sigrok-cross-*: Use 'git clone --depth=1'.

[sigrok-util.git] / cross-compile / android / sigrok-cross-android

#!/bin/bash
##
## This file is part of the sigrok-util project.
##
## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

set -e

# The path where your Android toolchain directory is located.
TOOLCHAIN=$HOME/android/android-arm-toolchain
# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
# TOOLCHAIN=$HOME/android/android-i686-toolchain

# Select which Android toolchain to use.
# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
TOOLCHAIN_TRIPLET=arm-linux-androideabi
# TOOLCHAIN_TRIPLET=mipsel-linux-android
# TOOLCHAIN_TRIPLET=i686-linux-android

# The path where the cross-compiled packages will be installed.
PREFIX=$HOME/sr_android

# The path where to download files to and where to build packages.
BUILDDIR=./build

# Edit this to enable/disable/modify parallel compiles.
PARALLEL="-j 2"

# You usually don't need to change anything below this line.

# -----------------------------------------------------------------------------

VER_LIBICONV=1.14
VER_GETTEXT=0.18.3
VER_ZLIB=1.2.8
VER_PCRE=8.33
VER_LIBFFI=3.0.13
VER_GLIB=2.38.2
VER_GLIB_SHORT=2.38
VER_LIBZIP=0.11.1
VER_LIBUSB=0.1.12
VER_LIBFTDI=0.20
VER_LIBUSBX=1.0.17
VER_PYTHON=3.3.3

SF_MIRROR=switch.dl.sourceforge.net

WGET="wget --quiet"
GIT_CLONE="git clone --depth=1"

# -----------------------------------------------------------------------------

# Remove build directory contents (if any) and create a new build dir.
rm -rf $BUILDDIR
mkdir $BUILDDIR
cd $BUILDDIR

# Build host Python before we start messing with the environment.
$WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
tar xJf Python-$VER_PYTHON.tar.xz
cd Python-$VER_PYTHON
./configure
make python $PARALLEL
make Parser/pgen $PARALLEL
mv python hostpython
mv Parser/pgen Parser/hostpgen
cd ..

# -----------------------------------------------------------------------------

# We need to find tools in the toolchain.
export PATH=$TOOLCHAIN/bin:$PATH

# Tell pkg-config to only look for our cross-built stuff.
export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
export -n PKG_CONFIG_PATH

# Define some helper variables.
C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"

# Get the latest versions of config.guess/config.sub that know about Android.
$GIT_CLONE git://git.savannah.gnu.org/config.git

# -----------------------------------------------------------------------------

# Python (needed for libsigrokdecode)
cd Python-$VER_PYTHON
make distclean
autoreconf
patch -p1 < ../../Python-$VER_PYTHON.patch
ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install $PARALLEL
cd ..

# libiconv (needed for glib)
$WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
tar xfz libiconv-$VER_LIBICONV.tar.gz
cd libiconv-$VER_LIBICONV
cp -f ../config/config.guess build-aux
cp -f ../config/config.sub build-aux
cp -f ../config/config.guess libcharset/build-aux
cp -f ../config/config.sub libcharset/build-aux
./configure $C --enable-shared
make lib/localcharset.h
cd libcharset
make $PARALLEL
make install
cd ../lib
make $PARALLEL
make install
cd ..
test -d $PREFIX/include || mkdir $PREFIX/include
cp include/iconv.h.inst $PREFIX/include/iconv.h
cd ..

# gettext (needed for glib)
$WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
tar xfz gettext-$VER_GETTEXT.tar.gz
cd gettext-$VER_GETTEXT
./configure $C --enable-shared --disable-libasprintf
cd gettext-runtime
make $PARALLEL
make install
cd ../..

# zlib (needed for glib and libzip)
$WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
tar xfvz zlib-$VER_ZLIB.tar.gz
cd zlib-$VER_ZLIB
# Note: zlib's configure doesn't understand --host, we need to pass $CC.
CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
make $PARALLEL
make install
cd ..

# pcre (needed for glib)
$WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
tar xfvz pcre-$VER_PCRE.tar.gz
cd pcre-$VER_PCRE
./configure $C --disable-cpp
make $PARALLEL
make install
cd ..

# libffi (needed for glib)
$WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
tar xfz libffi-$VER_LIBFFI.tar.gz
cd libffi-$VER_LIBFFI
./configure $C
make $PARALLEL
make install
cd ..

# glib
$WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
tar xJf glib-$VER_GLIB.tar.xz
cd glib-$VER_GLIB
./autogen.sh
# Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
make $PARALLEL
make install
cd ..

# libzip
$WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
tar xfz libzip-$VER_LIBZIP.tar.gz
cd libzip-$VER_LIBZIP
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
make $PARALLEL
make install
cd ..

# libusb-0.1 (not used directly, but needed for libftdi)
$WGET http://$SF_MIRROR/project/libusb/libusb-0.1%20%28LEGACY%29/$VER_LIBUSB/libusb-$VER_LIBUSB.tar.gz
tar xfz libusb-$VER_LIBUSB.tar.gz
cd libusb-$VER_LIBUSB
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
# Explicitly exclude libusbpp.la from lib_LTLIBRARIES, and skip subdirs.
make lib_LTLIBRARIES=libusb.la SUBDIRS=. $PARALLEL
make lib_LTLIBRARIES=libusb.la SUBDIRS=. install
cd ..

# libftdi
$WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi-$VER_LIBFTDI.tar.gz
tar xfz libftdi-$VER_LIBFTDI.tar.gz
cd libftdi-$VER_LIBFTDI
cp -f ../config/config.guess .
cp -f ../config/config.sub .
# libftdi needs to find libusb-config which is installed in $PREFIX/bin.
PATH=$PREFIX/bin:$PATH ./configure $C
make $PARALLEL
make install
cd ..

# libusb-1.0
$WGET http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
tar xfj libusbx-$VER_LIBUSBX.tar.bz2
cd libusbx-$VER_LIBUSBX
patch -p1 < ../../libusb-1.0.patch
./configure $C --disable-udev
make $PARALLEL
make install
cd ..

# libserialport
$GIT_CLONE git://sigrok.org/libserialport
cd libserialport
./autogen.sh
./configure $C --without-libudev
make $PARALLEL V=1
make install
cd ..

# libsigrok
$GIT_CLONE git://sigrok.org/libsigrok
cd libsigrok
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..

# libsigrokdecode
$GIT_CLONE git://sigrok.org/libsigrokdecode
cd libsigrokdecode
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..

# sigrok-cli
$GIT_CLONE git://sigrok.org/sigrok-cli
cd sigrok-cli
./autogen.sh
./configure $C
make $PARALLEL V=1
make install
cd ..