]>
Commit | Line | Data |
---|---|---|
55fd866a UH |
1 | 0.7.2 (2021-03-01) |
2 | ------------------ | |
3 | ||
4 | * Command line option changes: | |
5 | - Add the -D|--dont-scan option. | |
6 | - Add the --list-serial option. | |
7 | - Add the --list-supported-wiki option (internal, developer-only). | |
8 | - Accept multiple --config requests for multiple channel groups. | |
9 | - Accept multiple --get requests for multiple channel groups. | |
10 | * Protocol decoding: | |
11 | - Add support for Google Trace Event output (JSON). | |
12 | - Add support for float option data type (bug #1247). | |
13 | - Perform stricter checks for integer decoder options. | |
14 | - Accept annotation rows for -A specs. | |
15 | - Fix memory leaks in annotation setup error paths. | |
16 | - Add sanity check when mapping channels (bug #1515). | |
17 | * Manpage: | |
18 | - Fix -A description wrt default annotations shown. | |
19 | - Clarify annotation classes in -A description. | |
20 | - Improve/clarify documentation of the -d option. | |
21 | * --show: | |
22 | - Mark currently selected samplerate item in samplerates lists. | |
23 | - Support arrays of floats, unbreaks LCR output frequency listing. | |
24 | - Do print floating point results even if value is zero. | |
25 | - List protocol decoder tags (if available). | |
26 | - Synchronize --get output for MQ with --show output. | |
27 | - Add support for -i <file> --show, provide details on input stream. | |
28 | * --scan: Show device serial number if available. | |
29 | * Warn about unknown input/output module option keys (bug #1549). | |
30 | * Extend options parser, support optional ID in key-value lists. | |
31 | * Terminate with error when -B was specified but -P is missing (bug #1180). | |
32 | * Fix listing of some configuration options (bug #1331). | |
33 | * Print error message when output file creation fails (bug #1372). | |
34 | * Windows: | |
35 | - Set stdout to binary mode on Windows as needed (bug #1427). | |
36 | - nsis: Ship Python stdlib *.pyd files needed by some PDs (bug #1409). | |
37 | - nsis: Install 64bit Windows programs into 'Program Files' (bug #1082). | |
38 | ||
cee6849a UH |
39 | 0.7.1 (2018-10-26) |
40 | ------------------ | |
41 | ||
42 | * Command line option changes: | |
43 | - Add the --protocol-decoder-samplenum option. | |
44 | * Scan: Fix auto-select of non-demo device, if there's only one (bug #848). | |
45 | * Protocol decoding: Always print colon after protocol decoder ID. | |
46 | * input: | |
47 | - Increase chunk size to 4MB (large performance improvements). | |
48 | - Make read from stdin work with the presence of -I specs. | |
49 | * Manpage: | |
50 | - Fix outdated references to -V (it's -L now). | |
51 | - Don't list specific output formats, only mention -L. | |
52 | - Improve decoder stacking documentation. | |
53 | - Mention currently unsupported channel name auto-matching. | |
54 | - Various example invocation improvements (bug #1181). | |
55 | * Fix invalid frame limit error reporting. | |
56 | * Bugfix in order to make sr_session_stop() actually work. | |
57 | * Add a .desktop file and an icon. | |
58 | * Don't unnecessarily run the 'analog' output module on data sources | |
59 | which don't have analog channels, thus improving performance. | |
60 | * HACKING: Prefer git pull requests over mailing list patches. | |
61 | ||
f21b7618 UH |
62 | 0.7.0 (2017-06-12) |
63 | ------------------ | |
64 | ||
65 | * Update sigrok-cli to the new APIs from both libsigrok 0.5.0 and also | |
66 | libsigrokdecode 0.5.0. | |
67 | * -P <decoder> --show: | |
68 | - List the binary output classes of the decoder. | |
69 | - List the possible input and output IDs of the decoder. | |
70 | * --help: | |
71 | - Clarify that --show also lists input/output format options, | |
