##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
# [<packet-type>, <rxtx>, <packet-data>]
#
# This is the list of <packet-types>s and their respective <packet-data>:
# [<packet-type>, <rxtx>, <packet-data>]
#
# This is the list of <packet-types>s and their respective <packet-data>:
-# - T_START: The data is the (integer) value of the start bit (0 or 1).
-# - T_DATA: The data is the (integer) value of the UART data. Valid values
+# - 'STARTBIT': The data is the (integer) value of the start bit (0 or 1).
+# - 'DATA': The data is the (integer) value of the UART data. Valid values
-# - T_PARITY: The data is the (integer) value of the parity bit (0 or 1).
-# - T_STOP: The data is the (integer) value of the stop bit (0 or 1).
-# - T_INVALID_START: The data is the (integer) value of the start bit (0 or 1).
-# - T_INVALID_STOP: The data is the (integer) value of the stop bit (0 or 1).
-# - T_PARITY_ERROR: The data is a tuple with two entries. The first one is
+# - 'PARITYBIT': The data is the (integer) value of the parity bit (0 or 1).
+# - 'STOPBIT': The data is the (integer) value of the stop bit (0 or 1).
+# - 'INVALID STARTBIT': The data is the (integer) value of the start bit
+# (0 or 1).
+# - 'INVALID STOPBIT': The data is the (integer) value of the stop bit
+# (0 or 1).
+# - 'PARITY ERROR': The data is a tuple with two entries. The first one is
# Given a parity type to check (odd, even, zero, one), the value of the
# parity bit, the value of the data, and the length of the data (5-9 bits,
# usually 8 bits) return True if the parity is correct, False otherwise.
# Given a parity type to check (odd, even, zero, one), the value of the
# parity bit, the value of the data, and the length of the data (5-9 bits,
# usually 8 bits) return True if the parity is correct, False otherwise.
{'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
{'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
]
{'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
{'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
]
options = {
'baudrate': ['Baud rate', 115200],
'num_data_bits': ['Data bits', 8], # Valid: 5-9.
options = {
'baudrate': ['Baud rate', 115200],
'num_data_bits': ['Data bits', 8], # Valid: 5-9.
- 'parity': ['Parity', PARITY_NONE],
- 'parity_check': ['Check parity', True],
+ 'parity_type': ['Parity type', PARITY_NONE],
+ 'parity_check': ['Check parity?', True], # TODO: Bool supported?
'num_stop_bits': ['Stop bit(s)', STOP_BITS_1],
'bit_order': ['Bit order', LSB_FIRST],
# TODO: Options to invert the signal(s).
'num_stop_bits': ['Stop bit(s)', STOP_BITS_1],
'bit_order': ['Bit order', LSB_FIRST],
# TODO: Options to invert the signal(s).
- # Set protocol decoder option defaults.
- self.baudrate = Decoder.options['baudrate'][1]
- self.num_data_bits = Decoder.options['num_data_bits'][1]
- self.parity = Decoder.options['parity'][1]
- self.check_parity = Decoder.options['parity_check'][1]
- self.num_stop_bits = Decoder.options['num_stop_bits'][1]
- self.bit_order = Decoder.options['bit_order'][1]
-
def start(self, metadata):
self.samplerate = metadata['samplerate']
self.out_proto = self.add(srd.OUTPUT_PROTO, 'uart')
self.out_ann = self.add(srd.OUTPUT_ANN, 'uart')
def start(self, metadata):
self.samplerate = metadata['samplerate']
self.out_proto = self.add(srd.OUTPUT_PROTO, 'uart')
self.out_ann = self.add(srd.OUTPUT_ANN, 'uart')
# The startbit must be 0. If not, we report an error.
if self.startbit[rxtx] != 0:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# The startbit must be 0. If not, we report an error.
