4 years agocmake: help users by pointing out libsigrok build depencendies
Gerhard Sittig [Tue, 3 Jul 2018 14:46:57 +0000 (16:46 +0200)]
cmake: help users by pointing out libsigrok build depencendies

It appears that users have trouble to relate failed PulseView builds to
missing dependencies during libsigrok configuration. Although the error
occurs early and is stated in the build output, it only gets noticed
late and users forgot about the earlier step, or never bothered to check.

Explicitly test for the availability of the C++ bindings, and print a
message that points to libsigrok's(!) configuration phase. Another
check for the full set of libraries will fail in fatal ways as before.

An unfortunate implementation detail of the cmake check leaves all parts
of the lookup result empty when either(!) of the tested libs is missing.
So we cannot tell with certainty which test failed when the test result
is negative while a list of libraries was passed to the test. That's why
the "soft" individual test with QUIET and without REQUIRED is the least
intrusive adjustment to existing CMake rules, where other locations
depend on the PKGDEPS_* variables.

This change addresses bug #1199.

4 years agocmake: nit, use the message(STATUS) keyword
Gerhard Sittig [Sun, 6 May 2018 09:29:57 +0000 (11:29 +0200)]
cmake: nit, use the message(STATUS) keyword

4 years agomain.cpp: straighten the getopt/optind adjustment before openfiles
Gerhard Sittig [Wed, 6 Jun 2018 16:50:26 +0000 (18:50 +0200)]
main.cpp: straighten the getopt/optind adjustment before openfiles

The pulseview(1) application accepts input file specs either as argument
to the -i option, or as positional arguments after the command line options.

Simplify the logic which collects remaining non-option command line words
after getopt(3) is done. As a byproduct the application code no longer
manipulates a variable that is owned by an external library.

4 years agoanalogsignal.cpp: Fix std::isnan() related compile issue on some systems
Gerhard Sittig [Sun, 17 Jun 2018 16:45:47 +0000 (18:45 +0200)]
analogsignal.cpp: Fix std::isnan() related compile issue on some systems

Re-do for recent source what commit f9abacf20c85 did to solve bug #531.
Explicitly use std::isnan() in checks. Avoid the 'using' directive since
not all platforms that are supported by sigrok do support it.

  pv/views/trace/analogsignal.cpp:54:12: error: 'isnan' is already declared in this scope

4 years agoFix comment
Soeren Apel [Thu, 14 Jun 2018 19:42:13 +0000 (21:42 +0200)]
Fix comment

4 years agoFix up change handler registration
Soeren Apel [Thu, 14 Jun 2018 19:05:07 +0000 (21:05 +0200)]
Fix up change handler registration

Before, the mismatched registration/deregistration lead to
crashes. Example:

Load file, load another file into the same session,
change any setting -> crash because first change notifier is
called but invalid

4 years agoPrevent log length to be set to 0
Soeren Apel [Thu, 14 Jun 2018 15:41:02 +0000 (17:41 +0200)]
Prevent log length to be set to 0

Doing so prevents PV from starting up, so disallow it

4 years agoAnalogSignal: Display value under cursor
Soeren Apel [Thu, 14 Jun 2018 15:38:06 +0000 (17:38 +0200)]
AnalogSignal: Display value under cursor

4 years agoFix #979 by querying trigger types only once and storing them
Soeren Apel [Sun, 10 Jun 2018 06:54:46 +0000 (08:54 +0200)]
Fix #979 by querying trigger types only once and storing them

4 years agoFix #1226 by removing a misplaced trigger marker clear
Soeren Apel [Sun, 10 Jun 2018 06:18:05 +0000 (08:18 +0200)]
Fix #1226 by removing a misplaced trigger marker clear

4 years agoDisable unit tests by default
Soeren Apel [Fri, 8 Jun 2018 07:09:09 +0000 (09:09 +0200)]
Disable unit tests by default

The rationale for this change is that except for developers, pretty
much everyone who builds from source does so because they want to
use the latest changes. However, only developers care about the results
of the unit tests, so this doubles the build time for users without
any real benefit.

Even worse, the unit tests are known to fail on several hosts for
reasons that are within the realm of the unit tests themselves, not
because of broken code. This confuses users and even prevents them
from installing PV for no good reason.