72 | as well as protocol decoder options (bug #851). | |
73 | - Show a few typical invocations of e.g. --samples/--time/--continuous. | |
74 | * Add an -L|--list-supported option; this used to be part of -V (bug #604). | |
75 | * Drop the superfluous -S|--protocol-decoder-stack option. Stacking can | |
76 | be done by simply using -P and providing the decoders in the correct order. | |
77 | * Allow multiple -P options to decode multiple stacks (bug #868). | |
78 | * Show decoder instance IDs so the user can tell instances apart (bug #868). | |
79 | * Show annotations based on decoder ID (not instance ID). | |
80 | - Behaviour preserved: | |
81 | Single PD, no -A flag => all annotations from PD | |
82 | Single PD, -A pdid => all annotations from PD | |
83 | Single PD, -A pdid=annX => annX from PD | |
84 | - Behaviour now added: | |
85 | Duplicate PDs, no -A flag => all annotations from all PDs | |
86 | Duplicate PDs, -A pdid => all annotations from all PDs of type pdid | |
87 | Duplicate PDs, -A pdid=annX => all annX from all PDs of type pdid | |
88 | * Fix various memory leaks. | |
89 | * ./configure summary: Show linker flags used. | |
90 | * NSIS: | |
91 | - Update to Python 3.4.x. We can't use any higher version for the time | |
92 | being, since 3.4.x is the last version to support Windows XP. | |
93 | - Place the example .sr files in a separate installer section. | |
94 | - Limit example .sr files to a small set to shrink the installer size. | |
95 | - Clarify Start menu links (e.g. "Uninstall") to avoid confusion. | |
96 | * HACKING: Update URL to Linux kernel coding style. | |
97 | * Fix some compiler warnings (clang). | |
98 | ||
7bdc46d6 UH |
99 | 0.6.0 (2016-01-29) |
100 | ------------------ | |
101 | ||
102 | * Update sigrok-cli to the new APIs from both libsigrok 0.4.0 and also | |
103 | libsigrokdecode 0.4.0. | |
104 | * Updated build requirements: | |
105 | - libglib >= 2.32.0 | |
106 | - libsigrok >= 0.4.0 | |
107 | - libsigrokdecode >= 0.4.0 | |
108 | * Fix various compiler errors/warnings. | |
109 | * Check srd_decoder_get_by_id() output to prevent a segfault (bug #370). | |
110 | * manpage: Document the -M and -B options. | |
111 | * Improve option parsing code and make it more robust. | |
112 | * Drop references to obsolete sigrok-commits mailing list. | |
113 | * Properly handle saving logic data packets of any size. | |
114 | * Add 'analog' output module to default output. | |
115 | * Fix various memory leaks. | |
116 | * Show PD annotation row members by name, not number (bug #388). | |
117 | * Handle floating point options for output modules. | |
118 | * If only one non-demo device is present, select it. | |
119 | * Allow input from stdin by specifying "-i -". | |
120 | * Support uint64 input/output module options. | |
121 | * Command line option changes: | |
122 | - Add the --get option. | |
123 | - Add the -T|--transform-module option. | |
124 | * Always save all channels to a session file (bug #410). | |
125 | * Support boolean command line options (bug #450). | |
126 | * NSIS: | |
127 | - Drop libusb0.dll, we always use libusb-1.0 now. | |
128 | - Add start menu entries for Zadig (bug #543). | |
129 | - Install data files into a 'share' subdirectory. | |
130 | - Various additional NSIS file improvements. | |
131 | * Fix a runtime warning with --show (bug #520). | |
132 | * Add "-git-<hash>" suffix to development version numbers. | |
133 | * Fix a libzip-related issue resulting in errors writing .sr files (bug #570). | |
134 | * Fix a unitsize related issue (bug #352). | |
135 | * Add support for SR_T_MQLIST and SR_T_MQ. | |
136 | * Modernize the whole autotools setup. | |
137 | ||
2531ee05 UH |
138 | 0.5.0 (2014-05-06) |
139 | ------------------ | |
