View source for Incite Technology USB-DUXfast

[[File:Usbduxfast.png|thumb|right|Incite Technology USB-DUXfast]]

The [http://www.linux-usb-daq.co.uk/tech2_duxfast/ Incite Technology USB-DUXfast] is an USB-based analog data acquisition device. It supports up to 16 channels at 3 MHz '''continuous realtime capture'''. It does not include any preamplifier, and has input levels of +-0.5V or +-0.75V.

The device is supported by the open-source [http://www.comedi.org/ comedi] driver.

See [[Incite Technology USB-DUXfast/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

== Hardware ==

* ST DALC12 input ESD protection
* ADG706B analog multiplexer
* ADS807E analog-to-digital converter
* CY7C68013A-56PVXC (FX2LP) USB interface
* ST 24C02WP EEPROM

== Photos==

<gallery>
File:USB-DUXfast PCB.jpg|<small>PCB component side</small>
File:USB-DUXfast input connector.jpg|<small>Analog inputs connector</small>
File:USB-DUXfast usb connector.jpg|<small>USB port and mostly unused 15-pin connector</small>
</gallery>

== Protocol ==

Should be documented and/or extractable from the [http://www.comedi.org/ comedi] source code.

== Resources ==

* [http://www.linux-usb-daq.co.uk/dev2/duxfast_diagram.pdf Schematics]
* [http://www.linux-usb-daq.co.uk/dev2/duxfast_pinout.pdf Pinout]
* [http://www.linux-usb-daq.co.uk/software2/ Vendor software] (various open-source options)

== Available for testing ==

[[User:Jpa]] has this device and no current use for it. It can be borrowed if someone is interested in developing driver for it and/or adding comedi interface to sigrok.

[[Category:Device]]
[[Category:Planned]]