96MS/s sampling rate. Wide input rage, from ±100mV to ±50V.


See [[Hantek PSO2020/Info]] for more details (such as '''lsusb -v''' output) about the device.
See [[Hantek PSO2020/Info]] for more details (such as '''lsusb -v''' output) about the device.
Line 21: Line 22:
* '''USB''': [http://www.cypress.com/documentation/datasheets/cy7c68013a-cy7c68014a-cy7c68015a-cy7c68016a-ez-usb-fx2lp-usb Cypress CY7C68013A-100AXC] (FX2LP) ([http://www.cypress.com/file/138911/download datasheet])
* '''USB''': [http://www.cypress.com/documentation/datasheets/cy7c68013a-cy7c68014a-cy7c68015a-cy7c68016a-ez-usb-fx2lp-usb Cypress CY7C68013A-100AXC] (FX2LP) ([http://www.cypress.com/file/138911/download datasheet])
* '''256-byte I²C EEPROM''': [http://www.microchip.com/wwwproducts/en/24LC02B Microchip 24LC02BI] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''256-byte I²C EEPROM''': [http://www.microchip.com/wwwproducts/en/24LC02B Microchip 24LC02BI] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* ?? 2x '''8-channel analog multiplexer/demultiplexer''': [http://www.nexperia.com/products/logic/switches-multiplexers-de-multiplexers/digital-switches/74HC4051D.html NXP 74HC4051D] ([http://assets.nexperia.com/documents/data-sheet/74HC_HCT4051.pdf datasheet])
* 1x '''8-channel analog multiplexer/demultiplexer''' (U6): [http://www.nexperia.com/products/logic/switches-multiplexers-de-multiplexers/digital-switches/74HC4051D.html NXP 74HC4051D] ([http://assets.nexperia.com/documents/data-sheet/74HC_HCT4051.pdf datasheet])
* '''1A low-dropout voltage regulator (3.3V):''' [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://www.advanced-monolithic.com/pdf/ds1117.pdf datasheet])
* '''1A low-dropout voltage regulator (3.3V):''' [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://www.advanced-monolithic.com/pdf/ds1117.pdf datasheet])
* ?? '''2W, fixed input, isolated & unregulated dual/single output DC/DC converter''': [http://www.mornsun.cn/html/product/content/A_S-2WR2.html Mornsun A_S-2WR2 (A0505S-2WR2)] ([http://www.mornsun.cn/uploads/pdf/A_S-2WR2.pdf datasheet])
* ?? '''2W, fixed input, isolated & unregulated dual/single output DC/DC converter''': [http://www.mornsun.cn/html/product/content/A_S-2WR2.html Mornsun A_S-2WR2 (A0505S-2WR2)] ([http://www.mornsun.cn/uploads/pdf/A_S-2WR2.pdf datasheet])
Line 27: Line 28:
* ?? 4x '''145 MHz FastFET Op Amp''': [http://www.analog.com/en/products/amplifiers/operational-amplifiers/jfet-input-amplifiers/ad8065.html Analog Devices AD8065] ([http://www.analog.com/media/en/technical-documentation/data-sheets/AD8065-KGD-CHIP.pdf datasheet])
* ?? 4x '''145 MHz FastFET Op Amp''': [http://www.analog.com/en/products/amplifiers/operational-amplifiers/jfet-input-amplifiers/ad8065.html Analog Devices AD8065] ([http://www.analog.com/media/en/technical-documentation/data-sheets/AD8065-KGD-CHIP.pdf datasheet])
* '''Crystal''': 24MHz
* '''Crystal''': 24MHz
* 1x '''Photocoupler''' (U100): Toshiba TPL280 ([https://toshiba.semicon-storage.com/info/docget.jsp?did=16751&prodName=TLP280 datasheet])
* 1x '''4.5V Relay''' (used for High Voltage selection - U10): NEC UD2-4.5NU ([http://www.mouser.com/ds/2/212/KEM_R7005_UC2_UD2-541010.pdf datasheet])
* 1x '''±5V DC/DC Coverter''' (U13): INOUT A0505S ([https://www.mornsun-power.com/uploads/pdf/B_LS-1WR2.pdf datasheet])




