sigrok-cross-android: Fix brokenness in mbstowcs/wcstombs in Python patch

[sigrok-util.git] / cross-compile / android / sigrok-cross-android

#!/bin/bash
##
## This file is part of the sigrok-util project.
##
## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

set -e

# The path where Android NDK is located.
ANDROID_NDK=/usr/local/android-ndk-r9d

# The path where Android SDK is located.
ANDROID_SDK=/usr/local/android

# The path where your Android toolchain directory is located.
TOOLCHAIN=$HOME/android/android-arm-toolchain
# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
# TOOLCHAIN=$HOME/android/android-i686-toolchain

# Select which Android toolchain to use.
# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
TOOLCHAIN_TRIPLET=arm-linux-androideabi
# TOOLCHAIN_TRIPLET=mipsel-linux-android
# TOOLCHAIN_TRIPLET=i686-linux-android

# The path where the cross-compiled packages will be installed.
PREFIX=$HOME/sr_android

# The path where to download files to and where to build packages.
BUILDDIR=./build

# Edit this to enable/disable/modify parallel compiles.
PARALLEL="-j 2"

# You usually don't need to change anything below this line.

# -----------------------------------------------------------------------------

VER_LIBICONV=1.14
VER_GETTEXT=0.18.3
VER_ZLIB=1.2.8
VER_PCRE=8.33
VER_LIBFFI=3.0.13
VER_GLIB=2.38.2
VER_GLIB_SHORT=2.38
VER_LIBZIP=0.11.1
VER_LIBFTDI1=1.1
VER_LIBUSBX=1.0.17
VER_PYTHON=3.3.3
VER_BOOST=1.55.0
VER_QT=n0.31

SF_MIRROR=switch.dl.sourceforge.net

WGET="wget --quiet"
GIT_CLONE="git clone --depth=1"

case "$TOOLCHAIN_TRIPLET" in
  arm*) TARGET_ARCH=armeabi;;
  mips*) TARGET_ARCH=mips;;
  i686*) TARGET_ARCH=x86;;
  *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET"; exit 1;;
esac

# -----------------------------------------------------------------------------

# Remove build directory contents (if any) and create a new build dir.
rm -rf $BUILDDIR
mkdir $BUILDDIR
cd $BUILDDIR

# Build host Python before we start messing with the environment.
$WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
tar xJf Python-$VER_PYTHON.tar.xz
cd Python-$VER_PYTHON
./configure
make python $PARALLEL
make Parser/pgen $PARALLEL
mv python hostpython
mv Parser/pgen Parser/hostpgen
cd ..

# -----------------------------------------------------------------------------

# We need to find tools in the toolchain.
export PATH=$TOOLCHAIN/bin:$PATH

# Tell pkg-config to only look for our cross-built stuff.
export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
export -n PKG_CONFIG_PATH

# Define some helper variables.
C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX} -DANDROID_STANDALONE_TOOLCHAIN=${TOOLCHAIN}"

# Get the latest versions of config.guess/config.sub that know about Android.
$GIT_CLONE git://git.savannah.gnu.org/config.git

# Get a toolchain for cmake that knows about Android
wget https://android-cmake.googlecode.com/hg/toolchain/android.toolchain.cmake
patch < ../android.toolchain.cmake.patch android.toolchain.cmake

# -----------------------------------------------------------------------------

# Python (needed for libsigrokdecode)
cd Python-$VER_PYTHON
make distclean
autoreconf
patch -p1 < ../../Python-$VER_PYTHON.patch
ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install $PARALLEL
cd ..

# libiconv (needed for glib)
$WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
tar xfz libiconv-$VER_LIBICONV.tar.gz
cd libiconv-$VER_LIBICONV
cp -f ../config/config.guess build-aux
cp -f ../config/config.sub build-aux
cp -f ../config/config.guess libcharset/build-aux
cp -f ../config/config.sub libcharset/build-aux
./configure $C --enable-shared
make lib/localcharset.h
cd libcharset
make $PARALLEL
make install
cd ../lib
make $PARALLEL
make install
cd ..
test -d $PREFIX/include || mkdir $PREFIX/include
cp include/iconv.h.inst $PREFIX/include/iconv.h
cd ..

# gettext (needed for glib)
$WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
tar xfz gettext-$VER_GETTEXT.tar.gz
cd gettext-$VER_GETTEXT
./configure $C --enable-shared --disable-libasprintf
cd gettext-runtime
make $PARALLEL
make install
cd ../..

# zlib (needed for glib and libzip)
$WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
tar xfvz zlib-$VER_ZLIB.tar.gz
cd zlib-$VER_ZLIB
# Note: zlib's configure doesn't understand --host, we need to pass $CC.
CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
make $PARALLEL
make install
cd ..

