# [<packet-type>, <rxtx>, <packet-data>]
#
# This is the list of <packet-types>s and their respective <packet-data>:
# [<packet-type>, <rxtx>, <packet-data>]
#
# This is the list of <packet-types>s and their respective <packet-data>:
-# - T_START: The data is the (integer) value of the start bit (0 or 1).
-# - T_DATA: The data is the (integer) value of the UART data. Valid values
+# - 'STARTBIT': The data is the (integer) value of the start bit (0 or 1).
+# - 'DATA': The data is the (integer) value of the UART data. Valid values
-# - T_PARITY: The data is the (integer) value of the parity bit (0 or 1).
-# - T_STOP: The data is the (integer) value of the stop bit (0 or 1).
-# - T_INVALID_START: The data is the (integer) value of the start bit (0 or 1).
-# - T_INVALID_STOP: The data is the (integer) value of the stop bit (0 or 1).
-# - T_PARITY_ERROR: The data is a tuple with two entries. The first one is
+# - 'PARITYBIT': The data is the (integer) value of the parity bit (0 or 1).
+# - 'STOPBIT': The data is the (integer) value of the stop bit (0 or 1).
+# - 'INVALID STARTBIT': The data is the (integer) value of the start bit
+# (0 or 1).
+# - 'INVALID STOPBIT': The data is the (integer) value of the stop bit
+# (0 or 1).
+# - 'PARITY ERROR': The data is a tuple with two entries. The first one is
# Given a parity type to check (odd, even, zero, one), the value of the
# parity bit, the value of the data, and the length of the data (5-9 bits,
# usually 8 bits) return True if the parity is correct, False otherwise.
# Given a parity type to check (odd, even, zero, one), the value of the
# parity bit, the value of the data, and the length of the data (5-9 bits,
# usually 8 bits) return True if the parity is correct, False otherwise.
{'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
{'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
]
{'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
{'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
]
options = {
'baudrate': ['Baud rate', 115200],
'num_data_bits': ['Data bits', 8], # Valid: 5-9.
options = {
'baudrate': ['Baud rate', 115200],
'num_data_bits': ['Data bits', 8], # Valid: 5-9.
# The startbit must be 0. If not, we report an error.
if self.startbit[rxtx] != 0:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# The startbit must be 0. If not, we report an error.
if self.startbit[rxtx] != 0:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.state[rxtx] = GET_DATA_BITS
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.state[rxtx] = GET_DATA_BITS
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.put(self.frame_start[rxtx], self.samplenum, self.out_ann,
[ANN_ASCII, ['Start bit', 'Start', 'S']])
self.put(self.frame_start[rxtx], self.samplenum, self.out_ann,
[ANN_ASCII, ['Start bit', 'Start', 'S']])
self.state[rxtx] = GET_PARITY_BIT
self.put(self.startsample[rxtx], self.samplenum - 1, self.out_proto,
self.state[rxtx] = GET_PARITY_BIT
self.put(self.startsample[rxtx], self.samplenum - 1, self.out_proto,
s = 'RX: ' if (rxtx == RX) else 'TX: '
self.putx(rxtx, [ANN_ASCII, [s + chr(self.databyte[rxtx])]])
s = 'RX: ' if (rxtx == RX) else 'TX: '
self.putx(rxtx, [ANN_ASCII, [s + chr(self.databyte[rxtx])]])
self.databyte[rxtx], self.options['num_data_bits']):
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.databyte[rxtx], self.options['num_data_bits']):
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity bit', 'Parity', 'P']])
else:
# TODO: Fix range.
# TODO: Return expected/actual parity values.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity bit', 'Parity', 'P']])
else:
# TODO: Fix range.
# TODO: Return expected/actual parity values.
self.put(self.samplenum, self.samplenum, self.out_proto,
- [T_PARITY_ERROR, rxtx, (0, 1)]) # FIXME: Dummy tuple...
+ ['PARITY ERROR', rxtx, (0, 1)]) # FIXME: Dummy tuple...
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity error', 'Parity err', 'PE']])
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity error', 'Parity err', 'PE']])
# Stop bits must be 1. If not, we report an error.
if self.stopbit1[rxtx] != 1:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# Stop bits must be 1. If not, we report an error.
if self.stopbit1[rxtx] != 1:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# TODO: Abort? Ignore the frame? Other?
self.state[rxtx] = WAIT_FOR_START_BIT
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
# TODO: Abort? Ignore the frame? Other?
self.state[rxtx] = WAIT_FOR_START_BIT
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Stop bit', 'Stop', 'P']])
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Stop bit', 'Stop', 'P']])