Difference between revisions of "VKTECH saleae clone"
Jump to navigation
Jump to search
| Line 39: | Line 39: | ||
File:VKTECH_connected.jpg|<small>Device, Connected</small> | File:VKTECH_connected.jpg|<small>Device, Connected</small> | ||
</gallery> | </gallery> | ||
== Links == | |||
[http://www.neko.ne.jp/~freewing/hardware/usb_logic_analyzer_cy7c68013a_clone] | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Logic analyzer]] | [[Category:Logic analyzer]] | ||
[[Category:Supported]] | [[Category:Supported]] | ||
Revision as of 16:36, 30 January 2018
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | max. 5.25V |
| Threshold voltage | Fixed: VIH=1.4V, VIL=0.8V |
| Memory | none |
| Compression | none |
| Website | [1] |
The VKTEK is a fairly standard Cypress FX2 based 8 channel 24 MHz logic analyzer, it is most similar to the ARMFLY_Mini-Logic and MCU123_USBee_AX_Pro_clone devices, though has differences from both of them (SMD LEDs, QFN package unlike MCU123, transceiver IC unlike ARMFLY).
sigrok uses the open-source fx2lafw firmware for this logic analyzer.
The device uses USB\VID_0925&PID_3881 so is indistinguishable from a Saleae_Logic device
Mine was purchased from AliExpress and arrived in 6 days.
Hardware
- Main chip: Cypress CY7C68013A-56LTXC (FX2LP in QFN package)
- Transceiver NXP LVC245A
- 3.3V voltage regulator: 6206A 1711/33
- I²C EEPROM: ATMHK218 24C02N
- Crystal: 24MHz
Photos
Device, case
Device, PCB front
Device, PCB rear
Device, Connected
