Difference between revisions of "Protocol decoder:Graycode"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
== Parameters == | == Parameters == | ||
'''edges''': Rotary encoders are usually labeled as having N ''pulses'' per turn. A pulse consists of rising and falling edge and you have two lines that are phase-shifted by 90° to one another. This allows to extract ''4N edges'' per turn. | '''edges''': Number of ''rising and falling'' edges per turn of ''all'' lines. Rotary encoders are usually labeled as having N ''pulses'' per turn. A pulse consists of rising and falling edge and you have two lines that are phase-shifted by 90° to one another. This allows to extract ''4N edges'' per turn. | ||
'''numchannels''': due to a current bug in Pulseview, assigned optional probes aren't reported correctly, so you'll have to select the number of channels manually. | '''numchannels''': due to a current bug in Pulseview, assigned optional probes aren't reported correctly, so you'll have to select the number of channels manually. | ||
Revision as of 19:04, 18 September 2017
 | |
| Name | graycode |
|---|---|
| Description | Gray Code and Rotary Encoder |
| Status | ?? |
| License | GPLv2+ |
| Source code | decoders/?? |
| Input | logic |
| Output | graycode |
| Probes | — |
| Optional probes | D0-D7 |
| Options | numchannels, edges, avg_period |
The graycode protocol decoder can decode Gray Codes up to 8 data lines (but easily generalizes). One popular special case is the Rotary Encoder, which has two lines, A and B. The decoder will report phase, counting direction, absolute count, as well as timing information. Sorry for that mislabeling.
Parameters
edges: Number of rising and falling edges per turn of all lines. Rotary encoders are usually labeled as having N pulses per turn. A pulse consists of rising and falling edge and you have two lines that are phase-shifted by 90° to one another. This allows to extract 4N edges per turn.
numchannels: due to a current bug in Pulseview, assigned optional probes aren't reported correctly, so you'll have to select the number of channels manually.