Since the unit tests do still run on Jenkins, there's little to no
coverage gap in my opinion.

4 years agoFix #770 by adding a vertical hover line and a setting for it
Soeren Apel [Tue, 5 Jun 2018 21:11:03 +0000 (23:11 +0200)]
Fix #770 by adding a vertical hover line and a setting for it

4 years agoFix #1040 by allowing multiple files to be loaded from command line
Soeren Apel [Tue, 5 Jun 2018 16:49:12 +0000 (18:49 +0200)]
Fix #1040 by allowing multiple files to be loaded from command line

4 years agoFix #1166 by using the correct array size
Soeren Apel [Tue, 5 Jun 2018 14:57:31 +0000 (16:57 +0200)]
Fix #1166 by using the correct array size

4 years agoSession: Handle failing sigrok::Device::read_config() calls
Soeren Apel [Mon, 4 Jun 2018 16:33:43 +0000 (18:33 +0200)]
Session: Handle failing sigrok::Device::read_config() calls

4 years agodevice.cpp: Add SR_CONF_EXTERNAL_CLOCK_SOURCE.
Uwe Hermann [Tue, 5 Jun 2018 22:25:41 +0000 (00:25 +0200)]

4 years agodevice.cpp: Add missing SR_CONF_DATA_SOURCE entry.
Uwe Hermann [Sun, 3 Jun 2018 17:39:12 +0000 (19:39 +0200)]
device.cpp: Add missing SR_CONF_DATA_SOURCE entry.

4 years agoFix #1198 by removing the 1:1 zoom button
Soeren Apel [Sat, 2 Jun 2018 21:30:57 +0000 (23:30 +0200)]
Fix #1198 by removing the 1:1 zoom button

4 years agoFix #807 by disabling trigger widgets when session is not stopped
Soeren Apel [Sat, 2 Jun 2018 20:12:36 +0000 (22:12 +0200)]
Fix #807 by disabling trigger widgets when session is not stopped

4 years agoUpdate cursor action's state whenever the cursor state changes
Soeren Apel [Sat, 2 Jun 2018 19:52:24 +0000 (21:52 +0200)]
Update cursor action's state whenever the cursor state changes

4 years agoFix #1212 by not resetting the cursors pointer
Brian Starkey [Fri, 1 Jun 2018 17:33:08 +0000 (18:33 +0100)]
Fix #1212 by not resetting the cursors pointer

Calling cursors_.reset() effectively drops the CursorPair, meaning they
can never be used. Remove that.

4 years agoFix #540 by introducing a method to reset the view state
Soeren Apel [Wed, 30 May 2018 21:16:57 +0000 (23:16 +0200)]
Fix #540 by introducing a method to reset the view state

4 years agoFix #956 by adding the missing final sample to the range
Soeren Apel [Wed, 30 May 2018 15:55:32 +0000 (17:55 +0200)]
Fix #956 by adding the missing final sample to the range

4 years agoFix #1201 by letting more accurate matches replace previous ones
Soeren Apel [Sun, 27 May 2018 08:00:42 +0000 (10:00 +0200)]
Fix #1201 by letting more accurate matches replace previous ones

4 years agoFix #1182 by only considering enabled channels
Soeren Apel [Sun, 27 May 2018 06:49:17 +0000 (08:49 +0200)]
Fix #1182 by only considering enabled channels

4 years agoFix #1203 by catching the boost exception thrown on error
Soeren Apel [Sat, 26 May 2018 18:49:37 +0000 (20:49 +0200)]
Fix #1203 by catching the boost exception thrown on error

4 years agoAdd imported files to the session save/restore mechanism
Soeren Apel [Fri, 25 May 2018 14:07:24 +0000 (16:07 +0200)]
Add imported files to the session save/restore mechanism

This commit also makes the file loading more robust by improving
the handling of cases where files can't be loaded.

4 years agoStoreProgress: Add missing log output
Soeren Apel [Wed, 23 May 2018 19:44:19 +0000 (21:44 +0200)]
StoreProgress: Add missing log output

4 years agoSession: Allow an SR_DF_META packet to override the samplerate
Soeren Apel [Tue, 22 May 2018 07:24:13 +0000 (09:24 +0200)]
Session: Allow an SR_DF_META packet to override the samplerate

Otherwise, the sample rate determined by the read_config() call
in Session::sample_thread_proc() will be kept even if it's wrong
and the driver wants to submit the correct one.

