--- /dev/null
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * irmpconfig.h
+ *
+ * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
+ *
+ * Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de
+ * Extensions for PIC 12F1820 W.Strobl 2014-07-20
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#ifndef _IRMP_H_
+# error please include only irmp.h, not irmpconfig.h
+#endif
+
+#ifdef IRMPCONFIG_STAGE1_H
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change IRMP_32_BIT here
+ *
+ * Normally, IRMP_32_BIT ist 0. Then we use irmp.command as a 16 bit value.
+ * If you set IRMP_32_BIT to 1, we will use irmp.command as a 32 bit value.
+ * A 32 bit command costs more CPU resources on 8 bit processors (e.g. AVR),
+ * but there are IR protocols which need more than 16 bits for a reasonable
+ * command value.
+ *
+ * If you want to use one of the following protocols, set IRMP_32_BIT to 1,
+ * otherwise set it to 0:
+ * - MERLIN
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#define IRMP_32_BIT 0 // use 32 bit command value, 0 or 1
+
+#endif // IRMPCONFIG_STAGE1_H
+#ifdef IRMPCONFIG_STAGE2_H
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change F_INTERRUPTS if you change the number of interrupts per second,
+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
+ * A value above 15000 costs additional program space, absolute maximum value is 20000.
+ * On PIC with XC8/C18 Compiler, use 15151 as the correct value.
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef F_INTERRUPTS
+# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change settings from 1 to 0 if you want to disable one or more decoders.
+ * This saves program space.
+ *
+ * 1 enable decoder
+ * 0 disable decoder
+ *
+ * The standard decoders are enabled per default.
+ * Less common protocols are disabled here, you need to enable them manually.
+ *
+ * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
+ * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
+ * You cannot enable both DENON and RUWIDO, only enable one of them.
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
+#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
+#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE + ONKYO >= 10000 ~300 bytes
+#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes
+#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
+
+// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
+#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
+#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes
+#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes
+#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes
+#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes
+#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes
+#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes
+#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes
+#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
+#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes
+#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes
+
+// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
+#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes
+#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes
+#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes
+#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes
+#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes
+#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes
+#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes
+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes
+#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes
+#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes
+#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)
+#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes
+#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes
+#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)
+#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
+#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes
+#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes
+#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes
+#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes
+#define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes
+#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes
+#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)
+#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes
+#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes
+#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes
+#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes
+#define IRMP_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 ~250 bytes
+#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes
+#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi Aircond >= 10000 ~250 bytes
+#define IRMP_SUPPORT_VINCENT_PROTOCOL 0 // VINCENT >= 10000 ~250 bytes
+#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 0 // SAMSUNG AH >= 10000 ~250 bytes
+#define IRMP_SUPPORT_IRMP16_PROTOCOL 0 // IRMP specific >= 15000 ~250 bytes
+#define IRMP_SUPPORT_GREE_PROTOCOL 0 // GREE CLIMATE >= 10000 ~250 bytes
+#define IRMP_SUPPORT_RCII_PROTOCOL 0 // RCII T+A >= 15000 ~250 bytes
+#define IRMP_SUPPORT_METZ_PROTOCOL 0 // METZ >= 15000 ~250 bytes
+
+#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for ATMEL ATMega/ATTiny/XMega
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR
+# define IRMP_PORT_LETTER B
+# define IRMP_BIT_NUMBER 6
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for PIC C18 or XC8 compiler
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)
+# if defined(__12F1840)
+# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler
+# else
+# define IRMP_PIN PORTBbits.RB4 // PIC C18
+# endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for PIC CCS compiler
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (PIC_CCS)
+# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for ARM STM32
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (ARM_STM32) // use C13 as IR input on STM32
+# define IRMP_PORT_LETTER C
+# define IRMP_BIT_NUMBER 13
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Hardware pin for ARM STM32 (HAL) - don't change here, define IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN in STM32Cube (Main.h)
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (ARM_STM32_HAL) // STM32: IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN must be defined in STM32Cube
+# define IRMP_PORT_LETTER IRMP_Receive_GPIO_Port
+# define IRMP_BIT_NUMBER IRMP_Receive_Pin
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for Stellaris ARM Cortex M4
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F
+# define IRMP_PORT_LETTER B
+# define IRMP_BIT_NUMBER 4
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for STM8
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (SDCC_STM8) // use PA1 as IR input on STM8
+# define IRMP_PORT_LETTER A
+# define IRMP_BIT_NUMBER 1
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for ESP8266
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (__xtensa__)
+# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (TEENSY_ARM_CORTEX_M4)
+# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for MBED
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined(__MBED__)
+# define IRMP_PIN P0_22 // use P1_27 on LPC1347
+# define IRMP_PINMODE PullUp // hardware dependent
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Change hardware pin here for ChibiOS HAL
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined(_CHIBIOS_HAL_)
+# define IRMP_PIN LINE_IR_IN // use pin names as defined in the board config file, prefixed with "LINE_"
+# define IRMP_LOGGING_SD SD1 // the ChibiOS HAL Serial Driver instance to log to
+ // (when IRMP_LOGGING is enabled below).
+ // Make sure SERIAL_BUFFERS_SIZE is large enough when enabling logging
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Handling of unknown target system: DON'T CHANGE
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif !defined (UNIX_OR_WINDOWS)
+# error target system not defined.
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_LOGGING
+# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Use external logging routines
+ * If you enable external logging, you have also to enable IRMP_LOGGING above
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_EXT_LOGGING
+# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_PROTOCOL_NAMES
+# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Use Callbacks to indicate input signal
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_USE_CALLBACK
+# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Call the user-provided irmp_idle() function when IRMP is idle.
+ * Can be used to disable the timer irq and enter a sleep mode to save power
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef IRMP_USE_IDLE_CALL
+# define IRMP_USE_IDLE_CALL 0 // 1: use idle calls. 0: do not. default is 0
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Use ChibiOS Events to signal that valid IR data was received
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#if defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_)
+
+# ifndef IRMP_USE_EVENT
+# define IRMP_USE_EVENT 0 // 1: use event. 0: do not. default is 0
+# endif
+
+# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_BIT)
+# define IRMP_EVENT_BIT 1 // event flag or bit to send
+# endif
+# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_THREAD_PTR)
+# define IRMP_EVENT_THREAD_PTR ir_receive_thread_p // pointer to the thread to send the event to
+extern thread_t *IRMP_EVENT_THREAD_PTR; // the pointer must be defined and initialized elsewhere
+# endif
+
+#endif // _CHIBIOS_RT_ || _CHIBIOS_NIL_
+
+#endif // _IRMPCONFIG_STAGE2_H_
projects / libsigrokdecode.git / blobdiff