Difference between revisions of "VKTECH saleae clone"
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | |||
| image = [[File:VKTECH-clone.png|180px]] | |||
| name = VKTECH | |||
| status = supported | |||
| source_code_dir = fx2lafw | |||
| channels = 8 | |||
| samplerate = 24MHz | |||
| samplerate_state = — | |||
| triggers = none (SW-only) | |||
| voltages = max. 5.5V | |||
| threshold = Fixed: VIH=1.4V, VIL=0.8V | |||
| memory = none | |||
| compression = none | |||
| website = [http://xxxx] | |||
}} | |||
This | |||
****** IN PROGRESS ****** | |||
This is a fairly standard FX2 based 8 channel 24 MHz logic analyzer, purchased from AliExpress, arrived in 6 days | |||
https://aliexpress.com/item/24MHz-8-Channel-Logic-Analyzer/32814170174.html | https://aliexpress.com/item/24MHz-8-Channel-Logic-Analyzer/32814170174.html | ||
The '''VKTECH clone''' is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate. | |||
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | |||
See [[CWAV USBee SX/Info]] for some more details (such as '''lsusb -vvv''' output) on the device. | |||
CWAV, Inc. [http://usbee.com/company.htm has been closed and no longer sells] the USBee test pods (has chosen to go out of business effective September 10, 2015). But there are a lot of clones, like [[MCU123 USBee AX Pro clone]]. Just search for '''24mhz 8ch logic analyzer''' on http://ebay.com/ or http://aliexpress.com/ for one (usually under $10). | |||
== Hardware == | |||
* '''Main chip''': Cypress CY7C68013A-56PVXC (FX2LP) | |||
** '''Note:''' Older versions used the Cypress CY7C68013-56PVC (FX2), which is different in some ways (e.g. less SRAM) | |||
* '''3.3V voltage regulator''': ST LD33 | |||
* '''I2C EEPROM''': Microchip 24LC01B | |||
* '''Crystal''': 24MHz | |||
== Photos == | |||
'''New version with Cypress CY7C68013A (FX2LP):''' | |||
<gallery> | |||
File:Cwav usbee sx.jpg|<small>Device, front</small> | |||
File:Usbee sx case back.jpg|<small>Device, back</small> | |||
File:Usbee sx case open.jpg|<small>Device, open</small> | |||
File:Usbee sx pcb front.jpg|<small>PCB, front</small> | |||
File:Usbee sx pcb back.jpg|<small>PCB, back</small> | |||
</gallery> | |||
'''Old version with Cypress CY7C68013 (FX2):''' | |||
<gallery> | |||
File:Cwav_usbee_sx_device_top.jpg|<small>Device, front</small> | |||
File:Cwav_usbee_sx_device_bottom.jpg|<small>Device, back</small> | |||
File:Cwav_usbee_sx_pcb_top.jpg|<small>PCB, front</small> | |||
File:Cwav_usbee_sx_pcb_bottom.jpg|<small>PCB, back</small> | |||
File:Cwav_usbee_sx_revision_zx.jpg|<small>"USBee ZX" marking</small> | |||
</gallery> | |||
== Protocol == | |||
Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol. | |||
However, for those interested in this, someone else has already [https://blog.visucore.com/tags/usbee decoded most of it]. | |||
== Resources == | |||
* [http://usbee.com/software/ZXHelpFiles.zip USBee SX help files] | |||
* [http://usbee.com/usbeesuitemanual.pdf USBee Suite manual] | |||
* [http://usbee.com/usbeesuitesw.zip Vendor software] | |||
* [https://blog.visucore.com/2010/5/23/jtag-using-cypress-fx2-usb Visucore Blog: JTAG using USBee SX] | |||
* [https://blog.visucore.com/2010/5/28/pwm-on-the-usbee-hardware-using-custom-firmware Visucore Blog: PWM on the USBee with custom firmware] | |||
[[Category:Device]] | |||
[[Category:Logic analyzer]] | |||
[[Category:Supported]] | |||
Revision as of 14:52, 24 January 2018
| File:VKTECH-clone.png | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | max. 5.5V |
| Threshold voltage | Fixed: VIH=1.4V, VIL=0.8V |
| Memory | none |
| Compression | none |
| Website | [1] |
- IN PROGRESS ******
This is a fairly standard FX2 based 8 channel 24 MHz logic analyzer, purchased from AliExpress, arrived in 6 days
https://aliexpress.com/item/24MHz-8-Channel-Logic-Analyzer/32814170174.html
The VKTECH clone is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See CWAV USBee SX/Info for some more details (such as lsusb -vvv output) on the device.
CWAV, Inc. has been closed and no longer sells the USBee test pods (has chosen to go out of business effective September 10, 2015). But there are a lot of clones, like MCU123 USBee AX Pro clone. Just search for 24mhz 8ch logic analyzer on http://ebay.com/ or http://aliexpress.com/ for one (usually under $10).
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2LP)
- Note: Older versions used the Cypress CY7C68013-56PVC (FX2), which is different in some ways (e.g. less SRAM)
- 3.3V voltage regulator: ST LD33
- I2C EEPROM: Microchip 24LC01B
- Crystal: 24MHz
Photos
New version with Cypress CY7C68013A (FX2LP):
Device, front
Device, back
Device, open
PCB, front
PCB, back
Old version with Cypress CY7C68013 (FX2):
Device, front
Device, back
PCB, front
PCB, back
"USBee ZX" marking
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
However, for those interested in this, someone else has already decoded most of it.