4 years agotracegroup.cpp: Fix a potential unintended integer division.
Uwe Hermann [Mon, 21 May 2018 14:38:13 +0000 (16:38 +0200)]
tracegroup.cpp: Fix a potential unintended integer division.

Reported by Coverity (CID 279773):

  Result is not floating-point (UNINTENDED_INTEGER_DIVISION)
    integer_division: Dividing integer expressions -5 and 2, and then
    converting the integer quotient to type double. Any remainder, or
    fractional part of the quotient, is ignored.

4 years agologicsegment.cpp: Constify a few variables.
Uwe Hermann [Mon, 21 May 2018 14:36:55 +0000 (16:36 +0200)]
logicsegment.cpp: Constify a few variables.

4 years agoLogicSegment::pow2_ceil(): Fix potentіal integer overflow.
Uwe Hermann [Mon, 21 May 2018 14:30:57 +0000 (16:30 +0200)]
LogicSegment::pow2_ceil(): Fix potentіal integer overflow.

Reported by Coverity (CID 50925):

  Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
    overflow_before_widen: Potentially overflowing expression 1 << power
    with type int (32 bits, signed) is evaluated using 32-bit arithmetic,
    and then used in a context that expects an expression of type
    uint64_t const (64 bits, unsigned).

4 years agocursorpair.cpp: Fix a clazy warning (-Wclazy-qstring-arg).
Uwe Hermann [Sat, 19 May 2018 20:28:16 +0000 (22:28 +0200)]
cursorpair.cpp: Fix a clazy warning (-Wclazy-qstring-arg).

  [...]/pv/views/trace/cursorpair.cpp:174:34: warning: Use multi-arg instead [-Wclazy-qstring-arg]
          return QString("%1 / %2").arg(s1).arg(s2);

4 years agodecodetrace.cpp: Drop unused "using std::all_of".
Uwe Hermann [Sat, 19 May 2018 20:26:51 +0000 (22:26 +0200)]
decodetrace.cpp: Drop unused "using std::all_of".

Reported by clang-tidy.

4 years agologicsegment.cpp: Suggest inlining of pack_sample()/unpack_sample().
Uwe Hermann [Sat, 19 May 2018 18:36:39 +0000 (20:36 +0200)]
logicsegment.cpp: Suggest inlining of pack_sample()/unpack_sample().

These functions were not inlined by default (tested with gcc 7.3.0).
They're in a hot code path, so inlining can help with performance here.

4 years agologicsegment.cpp: Add missing config.h #include.
Uwe Hermann [Sat, 19 May 2018 17:31:59 +0000 (19:31 +0200)]
logicsegment.cpp: Add missing config.h #include.

Without this #include, HAVE_UNALIGNED_LITTLE_ENDIAN_ACCESS was not
available and thus the faster path in LogicSegment::unpack_sample() and
LogicSegment::pack_sample() was never used.

4 years agoDecodeSignal: avoid specifying a zero samplerate to libsigrokdecode
Gerhard Sittig [Sat, 12 May 2018 06:31:52 +0000 (08:31 +0200)]
DecodeSignal: avoid specifying a zero samplerate to libsigrokdecode

When the sample rate is not known, avoid claiming the value would be
zero and calling setup routines in backend libraries. Although the call
is not strictly fatal, this simple check avoids potential log messages
at callee's for this unexpected condition.

4 years agosession: apply input format match to interactively loaded files, too
Gerhard Sittig [Mon, 14 May 2018 18:25:41 +0000 (20:25 +0200)]
session: apply input format match to interactively loaded files, too

Move the format match logic from load_init_file() to load_file(), so
that it transparently takes effect on each "opened" file. Users still
can choose to "import" files and specify options when required. In the
case of lookup miss, sigrok session is assumed as before.

This fixes the remainder of bug #1015.

4 years agosession: add support to auto detect input format (for init file)
Gerhard Sittig [Sun, 13 May 2018 06:59:02 +0000 (08:59 +0200)]
session: add support to auto detect input format (for init file)

Extend the Session::load_init_file() method, to have the input format
automatically detected in the absence of an -I spec upon startup.