140 | ||
141 | * Update sigrok-cli to the new APIs from both libsigrok 0.3.0 and also | |
142 | libsigrokdecode 0.3.0. | |
143 | * Add support for the new channel groups feature in libsigrok. | |
144 | * Report channel groups (drivers) and annotation rows (PDs) in --show. | |
145 | * The protocol decoder output verbosity now depends on the --loglevel used. | |
146 | * Only show the longest annotation per default if multiple are provided by | |
147 | the PD. Higher numbers for the -l option will show them all. | |
148 | * Allow both hex and decimal numbers as values for command-line options. | |
149 | * Add support for an explicit "sigrok" file format option that can be | |
150 | used with --input-format or --output-format (bug #131). | |
151 | * If no PD annotation class is specified, default to showing all (bug #149). | |
152 | * Fix an issue when running decoders with optional channels (bug #138). | |
153 | * Report possible PD option values in --show output (bug #330). | |
154 | * Allow saving of output in continuous mode (bug #122). | |
155 | * Add support for libsigrok's SR_T_DOUBLE_RANGE config key (bug #335). | |
156 | * Add support for config keys of type G_VARIANT_TYPE_INT32. | |
157 | * Fix a bug which involved trying to save a file containing no data. | |
158 | * Fix an internal probe ordering issue (bug #268). | |
159 | * Fix various memory leak issues (bug #134, others). | |
160 | * Fix a bug causing samplerates in session files being zero (bug #340). | |
161 | * Fix segfault during analog acquisition without '-O analog' (bugs #90, #105). | |
162 | * Fix a compile issue when building without libsigrokdecode (bug #351). | |
163 | * Command line option changes: | |
164 | - Add the -g|--channel-group option. | |
165 | - Add the -M option (for PD meta output type support). | |
166 | - Add the -B option (for PD binary output type support). | |
167 | - Rename the -p|--probes option to -C|--channels. | |
168 | * Various improvements to the NSIS file for better Windows installer support. | |
169 | - Ship (redistributable) firmware files in the Windows installer. | |
170 | - Ship libusb0.dll in the Windows installer (bug #243). | |
171 | - Ship zadig.exe and zadig_xp.exe in the Windows installer. | |
172 | - Ship all sample files from sigrok-dumps in the Windows installer. | |
173 | - Don't ship/run the full Python MSI installer, only the required files. | |
174 | - Fix a working directory issue in the installer. | |
175 | * Build system: | |
176 | - Use a non-recursive automake setup (fewer files, less clutter). | |
177 | - configure output: Show which libs are required and which are optional. | |
178 | * manpage: Various documentation updates. | |
179 | ||
363098be | 180 | 0.4.0 (2013-05-04) |
89f3a165 UH |
181 | ------------------ |
182 | ||
183 | * Update sigrok-cli to the new APIs from both libsigrok 0.2.0 and also | |
184 | libsigrokdecode 0.2.0. | |
185 | * Add support for handling analog data sources (DMMs, scopes, dataloggers). | |
186 | * Bugfix in the handling of -A options with arguments. | |
187 | * Updated build dependencies list. | |
188 | - glib (required): Now must be >= 2.28.0. | |
189 | - libsigrok (required): Now must be >= 0.2.0. | |
190 | - libsigrokdecode (required): Now must be >= 0.2.0. | |
191 | * Add support for specifying input format options. | |
192 | * Probe numbers now generally start at 0 (not 1). | |
193 | * Command line option changes: | |
194 | - The -D|--list-devices option was renamed to --scan. | |
195 | - The -d|--device option was renamed to -c|--config. | |
196 | - The -a|--protocol-decoders option was renamed to -P|--protocol-decoders. | |
197 | - The -s|--protocol-decoder-stack option was renamed to | |
198 | -S|--protocol-decoder-stack. | |