# pcre (needed for glib)
$WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
tar xfvz pcre-$VER_PCRE.tar.gz
cd pcre-$VER_PCRE
./configure $C --disable-cpp
make $PARALLEL
make install
cd ..

# libffi (needed for glib)
$WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
tar xfz libffi-$VER_LIBFFI.tar.gz
cd libffi-$VER_LIBFFI
./configure $C
make $PARALLEL
make install
cd ..

# glib
$WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
tar xJf glib-$VER_GLIB.tar.xz
cd glib-$VER_GLIB
./autogen.sh
# Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
make $PARALLEL
make install
cd ..

# libzip
$WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
tar xfz libzip-$VER_LIBZIP.tar.gz
cd libzip-$VER_LIBZIP
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
make $PARALLEL
make install
cd ..

# libusb-1.0
$WGET http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
tar xfj libusbx-$VER_LIBUSBX.tar.bz2
cd libusbx-$VER_LIBUSBX
patch -p1 < ../../libusb-1.0.patch
./configure $C --disable-udev
make $PARALLEL
make install
cd ..

# libftdi1
$WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
cd libftdi1-$VER_LIBFTDI1
cmake $CM .
make $PARALLEL
make install
cd ..

# libserialport
$GIT_CLONE git://sigrok.org/libserialport
cd libserialport
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..

# libsigrok
$GIT_CLONE git://sigrok.org/libsigrok
cd libsigrok
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..

# libsigrokdecode
$GIT_CLONE git://sigrok.org/libsigrokdecode
cd libsigrokdecode
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..

# sigrok-cli
$GIT_CLONE git://sigrok.org/sigrok-cli
cd sigrok-cli
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..


# Check if we have kit to build PulseView

if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then
  echo "Android NDK not available, not building PulseView"
  exit 0
fi

if [ -z "$ANDROID_SDK" -o ! -d "$ANDROID_SDK"/platforms/android-4 -o \
     ! -d "$ANDROID_SDK"/platforms/android-7 -o \
     ! -d "$ANDROID_SDK"/platforms/android-8 -o \
     ! -d "$ANDROID_SDK"/platforms/android-14 ]; then
  echo "Android SDK with platforms 4 7 8 14 not available, not building PulseView"
  exit 0
fi

ANDROID_TOOLS=${ANDROID_SDK}/tools
ANDROID_BUILD_TOOLS=${ANDROID_SDK}/build-tools/19.0.1

if [ ! -e "$ANDROID_TOOLS/android" -o ! -e "$ANDROID_BUILD_TOOLS/dx" ]; then
  echo "Essential Android build tools not available, not building PulseView"
  exit 0
fi

NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`


# boost (needed for PulseView)
$WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2
tar xfj boost_${VER_BOOST//./_}.tar.bz2
cd boost_${VER_BOOST//./_}
patch -p1 < ../../boost.patch
./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system,thread --without-icu
echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"-I$PREFIX/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH}/include\" <linkflags>\"-L$PREFIX/lib -L${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH} -lgnustl_shared\" ;" > user-config.jam
./b2 -q -d+2 --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install
cd ..

# qt (needed for PulseView)
$GIT_CLONE -b $VER_QT git://anongit.kde.org/android-qt.git
cd android-qt
patch -p1 < ../../android-qt.patch
ANDROID_SDK_PLATFORM_TOOLS_PATH=$ANDROID_BUILD_TOOLS ANDROID_SDK_TOOLS_PATH=$ANDROID_TOOLS ./android/androidconfigbuild.sh -n $ANDROID_NDK -a $TARGET_ARCH -l 14 -q 1 -d 1 -i $PREFIX -k 1 -o $NDK_HOST -v $NDK_TOOLCHAIN_VERSION
cd ..

# PulseView
$GIT_CLONE git://sigrok.org/pulseview
cd pulseview
patch -p1 < ../../pulseview-cpp.patch
cmake $CM -DQT_QMAKE_EXECUTABLE=${PREFIX}/bin/qmake -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl -DENABLE_DECODE=FALSE .
make $PARALLEL
cp -r "$PREFIX"/src/android/java .
cp -r libs java/
cd java
patch -p2 < ../../../pulseview-java.patch
mkdir -p assets
READELF=$TOOLCHAIN_TRIPLET-readelf ../../../fix-libraries.sh "$PREFIX/lib" libs/"$TARGET_ARCH" libpulseview.so > assets/liblist.txt
cp ${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH}/libgnustl_shared.so libs/${TARGET_ARCH}/
"$ANDROID_TOOLS/android" update project -p . -t android-14 -n PulseView
ant debug
cd ../..