This fixes part of bug 1015. Input files specified at the command line
when pulseview gets invoked are handled. Files that interactively get
loaded while pulseview is running are not handled yet.

4 years agoInstaller: Add debug shortcut for -l 5
Soeren Apel [Mon, 7 May 2018 19:38:59 +0000 (21:38 +0200)]
Installer: Add debug shortcut for -l 5

4 years agoDecodeTrace: Use qreal instead of int for annotation drawing
Soeren Apel [Thu, 19 Apr 2018 21:31:42 +0000 (23:31 +0200)]
DecodeTrace: Use qreal instead of int for annotation drawing

This is to prevent "blinking" of annotations when they would merge into
blocks and break off of them again, noticeable when zooming in and out
using a track pad or touchscreen.

4 years agoDecodeTrace: Speed up painting by not copying the annotations
Soeren Apel [Thu, 19 Apr 2018 18:44:50 +0000 (20:44 +0200)]
DecodeTrace: Speed up painting by not copying the annotations

4 years agoFix #1149 by handling "d" and "(dd)" types separately
Soeren Apel [Sun, 6 May 2018 18:09:42 +0000 (20:09 +0200)]
Fix #1149 by handling "d" and "(dd)" types separately

4 years agoUpdate property widgets before showing device config popup
Soeren Apel [Sun, 6 May 2018 17:40:10 +0000 (19:40 +0200)]
Update property widgets before showing device config popup

4 years agoDecodeSignal: Prevent out-of-range exception
Soeren Apel [Fri, 4 May 2018 21:53:31 +0000 (23:53 +0200)]
DecodeSignal: Prevent out-of-range exception

4 years agoDecodeSignal: Re-set decoder metadata after stack termination
Soeren Apel [Fri, 4 May 2018 06:58:59 +0000 (08:58 +0200)]
DecodeSignal: Re-set decoder metadata after stack termination

4 years agoLogicSegment: Readability changes
Soeren Apel [Tue, 24 Apr 2018 07:27:15 +0000 (09:27 +0200)]
LogicSegment: Readability changes

4 years agoFix bar displaying undecoded area
Soeren Apel [Sat, 21 Apr 2018 21:28:12 +0000 (23:28 +0200)]
Fix bar displaying undecoded area

Issue #1: As decoding happens while the trace is drawn, the
annotations may actually overlap with the bar because the number
of decoded samples is outdated.

Issue #2: The bar is a little too low and off-center.

4 years agoDecodeTrace: Remove unused members
Soeren Apel [Sat, 21 Apr 2018 15:13:30 +0000 (17:13 +0200)]
DecodeTrace: Remove unused members

4 years agoDecodeSignal: When lacking input, retry only when data is available
Soeren Apel [Sat, 21 Apr 2018 09:09:11 +0000 (11:09 +0200)]
DecodeSignal: When lacking input, retry only when data is available

4 years agoFix #1174 by performing shutdown speed optimizations
Soeren Apel [Fri, 20 Apr 2018 22:14:36 +0000 (00:14 +0200)]
Fix #1174 by performing shutdown speed optimizations

4 years agoDon't use qDebug().noquote() for now (bug #1169)
Soeren Apel [Thu, 19 Apr 2018 21:41:14 +0000 (23:41 +0200)]
Don't use qDebug().noquote() for now (bug #1169)

4 years agoAnnotation: Use special type for the class, not plain int
Soeren Apel [Wed, 18 Apr 2018 06:49:49 +0000 (08:49 +0200)]
Annotation: Use special type for the class, not plain int

4 years agoFix #1162 by always submitting all changed options to libsrd
Soeren Apel [Tue, 17 Apr 2018 20:23:23 +0000 (22:23 +0200)]
Fix #1162 by always submitting all changed options to libsrd

4 years agoChannels popup: Use a more compact one-line button row.
Uwe Hermann [Sun, 15 Apr 2018 15:10:26 +0000 (17:10 +0200)]
Channels popup: Use a more compact one-line button row.

4 years agoinputfile: Increase chunk size from 16KB to 4MB.
Uwe Hermann [Sat, 14 Apr 2018 20:23:52 +0000 (22:23 +0200)]
inputfile: Increase chunk size from 16KB to 4MB.

Use a 4MB chunk size for reading a file into memory. Larger values don't
seem to provide any substancial performance improvements, but can cause
UI lag and a visually "stuttering" display of the data currently loading.

4 years agoinputfile: Use a vector instead of an array on the stack.
Uwe Hermann [Sat, 14 Apr 2018 20:20:43 +0000 (22:20 +0200)]
inputfile: Use a vector instead of an array on the stack.

Increasing the chunk size could cause issues when trying to put
large arrays on the stack.

4 years agoFix #709 by deriving row/ann colors from the channel color
Soeren Apel [Fri, 13 Apr 2018 17:00:13 +0000 (19:00 +0200)]
Fix #709 by deriving row/ann colors from the channel color

4 years agoTrace: Remove unneeded setters
Soeren Apel [Fri, 13 Apr 2018 07:27:38 +0000 (09:27 +0200)]
Trace: Remove unneeded setters

4 years agoChannels: Add missing include
Soeren Apel [Fri, 13 Apr 2018 07:13:07 +0000 (09:13 +0200)]
Channels: Add missing include

4 years agoSignalBase: Don't assume all channel settings are restorable
Soeren Apel [Wed, 11 Apr 2018 21:03:19 +0000 (23:03 +0200)]
SignalBase: Don't assume all channel settings are restorable

4 years agoRename colour* to color*
Soeren Apel [Tue, 10 Apr 2018 17:57:35 +0000 (19:57 +0200)]
Rename colour* to color*

4 years agoCentralize session error notification
Soeren Apel [Sat, 14 Apr 2018 17:35:20 +0000 (19:35 +0200)]
Centralize session error notification

4 years agoFix #1153 by only showing drivers we'll actually scan
Soeren Apel [Mon, 9 Apr 2018 16:50:28 +0000 (18:50 +0200)]
Fix #1153 by only showing drivers we'll actually scan

4 years agoChannels: Break up logic and analog channels into separate grids
Soeren Apel [Sun, 15 Apr 2018 06:19:42 +0000 (08:19 +0200)]
Channels: Break up logic and analog channels into separate grids

This way, a named analog channel (e.g. "SDA analog") won't visually disturb
the alignment of the logic channels if there are only ungrouped channels.

To see this change in effect, you may compare using sainsmart_dds120_powerup_scl_analog.sr

4 years agoChannels: Let "Enable all changing" also check for sample data
Soeren Apel [Sun, 8 Apr 2018 21:03:33 +0000 (23:03 +0200)]
Channels: Let "Enable all changing" also check for sample data

4 years agoChannels: Don't use flat buttons and add vertical spacer
Soeren Apel [Sun, 8 Apr 2018 20:33:42 +0000 (22:33 +0200)]
Channels: Don't use flat buttons and add vertical spacer

With the buttons being flat, users may not recognize the labels as
buttons intuitively. Hence, make the buttons explicitly appear as
such. To make the dialog more aesthetically pleasing, we add some
vertical space between the check boxes and the buttons.

4 years agoChannels: Re-arrange selector buttons
Soeren Apel [Sun, 8 Apr 2018 20:00:06 +0000 (22:00 +0200)]
Channels: Re-arrange selector buttons

4 years agoSession: Don't process packets without sample data
Soeren Apel [Sun, 8 Apr 2018 18:41:48 +0000 (20:41 +0200)]
Session: Don't process packets without sample data

4 years agoFix #1023 by implementing filtering channel selectors
Soeren Apel [Thu, 5 Apr 2018 20:23:28 +0000 (22:23 +0200)]
Fix #1023 by implementing filtering channel selectors

4 years agoDecodeSignal: Use srd_session_terminate_reset() for multi-segment data
Soeren Apel [Thu, 5 Apr 2018 17:03:20 +0000 (19:03 +0200)]
DecodeSignal: Use srd_session_terminate_reset() for multi-segment data

4 years agoApply option changes immediately, not on decode stack rebuild
Soeren Apel [Thu, 5 Apr 2018 07:07:36 +0000 (09:07 +0200)]
Apply option changes immediately, not on decode stack rebuild

4 years agoAdd DecodeSignal and Session error logging
Soeren Apel [Wed, 4 Apr 2018 17:07:27 +0000 (19:07 +0200)]
Add DecodeSignal and Session error logging

4 years agoLogging: Make logging thread-safe
Soeren Apel [Sun, 1 Apr 2018 08:24:55 +0000 (10:24 +0200)]
Logging: Make logging thread-safe

Otherwise, we crash when two threads try to add entries to the log
at the same time.