if self.startbit[rxtx] != 0:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.state[rxtx] = GET_DATA_BITS
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.state[rxtx] = GET_DATA_BITS
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
self.put(self.frame_start[rxtx], self.samplenum, self.out_ann,
[ANN_ASCII, ['Start bit', 'Start', 'S']])
self.put(self.frame_start[rxtx], self.samplenum, self.out_ann,
[ANN_ASCII, ['Start bit', 'Start', 'S']])
- self.databyte[rxtx] |= (signal << (self.num_data_bits - 1))
- elif self.bit_order == MSB_FIRST:
+ self.databyte[rxtx] |= \
+ (signal << (self.options['num_data_bits'] - 1))
+ elif self.options['bit_order'] == MSB_FIRST:
self.cur_data_bit[rxtx] += 1
return
self.state[rxtx] = GET_PARITY_BIT
self.put(self.startsample[rxtx], self.samplenum - 1, self.out_proto,
self.cur_data_bit[rxtx] += 1
return
self.state[rxtx] = GET_PARITY_BIT
self.put(self.startsample[rxtx], self.samplenum - 1, self.out_proto,
s = 'RX: ' if (rxtx == RX) else 'TX: '
self.putx(rxtx, [ANN_ASCII, [s + chr(self.databyte[rxtx])]])
s = 'RX: ' if (rxtx == RX) else 'TX: '
self.putx(rxtx, [ANN_ASCII, [s + chr(self.databyte[rxtx])]])
def get_parity_bit(self, rxtx, signal):
# If no parity is used/configured, skip to the next state immediately.
def get_parity_bit(self, rxtx, signal):
# If no parity is used/configured, skip to the next state immediately.
- if parity_ok(self.parity[rxtx], self.paritybit[rxtx],
- self.databyte[rxtx], self.num_data_bits):
+ if parity_ok(self.options['parity_type'], self.paritybit[rxtx],
+ self.databyte[rxtx], self.options['num_data_bits']):
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity bit', 'Parity', 'P']])
else:
# TODO: Fix range.
# TODO: Return expected/actual parity values.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity bit', 'Parity', 'P']])
else:
# TODO: Fix range.
# TODO: Return expected/actual parity values.
self.put(self.samplenum, self.samplenum, self.out_proto,
- [T_PARITY_ERROR, rxtx, (0, 1)]) # FIXME: Dummy tuple...
+ ['PARITY ERROR', rxtx, (0, 1)]) # FIXME: Dummy tuple...
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity error', 'Parity err', 'PE']])
# TODO: Currently only supports 1 stop bit.
def get_stop_bits(self, rxtx, signal):
# Skip samples until we're in the middle of the stop bit(s).
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Parity error', 'Parity err', 'PE']])
# TODO: Currently only supports 1 stop bit.
def get_stop_bits(self, rxtx, signal):
# Skip samples until we're in the middle of the stop bit(s).
- skip_parity = 0 if self.parity == PARITY_NONE else 1
- if not self.reached_bit(rxtx, self.num_data_bits + 1 + skip_parity):
+ skip_parity = 0 if self.options['parity_type'] == PARITY_NONE else 1
+ b = self.options['num_data_bits'] + 1 + skip_parity
+ if not self.reached_bit(rxtx, b):
# Stop bits must be 1. If not, we report an error.
if self.stopbit1[rxtx] != 1:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# Stop bits must be 1. If not, we report an error.
if self.stopbit1[rxtx] != 1:
self.put(self.frame_start[rxtx], self.samplenum, self.out_proto,
# TODO: Abort? Ignore the frame? Other?
self.state[rxtx] = WAIT_FOR_START_BIT
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
# TODO: Abort? Ignore the frame? Other?
self.state[rxtx] = WAIT_FOR_START_BIT
# TODO: Fix range.
self.put(self.samplenum, self.samplenum, self.out_proto,
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Stop bit', 'Stop', 'P']])
self.put(self.samplenum, self.samplenum, self.out_ann,
[ANN_ASCII, ['Stop bit', 'Stop', 'P']])
- def decode(self, ss, es, data): # TODO
+ def decode(self, ss, es, data):
+ # TODO: Either RX or TX could be omitted (optional probe).
for (samplenum, (rx, tx)) in data:
# TODO: Start counting at 0 or 1? Increase before or after?
for (samplenum, (rx, tx)) in data:
# TODO: Start counting at 0 or 1? Increase before or after?
elif self.state[rxtx] == GET_STOP_BITS:
self.get_stop_bits(rxtx, signal)
else:
elif self.state[rxtx] == GET_STOP_BITS:
self.get_stop_bits(rxtx, signal)
else: