View source for PeakTech 3330/Info

== lsusb ==

<small>
 $ '''lsusb -v -d 10c4:ea60'''
 Bus 003 Device 035: ID '''10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light'''
 Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0 
   bDeviceProtocol         0 
   bMaxPacketSize0        64
   idVendor           0x10c4 '''Cygnal Integrated Products, Inc.'''
   idProduct          0xea60 '''CP210x UART Bridge / myAVR mySmartUSB light'''
   bcdDevice            1.00
   iManufacturer           1 '''Silicon Labs'''
   iProduct                2 '''CP2102 USB to UART Bridge Controller'''
   iSerial                 3 '''0001'''
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           32
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0 
     bmAttributes         0x80
       (Bus Powered)
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           2
       bInterfaceClass       255 Vendor Specific Class
       bInterfaceSubClass      0 
       bInterfaceProtocol      0 
       iInterface              2 '''CP2102 USB to UART Bridge Controller'''
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0040  1x 64 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x01  EP 1 OUT
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0040  1x 64 bytes
         bInterval               0
 Device Status:     0x0000
   (Bus Powered)
</small>