View source for Hameg HMO compact series

{{Infobox oscilloscope
| image               = [[File:Hameg HMO2024.png|180px]]
| name                = Hameg HMO compact series
| status              = supported
| source_code_dir     = hameg-hmo
| channels            = 2-4 analog, 8 digital
| samplerate          = 2GSa/s (interleaved), 1GSA/s (non interleaved)
| bandwidth           = 70-200MHz (depending on model)
| vertical_resolution = 8bits (HiRes up to 10bits)
| triggers            = pulse width, slope, video, pattern, serial bus (optional)
| input_impedance     = 1MΩ‖14pF 200Vp CAT I, 50Ω 5V RMS (model dependent)
| memory              = 2Mpts (mode/ch-dependent)
| display             = 6.5" VGA (640x480), 256 colors
| connectivity        = USB host/device, RS232, ethernet (optional), GPIB (optional)
| features            = math: + / &mdash; / x / FFT, statistics, vertical sensitivity: 1mV/div - 10V/div
| website             = [http://www.hameg.com/0.616.0.html hameg.com]
}}

The '''The Hameg HMO compact series''' are 70-200MHz, 2GSa/s, 2-4 analog channel and 8 digital channel digital storage oscilloscopes.

All models support different extension modules which provide different connectivity.

Most models come with a [[Hameg HO720|HO720]] (RS232, USB) module, other modules like the [[Hameg HO730|HO730]] (USB, ethernet) and the [[Hameg HO740|HO740]] (GPIB) are available optionally.

All models come with analog probes (specific probe might depend on the scope's capabilities).

Digital probes are optional extra, see [[Hameg HO3508|HO3508]].

== Devices ==

{| class="wikitable"
!Model || Bandwidth || Analog Channels || Digital Channels
|-
|| HMO722 || 70MHz || 2 || 8
|-
|| HMO1022 || 100MHz || 2 || 8
|-
|| HMO1522 || 150MHz || 2 || 8
|-
|| HMO2022 || 200MHz || 2 || 8
|-
|| HMO724 || 70MHz || 4 || 8
|-
|| HMO1024 || 100MHz || 4 || 8
|-
|| [[Hameg HMO1524 | HMO1524]] || 150MHz || 4 || 8
|-
|| [[Hameg HMO2024 | HMO2024]] || 200MHz || 4 || 8
|-
|| [[Hameg HMO2524 | HMO2524]] || 250MHz || 4 || 16
|}

Note that it's uncertain whether HMO2524 strictly belongs to the "HMO compact" series, as it has features that are unique to the HMO3000 series, and comes in a different case. Nevertheless, the [[Hameg HMO2524|HMO2524]] is supported by libsigrok's '''hameg-hmo''' driver.

== Protocol ==

All the devices use same [[IEEE-488|SCPI]] protocol.

The serial parameters are configurable on the device, the standard settings are: 8n2, no handshake, 115200 baud.

Some models optionally support USBTMC.

== Resources ==

* [http://www.hameg.com/manuals.0.html?no_cache=1 Hameg - resource page]
* [http://midas.herts.ac.uk/helpsheets/hameg_scpi_hmo72.pdf Hameg HMO - programming guide]
* [https://cdn.rohde-schwarz.com/pws/dl_downloads/dl_common_library/dl_manuals/gb_1/h/hmo72x_202x/HMO72x_202x_SCPI_ProgrammersManual_en_02.pdf R&S HMO Compact Series Digital Oscilloscope - SCPI Programmer's Manual] (Version 02 as of 2015, 196 pages, refers to "72x_202x")
* [http://www.soselectronic.cz/a_info/resource/l/hameg/HAMEG_Addendum_HMO_EN%5B1%5D.pdf Hameg HMO compact series - datasheet]

[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Supported]]