Difference between revisions of "VKTECH saleae clone"
Jump to navigation
Jump to search
Line 42: | Line 42: | ||
== Links == | == Links == | ||
[http://www.neko.ne.jp/~freewing/hardware/usb_logic_analyzer_cy7c68013a_clone] | [http://www.neko.ne.jp/~freewing/hardware/usb_logic_analyzer_cy7c68013a_clone neko.ne.jp/~freewing] | ||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Logic analyzer]] | [[Category:Logic analyzer]] | ||
[[Category:Supported]] | [[Category:Supported]] |
Revision as of 16:37, 30 January 2018
Status | supported |
---|---|
Source code | fx2lafw |
Channels | 8 |
Samplerate | 24MHz |
Samplerate (state) | — |
Triggers | none (SW-only) |
Min/max voltage | max. 5.25V |
Threshold voltage | Fixed: VIH=1.4V, VIL=0.8V |
Memory | none |
Compression | none |
Website | [1] |
The VKTEK is a fairly standard Cypress FX2 based 8 channel 24 MHz logic analyzer, it is most similar to the ARMFLY_Mini-Logic and MCU123_USBee_AX_Pro_clone devices, though has differences from both of them (SMD LEDs, QFN package unlike MCU123, transceiver IC unlike ARMFLY).
sigrok uses the open-source fx2lafw firmware for this logic analyzer.
The device uses USB\VID_0925&PID_3881 so is indistinguishable from a Saleae_Logic device
Mine was purchased from AliExpress and arrived in 6 days.
Hardware
- Main chip: Cypress CY7C68013A-56LTXC (FX2LP in QFN package)
- Transceiver NXP LVC245A
- 3.3V voltage regulator: 6206A 1711/33
- I²C EEPROM: ATMHK218 24C02N
- Crystal: 24MHz