Line 51: Line 55:
|-
|-
| S1, S2
| S1, S2
| S1=VCC, S2=GND. "Normal operation, data align disabled".
| Tied to VCC. "Data Align Enabled (data from both channels available on rising edge of Clock A. Channel B data is delayed a 1/2 clock cycle).".
|-
|-
| DFS
| DFS
| Tied to GND. Data format select = "offset binary" (not "twos complement").
| Tied to GND. Data format select = "offset binary" (not "twos complement").
|-
| REF_IN_A, REF_IN_B
| Tied to REF_OUT.
|-
|-
| A<sub>IN</sub>A, A<sub>IN</sub>B
| A<sub>IN</sub>A, A<sub>IN</sub>B
Line 61: Line 68:
|}
|}


'''Cypress FX2 pinout (TODO)''':
'''Cypress FX2 pinout''':
{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-
|-
Line 68: Line 75:


|-
|-
| CTL2
| CTL0
| Connected to AD9288 ENC<sub>A</sub> and ENC<sub>B</sub> and FX2 IFCLK.
| Connected to AD9288 ENC<sub>A</sub>, to ENC<sub>B</sub> with an inverter. and to FX2 IFCLK.
|-
|-
| PB0-PB7
| PB0-PB7
| Connected to AD9288 D0<sub>A</sub>-D7<sub>A</sub>.
| Connected to AD9288 D7<sub>A</sub>-D0<sub>A</sub>. '''Bit reversed!''' Must be reversed back in software.
|-
|-
| PD0-PD7
| PD0-PD7
| Connected to AD9288 D0<sub>B</sub>-D7<sub>B</sub>.
| Connected to AD9288 D0<sub>B</sub>-D7<sub>B</sub>.
|-
| PA0, PA1, PA5 (Inputs)
| Connected to the 3 buttons
|-
| PC0, PC3, PE?, PE? (Inputs)
| Connected to the front selector
|-
| PC1
| Connected to S1 of the 74HC4051D mux
|-
| PC2
| Connected to S0 of the 74HC4051D mux
|-
| PC4
| AC/DC Selector
|-
|-
| PA7
| PA7
| High Voltage Rele'
| Voltage Selection Relay
|-
| PA6
| Green LED
|-
|-
| PC6
| PE1
| Green LED.
| Front light
 
|-
 
| PE2
| Red LED
|}
|}


Line 95: Line 121:
File:Hantek_PSO2020_2.JPG|<small>Inside Back</small>
File:Hantek_PSO2020_2.JPG|<small>Inside Back</small>
File:Hantek_PSO2020_3.JPG|<small>Inside Detail</small>
File:Hantek_PSO2020_3.JPG|<small>Inside Detail</small>
File:Pso2020_analog_input.jpg|<small>Analog input section</small>
</gallery>
</gallery>


Line 103: Line 130:
'''Note''': The firmware is '''not''' flashed into the device permanently! It will be automatically "uploaded" to the Cypress FX2's SRAM every time you attach the device to a USB port.
'''Note''': The firmware is '''not''' flashed into the device permanently! It will be automatically "uploaded" to the Cypress FX2's SRAM every time you attach the device to a USB port.


EEPROM content: [[File:EEPROM_Hantek_PSO2020_1204-24611_201712182026.zip]]
=== EEPROM layout ===
 
The device has a 256-byte I²C EEPROM with the following layout:
 
<span style="background-color: orange">c0</span> <span style="background-color: lime">b4 04</span> <span style="background-color: green">23 60</span> <span style="background-color: lightgreen">00 00</span> <span style="background-color: brown">00</span> <span style="background-color: yellow">91 91 91 91 8a 8a 85 85</span>
<span style="background-color: yellow">81 81 91 91 8a 8a 85 81 81 81 81 81 91 91 91 91</span>
<span style="background-color: yellow">8a 8a 85 85 81 81 91 91 8a 8a 85 81 81 81 81 81</span>
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
Description:
 
