# TODO: URLs
#
-import sigrok
+#
+# Protocol output format:
+# put(<startsample>, <endsample>, self.out_proto, <packet>)
+#
+# The <packet> is a list with two entries:
+# [<packet-type>, <packet-data>]
+#
+# Valid packet-type values: T_START, T_DATA, T_PARITY, T_STOP, T_INVALID_START,
+# T_INVALID_STOP, T_PARITY_ERROR
+#
+# The packet-data field has the following format and meaning:
+# - T_START: The data is the (integer) value of the start bit (0 or 1).
+# - T_DATA: The data is the (integer) value of the UART data. Valid values
+# range from 0 to 512 (as the data can be up to 9 bits in size).
+# - T_PARITY: The data is the (integer) value of the parity bit (0 or 1).
+# - T_STOP: The data is the (integer) value of the stop bit (0 or 1).
+# - T_INVALID_START: The data is the (integer) value of the start bit (0 or 1).
+# - T_INVALID_STOP: The data is the (integer) value of the stop bit (0 or 1).
+# - T_PARITY_ERROR: The data is a tuple with two entries. The first one is
+# the expected parity value, the second is the actual parity value.
+#
+# Examples:
+# [T_START, 0]
+# [T_DATA, 65]
+# [T_PARITY, 0]
+# [T_STOP, 1]
+# [T_INVALID_START, 1]
+# [T_INVALID_STOP, 0]
+# [T_PARITY_ERROR, (0, 1)]
+#
+
+import sigrokdecode
# States
WAIT_FOR_START_BIT = 0
LSB_FIRST = 0
MSB_FIRST = 1
-# Output data formats
-DATA_FORMAT_ASCII = 0
-DATA_FORMAT_HEX = 1
-
-# TODO: Remove me later.
-quick_hack = 1
-
-class Sample():
- def __init__(self, data):
- self.data = data
- def probe(self, probe):
- s = ord(self.data[probe / 8]) & (1 << (probe % 8))
- return True if s else False
-
-def sampleiter(data, unitsize):
- for i in range(0, len(data), unitsize):
- yield(Sample(data[i:i+unitsize]))
+# Annotation feed formats
+ANN_ASCII = 0
+ANN_DEC = 1
+ANN_HEX = 2
+ANN_OCT = 3
+ANN_BITS = 4
+
+# Protocol output packet types
+T_START = 0
+T_DATA = 1
+T_PARITY = 2
+T_STOP = 3
+T_INVALID_START = 4
+T_INVALID_STOP = 5
+T_PARITY_ERROR = 6
# Given a parity type to check (odd, even, zero, one), the value of the
# parity bit, the value of the data, and the length of the data (5-9 bits,
else:
raise Exception('Invalid parity type: %d' % parity_type)
-class Decoder(sigrok.Decoder):
+class Decoder(sigrokdecode.Decoder):
id = 'uart'
name = 'UART'
longname = 'Universal Asynchronous Receiver/Transmitter (UART)'
license = 'gplv2+'
inputs = ['logic']
outputs = ['uart']
- probes = {
+ probes = [
# Allow specifying only one of the signals, e.g. if only one data
# direction exists (or is relevant).
- ## 'rx': {'ch': 0, 'name': 'RX', 'desc': 'UART receive line'},
- ## 'tx': {'ch': 1, 'name': 'TX', 'desc': 'UART transmit line'},
- 'rx': 0,
- 'tx': 1,
- }
+ {'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
+ {'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
+ ]
options = {
'baudrate': ['UART baud rate', 115200],
'num_data_bits': ['Data bits', 8], # Valid: 5-9.
'parity_check': ['Check parity', True],
'num_stop_bits': ['Stop bit(s)', STOP_BITS_1],
'bit_order': ['Bit order', LSB_FIRST],
- 'data_format': ['Output data format', DATA_FORMAT_ASCII],
# TODO: Options to invert the signal(s).
# ...
}
+ annotation = [
+ # ANN_ASCII
+ ["ASCII", "TODO: description"],
+ # ANN_DEC
+ ["Decimal", "TODO: description"],
+ # ANN_HEX
+ ["Hex", "TODO: description"],
+ # ANN_OCT
+ ["Octal", "TODO: description"],
+ # ANN_BITS
+ ["Bits", "TODO: description"],
+ ]
def __init__(self, **kwargs):
- self.probes = Decoder.probes.copy()
+ self.out_proto = None
+ self.out_ann = None
# Set defaults, can be overridden in 'start'.
self.baudrate = 115200
self.check_parity = True
self.num_stop_bits = 1
self.bit_order = LSB_FIRST
- self.data_format = DATA_FORMAT_ASCII
self.samplenum = 0
self.frame_start = -1
# Initial state.
self.staterx = WAIT_FOR_START_BIT
- # Get the channel/probe number of the RX/TX signals.