199 | - Added a --driver option to specify which libsigrok driver is to be used. | |
200 | - Added a --show option. This can show details about drivers or PDs. | |
201 | - Added a --frames option which limits the number of frames to get from | |
202 | a supported oscilloscope (or other frame-based device). | |
203 | * Various documentation updates (README, manpage, and so on). | |
204 | * configure: Don't overwrite CFLAGS, but rather amend it. | |
205 | ||
e7d1a229 UH |
206 | 0.3.1 (2012-05-30) |
207 | ------------------ | |
208 | ||
209 | * Add a ChangeLog file to the tarball. | |
210 | * -V option: If "-l 3" or higher is used, the PD description is shown, too. | |
211 | * -a option: Print optional/required PD probes. Example: sigrok-cli -a uart. | |
212 | * Fix compiling with "Homebrew" (Mac OS X). | |
213 | * Stacking order doesn't have to be specified if it's the same as the | |
214 | PD list. Example: sigrok-cli -i <file.sr> -a i2c,edid -s i2c,edid. | |
215 | The -s option is no longer required in this special case. | |
216 | * Only output module or PD output goes to stdout, everything else to stderr. | |
217 | * Improved error handling: Stop sigrok-cli upon various PD related errors. | |
218 | * New -A | --protocol-decoder-annotations option which allows the user to | |
219 | select which annotation types (and from which PD in the stack) to show. | |
220 | * Update the manpage. | |
221 | * Fix a Makefile.am bug which caused the generated ChangeLog files being | |
222 | accidentally deleted upon 'make distclean'. | |
223 | ||
9d2c55fd | 224 | 0.3.0 (2012-04-17) |
adeb9353 UH |
225 | ------------------ |
226 | ||
9d2c55fd UH |
227 | * New major version, now depends on libsigrok and libsigrokdecode. |
228 | * Initial support for protocol decoders (written in Python >= 3). | |
229 | Supports streaming processing, and stacking of protocol decoders. | |
230 | Currently supported: dcf77, mx25lxx05d, i2s, spi, edid, pan1321, mlx90614, | |
231 | rtc8564, transitioncounter, usb, i2cdemux, i2c, i2cfilter, uart. | |
232 | * Add support for the ChronoVu LA8 logic analyzer. | |
233 | * Add support for the ChronoVu LA8 input- and output-formats. | |
234 | * Add support for the CSV output format. | |
235 | * New CLI options: --loglevel, --input-format, --protocol-decoders, and | |
236 | --protocol-decoder-stack. | |
237 | * Changed CLI options: Rename -f|--format to -O|--output-format. | |
238 | * Demo driver: Add all-low and all-high pattern support. | |
239 | * Saleae Logic driver: Initial support for multiple attached devices. | |
240 | * OLS driver: Run-Length Encoding (RLE) support. | |
241 | * Various portability fixes for Mac OS X and MinGW/Windows. | |
242 | * Many bugfixes, improvements, and documentation updates. | |
adeb9353 | 243 | |
2b1614bd | 244 | 0.2.0 (2011-04-03) |
adeb9353 UH |
245 | ------------------ |
246 | ||
2b1614bd UH |
247 | This is mostly a bugfix release. |
248 | ||
249 | * Fix session saving & input file loading, implement session loading support. | |
250 | * Initial work on an NSIS-based Windows installer for sigrok. | |
251 | * CLI: Change syntax for -d and -f to <thing>:key=value:key2=value2. | |
252 | * Various bugfixes, internal code improvements, and documentation updates. | |
253 | * Improve MinGW/Windows support in sigrok, fix various Windows issues. | |
254 | * Improve Openbench Logic Sniffer output format support and add metadata | |
255 | support (requires jawi's OLS client >= 0.9.4-rc1). | |
256 | * Add FreeBSD support for sigrok. | |
257 | * Add initial doxygen support (sigrok API documentation). | |
258 | * ASIX SIGMA: Fix a firmware loading bug. | |
adeb9353 | 259 | |
2b1614bd | 260 | 0.1.0 (2011-01-20) |
adeb9353 UH |
261 | ------------------ |
262 | ||
263 | * Initial release. | |
264 |