4 years agoview.cpp: Drop unneeded parenthesis.
Uwe Hermann [Sun, 1 Apr 2018 17:52:36 +0000 (19:52 +0200)]
view.cpp: Drop unneeded parenthesis.

4 years agoFix build with -DENABLE_DECODE=n.
Uwe Hermann [Sun, 1 Apr 2018 17:52:18 +0000 (19:52 +0200)]
Fix build with -DENABLE_DECODE=n.

4 years agoFix two clang-tidy warnings.
Uwe Hermann [Sun, 1 Apr 2018 17:28:43 +0000 (19:28 +0200)]
Fix two clang-tidy warnings.

4 years agoCMakeLists.txt: Set CMake policy CMP0054 to NEW.
Uwe Hermann [Sun, 1 Apr 2018 17:26:16 +0000 (19:26 +0200)]
CMakeLists.txt: Set CMake policy CMP0054 to NEW.

This prevents the following warnings upon a second cmake run:

  CMake Warning (dev) at /usr/share/cmake-3.10/Modules/CMakePushCheckState.cmake:65 (if):
    Policy CMP0054 is not set: Only interpret if() arguments as variables or
    keywords when unquoted.  Run "cmake --help-policy CMP0054" for policy
    details.  Use the cmake_policy command to set the policy and suppress this
    Quoted variables like "HAVE_CXX_ATOMICS_WITHOUT_LIB" will no longer be
    dereferenced when the policy is set to NEW.  Since the policy is not set
    the OLD behavior will be used.
  Call Stack (most recent call first):
    CMakeLists.txt:123 (cmake_push_check_state)
    CMakeLists.txt:139 (check_working_cxx_atomics)
  This warning is for project developers.  Use -Wno-dev to suppress it.

4 years agoCMakeLists.txt: Set CMake policy CMP0071 to NEW.
Uwe Hermann [Sat, 31 Mar 2018 22:05:11 +0000 (00:05 +0200)]
CMakeLists.txt: Set CMake policy CMP0071 to NEW.

This fixes bug #1143.

4 years agoDecodeSignal: Re-create SRD session when changes are pending
Soeren Apel [Sun, 4 Feb 2018 15:52:55 +0000 (16:52 +0100)]
DecodeSignal: Re-create SRD session when changes are pending

4 years agoDecodeSignal: Reset and re-use existing decoder sessions
Gerhard Sittig [Tue, 2 Jan 2018 19:03:56 +0000 (20:03 +0100)]
DecodeSignal: Reset and re-use existing decoder sessions

Instead of destroying and re-creating decoder sessions, re-use
previously created sessions by just terminating their current work and
resetting internal state.

This implementation most proboably is incomplete in respect of changes
to the stack hierarchy or individual decoders' properties. This needs
more attention. When the stack is kept but its configuration has changed,
the involved properties need to get "somehow applied to" the stack's
instances before re-using it with new input data will yield correct results.

4 years agologging: Minor consistency fixes.
Uwe Hermann [Fri, 30 Mar 2018 20:27:29 +0000 (22:27 +0200)]
logging: Minor consistency fixes.

4 years agologging: Use different color for srd log messages.
Uwe Hermann [Fri, 30 Mar 2018 20:24:43 +0000 (22:24 +0200)]
logging: Use different color for srd log messages.

The old brown color looked pretty reddish on some monitors (which
could be confused to mean "error"), select a slightly different color.

4 years agoSession: Set "segment complete" flags when no frames are used
Soeren Apel [Fri, 30 Mar 2018 21:06:31 +0000 (23:06 +0200)]
Session: Set "segment complete" flags when no frames are used

Without this, A2L conversion is skipped for segment sizes smaller
than ConversionBlockSize, e.g. when acquiring only 100 samples.