- ## self.rx_bit = self.probes['rx']['ch']
- ## self.tx_bit = self.probes['tx']['ch']
- self.rx_bit = self.probes['rx']
- self.tx_bit = self.probes['tx']
-
self.oldrx = None
self.oldtx = None
def start(self, metadata):
- self.unitsize = metadata['unitsize']
self.samplerate = metadata['samplerate']
+ self.out_proto = self.output_new(sigrokdecode.SRD_OUTPUT_PROTOCOL, 'uart')
+ self.out_ann = self.output_new(sigrokdecode.SRD_OUTPUT_ANNOTATION, 'uart')
# TODO
### self.baudrate = metadata['baudrate']
### self.parity_check = metadata['parity_check']
### self.num_stop_bits = metadata['num_stop_bits']
### self.bit_order = metadata['bit_order']
- ### self.data_format = metadata['data_format']
# The width of one UART bit in number of samples.
self.bit_width = float(self.samplerate) / float(self.baudrate)
def get_start_bit(self, signal):
# Skip samples until we're in the middle of the start bit.
if not self.reached_bit(0):
- return []
+ return
self.startbit = signal
+ # The startbit must be 0. If not, we report an error.
if self.startbit != 0:
- # TODO: Startbit must be 0. If not, we report an error.
- pass
+ self.put(self.frame_start, self.samplenum, self.out_proto,
+ [T_INVALID_START, self.startbit])
+ # TODO: Abort? Ignore rest of the frame?
self.cur_data_bit = 0
self.databyte = 0
self.staterx = GET_DATA_BITS
- if quick_hack: # TODO
- return []
-
- o = [{'type': 'S', 'range': (self.frame_start, self.samplenum),
- 'data': None, 'ann': 'Start bit'}]
- return o
+ self.put(self.frame_start, self.samplenum, self.out_proto,
+ [T_START, self.startbit])
+ self.put(self.frame_start, self.samplenum, self.out_ann,
+ [ANN_ASCII, ['Start bit', 'Start', 'S']])
def get_data_bits(self, signal):
# Skip samples until we're in the middle of the desired data bit.
if not self.reached_bit(self.cur_data_bit + 1):
- return []
+ return
# Save the sample number where the data byte starts.
if self.startsample == -1:
# Return here, unless we already received all data bits.
if self.cur_data_bit < self.num_data_bits - 1: # TODO? Off-by-one?
self.cur_data_bit += 1
- return []
-
- # Convert the data byte into the configured format.
- if self.data_format == DATA_FORMAT_ASCII:
- d = chr(self.databyte)
- elif self.data_format == DATA_FORMAT_HEX:
- d = '0x%02x' % self.databyte
- else:
- raise Exception('Invalid data format value: %d', self.data_format)
+ return
self.staterx = GET_PARITY_BIT
- if quick_hack: # TODO
- return [d]
-
- o = [{'type': 'D', 'range': (self.startsample, self.samplenum - 1),
- 'data': d, 'ann': None}]
+ self.put(self.startsample, self.samplenum - 1, self.out_proto,
+ [T_DATA, self.databyte])
- return o
+ self.put(self.startsample, self.samplenum - 1, self.out_ann,
+ [ANN_ASCII, [chr(self.databyte)]])
+ self.put(self.startsample, self.samplenum - 1, self.out_ann,
+ [ANN_DEC, [str(self.databyte)]])
+ self.put(self.startsample, self.samplenum - 1, self.out_ann,
+ [ANN_HEX, [hex(self.databyte), hex(self.databyte)[2:]]])
+ self.put(self.startsample, self.samplenum - 1, self.out_ann,
+ [ANN_OCT, [oct(self.databyte), oct(self.databyte)[2:]]])
+ self.put(self.startsample, self.samplenum - 1, self.out_ann,
+ [ANN_BITS, [bin(self.databyte), bin(self.databyte)[2:]]])
def get_parity_bit(self, signal):
