## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
- 'STARTBIT': The data is the (integer) value of the start bit (0/1).
- 'DATA': This is always a tuple containing two items:
- 1st item: the (integer) value of the UART data. Valid values
- range from 0 to 512 (as the data can be up to 9 bits in size).
+ range from 0 to 511 (as the data can be up to 9 bits in size).
- 2nd item: the list of individual data bits and their ss/es numbers.
- 'PARITYBIT': The data is the (integer) value of the parity bit (0/1).
- 'STOPBIT': The data is the (integer) value of the stop bit (0 or 1).
'values': (0.0, 0.5, 1.0, 1.5)},
{'id': 'bit_order', 'desc': 'Bit order', 'default': 'lsb-first',
'values': ('lsb-first', 'msb-first')},
- {'id': 'format', 'desc': 'Data format', 'default': 'ascii',
+ {'id': 'format', 'desc': 'Data format', 'default': 'hex',
'values': ('ascii', 'dec', 'hex', 'oct', 'bin')},
{'id': 'invert_rx', 'desc': 'Invert RX?', 'default': 'no',
'values': ('yes', 'no')},
self.out_python = self.register(srd.OUTPUT_PYTHON)
self.out_binary = self.register(srd.OUTPUT_BINARY)
self.out_ann = self.register(srd.OUTPUT_ANN)
+ self.bw = (self.options['num_data_bits'] + 7) // 8
def metadata(self, key, value):
if key == srd.SRD_CONF_SAMPLERATE:
return True
return False
- def reached_bit_last(self, rxtx, bitnum):
- bitpos = self.frame_start[rxtx] + ((bitnum + 1) * self.bit_width)
- if self.samplenum >= bitpos:
- return True
- return False
-
def wait_for_start_bit(self, rxtx, old_signal, signal):
# The start bit is always 0 (low). As the idle UART (and the stop bit)
# level is 1 (high), the beginning of a start bit is a falling edge.
self.startbit[rxtx] = signal
- # The startbit must be 0. If not, we report an error.
+ # The startbit must be 0. If not, we report an error and wait
+ # for the next start bit (assuming this one was spurious).
if self.startbit[rxtx] != 0:
self.putp(['INVALID STARTBIT', rxtx, self.startbit[rxtx]])
self.putg([rxtx + 10, ['Frame error', 'Frame err', 'FE']])
- # TODO: Abort? Ignore rest of the frame?
+ self.state[rxtx] = 'WAIT FOR START BIT'
+ return
self.cur_data_bit[rxtx] = 0
self.datavalue[rxtx] = 0
self.cur_data_bit[rxtx] += 1
return
+ # Skip to either reception of the parity bit, or reception of
+ # the STOP bits if parity is not applicable.
self.state[rxtx] = 'GET PARITY BIT'
+ if self.options['parity_type'] == 'none':
+ self.state[rxtx] = 'GET STOP BITS'
self.putpx(rxtx, ['DATA', rxtx,
(self.datavalue[rxtx], self.databits[rxtx])])
- b, f = self.datavalue[rxtx], self.options['format']
- if f == 'ascii':
- c = chr(b) if b in range(30, 126 + 1) else '[%02X]' % b
- self.putx(rxtx, [rxtx, [c]])
- elif f == 'dec':
- self.putx(rxtx, [rxtx, [str(b)]])
- elif f == 'hex':
- self.putx(rxtx, [rxtx, [hex(b)[2:].zfill(2).upper()]])
- elif f == 'oct':
- self.putx(rxtx, [rxtx, [oct(b)[2:].zfill(3)]])
- elif f == 'bin':
- self.putx(rxtx, [rxtx, [bin(b)[2:].zfill(8)]])
-
- self.putbin(rxtx, [rxtx, bytes([b])])
- self.putbin(rxtx, [2, bytes([b])])
+ b = self.datavalue[rxtx]
+ formatted = self.format_value(b)
+ if formatted is not None:
+ self.putx(rxtx, [rxtx, [formatted]])
+
+ bdata = b.to_bytes(self.bw, byteorder='big')
+ self.putbin(rxtx, [rxtx, bdata])
+ self.putbin(rxtx, [2, bdata])
self.databits[rxtx] = []
- def get_parity_bit(self, rxtx, signal):
- # If no parity is used/configured, skip to the next state immediately.
- if self.options['parity_type'] == 'none':
- self.state[rxtx] = 'GET STOP BITS'
- return
+ def format_value(self, v):
+ # Format value 'v' according to configured options.
+ # Reflects the user selected kind of representation, as well as
+ # the number of data bits in the UART frames.
+
+ fmt, bits = self.options['format'], self.options['num_data_bits']
+
+ # Assume "is printable" for values from 32 to including 126,
+ # below 32 is "control" and thus not printable, above 127 is
+ # "not ASCII" in its strict sense, 127 (DEL) is not printable,
+ # fall back to hex representation for non-printables.
+ if fmt == 'ascii':
+ if v in range(32, 126 + 1):
+ return chr(v)
+ hexfmt = "[{:02X}]" if bits <= 8 else "[{:03X}]"
+ return hexfmt.format(v)
+
+ # Mere number to text conversion without prefix and padding
+ # for the "decimal" output format.
+ if fmt == 'dec':
+ return "{:d}".format(v)
+
+ # Padding with leading zeroes for hex/oct/bin formats, but
+ # without a prefix for density -- since the format is user
+ # specified, there is no ambiguity.
+ if fmt == 'hex':
+ digits = (bits + 4 - 1) // 4
+ fmtchar = "X"
+ elif fmt == 'oct':
+ digits = (bits + 3 - 1) // 3
+ fmtchar = "o"
+ elif fmt == 'bin':
+ digits = bits
+ fmtchar = "b"
+ else:
+ fmtchar = None
+ if fmtchar is not None:
+ fmt = "{{:0{:d}{:s}}}".format(digits, fmtchar)
+ return fmt.format(v)
+
+ return None
+ def get_parity_bit(self, rxtx, signal):
# Skip samples until we're in the middle of the parity bit.
if not self.reached_bit(rxtx, self.options['num_data_bits'] + 1):
return
projects / libsigrokdecode.git / blobdiff