4 years agoReally fix #1125 (and maybe #1139)
Soeren Apel [Fri, 30 Mar 2018 21:03:28 +0000 (23:03 +0200)]
Really fix #1125 (and maybe #1139)

4 years agomanpage: Mention -s | --log-to-stdout option.
Uwe Hermann [Fri, 30 Mar 2018 18:20:46 +0000 (20:20 +0200)]
manpage: Mention -s | --log-to-stdout option.

4 years agoGlobalSettings: Announce settings changes to allow logging
Soeren Apel [Fri, 30 Mar 2018 17:08:58 +0000 (19:08 +0200)]
GlobalSettings: Announce settings changes to allow logging

4 years agoSettings: Change page list design
Soeren Apel [Thu, 29 Mar 2018 19:12:01 +0000 (21:12 +0200)]
Settings: Change page list design

This may also fix #1095, we'll see.

4 years agoMain: Create human-readable stack trace and notify user
Soeren Apel [Fri, 30 Mar 2018 15:56:28 +0000 (17:56 +0200)]
Main: Create human-readable stack trace and notify user

4 years agoMain: Add missing --no-scan long option for -D
Soeren Apel [Fri, 30 Mar 2018 08:27:23 +0000 (10:27 +0200)]
Main: Add missing --no-scan long option for -D

4 years agoMain: Add -s option to allow logging to console as before
Soeren Apel [Fri, 30 Mar 2018 08:26:34 +0000 (10:26 +0200)]
Main: Add -s option to allow logging to console as before

4 years agoSignalHandler: Rename include guard
Soeren Apel [Fri, 30 Mar 2018 16:08:05 +0000 (18:08 +0200)]
SignalHandler: Rename include guard

4 years agoAdd logging mechanism
Soeren Apel [Tue, 27 Mar 2018 13:19:04 +0000 (15:19 +0200)]
Add logging mechanism

4 years agoAdd boost::stacktrace support
Soeren Apel [Tue, 27 Mar 2018 14:25:17 +0000 (16:25 +0200)]
Add boost::stacktrace support

4 years agoCMakeLists.txt: Fix a build issue on MSYS2.
Uwe Hermann [Sun, 25 Mar 2018 21:15:25 +0000 (23:15 +0200)]
CMakeLists.txt: Fix a build issue on MSYS2.

Only apply an MXE-specific workaround on MXE (but not when building
natively using MSYS2), otherwise there are issues on MSYS2.

4 years agoCMakeLists.txt: Only add Qt5PlatformSupport for Qt < 5.8.0.
Uwe Hermann [Sun, 25 Mar 2018 19:02:48 +0000 (21:02 +0200)]
CMakeLists.txt: Only add Qt5PlatformSupport for Qt < 5.8.0.

Qt5PlatformSupport was removed in Qt 5.8.0.

4 years agofix catching polymorphic types by value
Dan Horák [Fri, 23 Mar 2018 20:33:18 +0000 (21:33 +0100)]
fix catching polymorphic types by value

Compiling with GCC 8 produces a new warning about catching polymorphic
types by value. Proper way is to use references instead.

/home/sharkcz/projects/pulseview/main.cpp: In function ‘int main(int, char**)’:
/home/sharkcz/projects/pulseview/main.cpp:229:22: error: catching polymorphic type ‘class std::exception’ by value [-Werror=catch-value=]
   } catch (exception e) {
cc1plus: all warnings being treated as errors

4 years agoFix #1128 by showing firmware and PD search paths in settings dialog
Soeren Apel [Sat, 17 Mar 2018 18:59:06 +0000 (19:59 +0100)]
Fix #1128 by showing firmware and PD search paths in settings dialog

4 years agoApply changes suggested by clang-tidy
Soeren Apel [Thu, 8 Mar 2018 23:31:51 +0000 (00:31 +0100)]
Apply changes suggested by clang-tidy

4 years agoFix #1125 by adding a missing typecast
Soeren Apel [Thu, 8 Mar 2018 23:28:42 +0000 (00:28 +0100)]
Fix #1125 by adding a missing typecast

Without this typecast, the return type of get_sample_count() is
a uint64_t, which doesn't go well when it's 0 and we subtract 1
from it. Assigning the result of this underflow to an int64_t
doesn't help, it's too late.