]>
Commit | Line | Data |
---|---|---|
1 | #!/bin/sh | |
2 | ## | |
3 | ## This file is part of the sigrok-util project. | |
4 | ## | |
5 | ## Copyright (C) 2016 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | ## | |
7 | ## This program is free software; you can redistribute it and/or modify | |
8 | ## it under the terms of the GNU General Public License as published by | |
9 | ## the Free Software Foundation; either version 2 of the License, or | |
10 | ## (at your option) any later version. | |
11 | ## | |
12 | ## This program is distributed in the hope that it will be useful, | |
13 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | ## GNU General Public License for more details. | |
16 | ## | |
17 | ## You should have received a copy of the GNU General Public License | |
18 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. | |
19 | ## | |
20 | ||
21 | set -e | |
22 | ||
23 | # Build target: "i686" (32bit) or "x86_64" (64bit). | |
24 | TARGET="i686" | |
25 | ||
26 | # The path where the compiled packages will be installed. | |
27 | PREFIX=$HOME/sr_msys2 | |
28 | ||
29 | # The path where to download files to and where to build packages. | |
30 | BUILDDIR=./build | |
31 | ||
32 | # The path where the libsigrok Python bindings will be installed. | |
33 | PYPATH=$PREFIX/lib/python2.7/site-packages | |
34 | ||
35 | # Edit this to control verbose build output. | |
36 | # V="V=1 VERBOSE=1" | |
37 | ||
38 | # Edit this to enable/disable/modify parallel compiles. | |
39 | PARALLEL="-j 2" | |
40 | ||
41 | # You usually don't need to change anything below this line. | |
42 | ||
43 | # ----------------------------------------------------------------------------- | |
44 | ||
45 | VER_SIGROK_FIRMWARE_FX2LAFW=0.1.3 | |
46 | ||
47 | # ----------------------------------------------------------------------------- | |
48 | ||
49 | P="$PREFIX/lib/pkgconfig" | |
50 | C="$C --prefix=$PREFIX" | |
51 | L="--disable-shared --enable-static" | |
52 | ||
53 | # Path to Qt binaries (needed for cmake to find the Qt libs). | |
54 | PATH="/mingw32/qt5-static/bin:$PATH" | |
55 | ||
56 | W="mingw-w64-$TARGET" | |
57 | ||
58 | WGET="wget -c --quiet" | |
59 | GIT_CLONE="git clone --depth=1" | |
60 | ||
61 | REPO_BASE="git://sigrok.org" | |
62 | ||
63 | # Remove build directory contents (if any) and create a new build dir. | |
64 | rm -rf $BUILDDIR | |
65 | mkdir $BUILDDIR | |
66 | cd $BUILDDIR | |
67 | ||
68 | # ----------------------------------------------------------------------------- | |
69 | ||
70 | if [ "x$1" = "xprepare" ]; then | |
71 | # Update package list, install/update all requirements. | |
72 | pacman -Sy | |
73 | pacman -S \ | |
74 | autoconf automake libtool make pkg-config wget patch \ | |
75 | $W-toolchain $W-glib2 $W-glibmm $W-libusb $W-check $W-boost \ | |
76 | $W-libzip $W-doxygen $W-python3 $W-python3-numpy $W-python3-gobject \ | |
77 | $W-python3-setuptools $W-swig $W-qt5-static $W-cmake | |
78 | exit | |
79 | fi | |
80 | ||
81 | # ----------------------------------------------------------------------------- | |
82 | ||
83 | # libusb | |
84 | $GIT_CLONE git://github.com/dickens/libusb -b event-abstraction-v4 | |
85 | cd libusb | |
86 | ./bootstrap.sh | |
87 | ./configure $C $L | |
88 | make -j1 $V | |
89 | make install $V | |
90 | cd .. | |
91 | ||
92 | # libserialport | |
93 | $GIT_CLONE $REPO_BASE/libserialport | |
94 | cd libserialport | |
95 | ./autogen.sh | |
96 | mkdir build | |
97 | cd build | |
98 | ../configure $C $L | |
99 | $SB make $PARALLEL $V | |
100 | make install $V | |
101 | cd ../.. | |
102 | ||
103 | # libsigrok | |
104 | mkdir -p $PYPATH | |
105 | $GIT_CLONE $REPO_BASE/libsigrok | |
106 | cd libsigrok | |
107 | ./autogen.sh | |
108 | mkdir build | |
109 | cd build | |
110 | PKG_CONFIG_PATH=$P ../configure $C $L --disable-python | |
111 | $SB make $PARALLEL $V | |
112 | PYTHONPATH=$PYPATH $SB make install $V | |
113 | # $SB make check $V # TODO | |
114 | cd ../.. | |
115 | ||
116 | # libsigrokdecode | |
117 | $GIT_CLONE $REPO_BASE/libsigrokdecode | |
118 | cd libsigrokdecode | |
119 | ./autogen.sh | |
120 | mkdir build | |
121 | cd build | |
122 | PKG_CONFIG_PATH=$P ../configure $C $L | |
123 | $SB make $PARALLEL $V | |
124 | make install $V | |
125 | # $SB make check $V # TODO | |
126 | cd ../.. | |
127 | ||
128 | # sigrok-firmware | |
129 | $GIT_CLONE $REPO_BASE/sigrok-firmware | |
130 | cd sigrok-firmware | |
131 | ./autogen.sh | |
132 | mkdir build | |
133 | cd build | |
134 | # Nothing gets cross-compiled here, we just need 'make install' basically. | |
135 | ../configure $C | |
136 | make install $V | |
137 | cd ../.. | |
138 | ||
139 | # sigrok-firmware-fx2lafw | |
140 | $WGET http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz | |
141 | tar xfz sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz | |
142 | cd sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW | |
143 | cp *.fw $PREFIX/share/sigrok-firmware/ | |
144 | cd .. | |
145 | ||
146 | # TODO: Doesn't build, libsigrokdecode linking errors. | |
147 | # # sigrok-cli | |
148 | # $GIT_CLONE $REPO_BASE/sigrok-cli | |
149 | # cd sigrok-cli | |
150 | # ./autogen.sh | |
151 | # mkdir build | |
152 | # cd build | |
153 | # PKG_CONFIG_PATH=$P ../configure $C $L | |
154 | # $SB make $PARALLEL $V | |
155 | # make install $V | |
156 | # # makensis -DHOME=$HOME contrib/sigrok-cli_cross.nsi # TODO | |
157 | # cd ../.. | |
158 | ||
159 | # TODO: Doesn't build, various linking errors. | |
160 | # PulseView | |
161 | $GIT_CLONE $REPO_BASE/pulseview | |
162 | cd pulseview | |
163 | mkdir build | |
164 | cd build | |
165 | PKG_CONFIG_PATH=$P $SB cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=n .. | |
166 | $SB make $PARALLEL $V | |
167 | make install $V | |
168 | # $SB make test $V # TODO | |
169 | # makensis -DHOME=$HOME contrib/pulseview_cross.nsi # TODO | |
170 | cd ../.. | |
171 |