{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
!Bytes
!Description
|-
| style="background-color: orange" | 0
| '''0xc0''': FX2 "c0 load" mode, i.e. VID/PID/DID are loaded from EEPROM (but not firmware).
|-
| style="background-color: lime" | 1-2
| '''0x04b4''': USB vendor ID (VID).
|-
| style="background-color: green" | 3-4
| '''0x6023''': USB product ID (PID).
|-
| style="background-color: lightgreen" | 5-6
| '''0x0000''': USB device ID (DID).
|-
| style="background-color: brown" | 7
| '''0x00''': FX2 configuration byte (see FX2 TRM for details).
|-
| style="background-color: yellow" | 8-47
| Unknown. Possibly calibration data?
|-
| 48-255
| All-0xff.
|}


== Resources ==
== Resources ==

Latest revision as of 21:41, 22 January 2024

Hantek PSO2020
Hantek PSO2020 0.JPG
Status
Source code [1]
Channels 1
Samplerate 96MHz
Analog bandwidth 20MHz
Vertical resolution 8bit
Triggers none (SW-only)
Input impedance 1MΩ‖25pF
Memory none
Display none
Connectivity USB
Website hantek.com

The Hantek PSO2020 is a USB-based, 1-channel oscilloscope with an analog bandwidth of 20MS/s and 96MS/s sampling rate. Wide input rage, from ±100mV to ±50V.

See Hantek PSO2020/Info for more details (such as lsusb -v output) about the device.

Hardware


Microchip 24LC02BI pinout:

(Low, but not GND) A0 1-   O -8 VCC
(GND) A1 2- -7 WP (GND)
(GND) A2 3- -6 SCL (FX2 SCL)
VSS 4- -5 SDA (FX2 SDA)

Analog Devices ADS9288 pinout:

AD9288 pins Description
S1, S2 Tied to VCC. "Data Align Enabled (data from both channels available on rising edge of Clock A. Channel B data is delayed a 1/2 clock cycle).".
DFS Tied to GND. Data format select = "offset binary" (not "twos complement").
REF_IN_A, REF_IN_B Tied to REF_OUT.
AINA, AINB Analog input channels.

Cypress FX2 pinout:

FX2 pins Description
CTL0 Connected to AD9288 ENCA, to ENCB with an inverter. and to FX2 IFCLK.
PB0-PB7 Connected to AD9288 D7A-D0A. Bit reversed! Must be reversed back in software.
PD0-PD7 Connected to AD9288 D0B-D7B.
PA0, PA1, PA5 (Inputs) Connected to the 3 buttons
PC0, PC3, PE?, PE? (Inputs) Connected to the front selector
PC1 Connected to S1 of the 74HC4051D mux
PC2 Connected to S0 of the 74HC4051D mux
PC4 AC/DC Selector
PA7 Voltage Selection Relay
PA6 Green LED
PE1 Front light
PE2 Red LED

Photos

  • Box Front

  • Box Back

  • Device

  • Inside Front

  • Inside Back

  • Inside Detail

  • Analog input section

Protocol

Firmware

Note: The firmware is not flashed into the device permanently! It will be automatically "uploaded" to the Cypress FX2's SRAM every time you attach the device to a USB port.

EEPROM layout

The device has a 256-byte I²C EEPROM with the following layout: 

c0 b4 04 23 60 00 00 00 91 91 91 91 8a 8a 85 85
81 81 91 91 8a 8a 85 81 81 81 81 81 91 91 91 91
8a 8a 85 85 81 81 91 91 8a 8a 85 81 81 81 81 81
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Description:

Bytes Description
0 0xc0: FX2 "c0 load" mode, i.e. VID/PID/DID are loaded from EEPROM (but not firmware).
1-2 0x04b4: USB vendor ID (VID).
3-4 0x6023: USB product ID (PID).
5-6 0x0000: USB device ID (DID).
7 0x00: FX2 configuration byte (see FX2 TRM for details).
8-47 Unknown. Possibly calibration data?
48-255 All-0xff.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Hantek_PSO2020&oldid=16672"