Difference between revisions of "HP 6632B"

From sigrok
Jump to navigation Jump to search
(Created page with "{{Infobox power supply | image = 180px | name = HP 6632B | status = supported | source_code_dir = scp...")
 
 
Line 22: Line 22:
File:HP-6632B-Front.jpg|<small>6632B front</small>
File:HP-6632B-Front.jpg|<small>6632B front</small>
File:HP-6632B-Back.jpg|<small>6632B back</small>
File:HP-6632B-Back.jpg|<small>6632B back</small>
File:HP-6632B_01_front.jpeg|<small>6632B front with binding post option</small>
File:HP-6632B_02_back.jpeg|<small>6632B back with binding post option</small>
File:HP-6632B_03_open.jpeg|<small>6632B open</small>
File:HP-6632B_04_digital_board.jpeg|<small>6632B digital board</small>
File:HP-6632B_05_analog_board.jpeg|<small>6632B analog board</small>
File:HP-6632B_06_analog_board_details_1.jpeg|<small>6632B analog board details</small>
File:HP-6632B_07_analog_board_details_2.jpeg|<small>6632B analog board details</small>
File:HP-6632B_08_analog_board_details_3.jpeg|<small>6632B analog board details</small>
File:HP-6632B_09_analog_board_details_4.jpeg|<small>6632B analog board details</small>
File:HP-6632B_10_analog_board_details_5.jpeg|<small>6632B analog board details</small>
File:HP-6632B_11_analog_board_details_6.jpeg|<small>6632B analog board details</small>
File:HP-6632B_12_transformer.jpeg|<small>6632B transformer</small>
File:HP-6632B_13_front-panel_pcb_back.jpeg|<small>6632B front panel pcb</small>
File:HP-6632B_14_front-panel_pcb_front.jpeg|<small>6632B front panel pcb</small>
File:HP-6632B_15_front-binding_post_option.jpeg|<small>6632B binding post option</small>
</gallery>
</gallery>



Latest revision as of 23:13, 19 September 2015

HP 6632B
HP-6632B-Front.jpg
Status supported
Source code scpi-pps
Channels 1
Voltage/current (CH1) 0-20V / 0-5A
Connectivity GPIB, RS232
Website keysight.com

The HP 6632B is a single channel 100W DC programmable power supply with GPIB and RS232 connectivity. It is part of the HP 663x series. The same device appears with HP, Agilent and now Keysight branding, following the history of subdivision of the company.

The device uses the same SCPI command set over both the RS232 and GPIB ports. The interface and communications settings to use must be selected from the front panel before remote use.

All connections are on the back panel, unless an optional set of front panel binding posts are fitted. The unit is designed to be rack mountable.

Photos

Resources

User's Guide

Programming Guide

Service Manual