Difference between revisions of "Arduino"
Jump to navigation
Jump to search
m |
|||
| Line 24: | Line 24: | ||
* '''16MHz crystal''': 16.000 | * '''16MHz crystal''': 16.000 | ||
Note that some older arduino designs and arduino clones feature FTDI usb-serial chip, which might be used as logic analyzer as well: [FTDI-LA] | Note that some older arduino designs and arduino clones feature FTDI usb-serial chip, which might be used as logic analyzer as well: [[FTDI-LA]] | ||
== Photos == | == Photos == | ||
Revision as of 13:20, 30 June 2019
 | |
| Status | in progress |
|---|---|
| Source code | ols |
| Channels | 6 |
| Samplerate | 4MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.5V — 5.5V |
| Threshold voltage | Fixed: VIH=3.0V—5V, VIL=0V—1.5V |
| Memory | ATmega168: 532 (or lower), ATmega328: 1024 (or lower), ATmega2560: 7168 (or lower) |
| Compression | RLE |
| Website | github.com |
SUMP protocol implementation for Arduino.
Hardware
- Main chip: Atmel ATmega168/328/2560
- Input pins: With optional internal pullups (currently has to be modified at compile-time)
- 3.3V and 5V output: 3.3V, 5V
- 16MHz crystal: 16.000
Note that some older arduino designs and arduino clones feature FTDI usb-serial chip, which might be used as logic analyzer as well: FTDI-LA
Photos
Arduino UNO board (ATmega328)
Arduino Nano board (ATmega328)
Protocol
- This uses the extended SUMP protocol as implemented by sigrok in ols driver.