# If no parity is used/configured, skip to the next state immediately.
if self.parity == PARITY_NONE:
self.staterx = GET_STOP_BITS
- return []
+ return
# Skip samples until we're in the middle of the parity bit.
if not self.reached_bit(self.num_data_bits + 1):
- return []
+ return
self.paritybit = signal
if parity_ok(self.parity, self.paritybit, self.databyte,
self.num_data_bits):
- if quick_hack: # TODO
- # return ['P']
- return []
# TODO: Fix range.
- o = [{'type': 'P', 'range': (self.samplenum, self.samplenum),
- 'data': self.paritybit, 'ann': 'Parity bit'}]
+ self.put(self.samplenum, self.samplenum, self.out_proto,
+ [T_PARITY_BIT, self.paritybit])
+ self.put(self.samplenum, self.samplenum, self.out_ann,
+ [ANN_ASCII, ['Parity bit', 'Parity', 'P']])
else:
- if quick_hack: # TODO
- return ['PE']
- o = [{'type': 'PE', 'range': (self.samplenum, self.samplenum),
- 'data': self.paritybit, 'ann': 'Parity error'}]
-
- return o
+ # TODO: Fix range.
+ # TODO: Return expected/actual parity values.
+ self.put(self.samplenum, self.samplenum, self.out_proto,
+ [T_PARITY_ERROR, (0, 1)]) # FIXME: Dummy tuple...
+ self.put(self.samplenum, self.samplenum, self.out_ann,
+ [ANN_ASCII, ['Parity error', 'Parity err', 'PE']])
# TODO: Currently only supports 1 stop bit.
def get_stop_bits(self, signal):
# Skip samples until we're in the middle of the stop bit(s).
skip_parity = 0 if self.parity == PARITY_NONE else 1
if not self.reached_bit(self.num_data_bits + 1 + skip_parity):
- return []
+ return
self.stopbit1 = signal
+ # Stop bits must be 1. If not, we report an error.
if self.stopbit1 != 1:
- # TODO: Stop bits must be 1. If not, we report an error.
- pass
+ self.put(self.frame_start, self.samplenum, self.out_proto,
+ [T_INVALID_STOP, self.stopbit1])
+ # TODO: Abort? Ignore the frame? Other?
self.staterx = WAIT_FOR_START_BIT
- if quick_hack: # TODO
- return []
-
# TODO: Fix range.
- o = [{'type': 'P', 'range': (self.samplenum, self.samplenum),
- 'data': None, 'ann': 'Stop bit'}]
- return o
-
- def decode(self, data):
- """UART protocol decoder"""
+ self.put(self.samplenum, self.samplenum, self.out_proto,
+ [T_STOP, self.stopbit1])
+ self.put(self.samplenum, self.samplenum, self.out_ann,
+ [ANN_ASCII, ['Stop bit', 'Stop', 'P']])
- out = []
-
- for sample in sampleiter(data["data"], self.unitsize):
-
- # TODO: Eliminate the need for ord().
- s = ord(sample.data)
+ def decode(self, timeoffset, duration, data): # TODO
+ # for (samplenum, (rx, tx)) in data:
+ for (samplenum, (rx,)) in data:
# TODO: Start counting at 0 or 1? Increase before or after?
self.samplenum += 1
# First sample: Save RX/TX value.
if self.oldrx == None:
# Get RX/TX bit values (0/1 for low/high) of the first sample.
- self.oldrx = (s & (1 << self.rx_bit)) >> self.rx_bit
- # self.oldtx = (s & (1 << self.tx_bit)) >> self.tx_bit
+ self.oldrx = rx
+ # self.oldtx = tx
continue
- # Get RX/TX bit values (0/1 for low/high).
- rx = (s & (1 << self.rx_bit)) >> self.rx_bit
- # tx = (s & (1 << self.tx_bit)) >> self.tx_bit
-
# State machine.
if self.staterx == WAIT_FOR_START_BIT:
self.wait_for_start_bit(self.oldrx, rx)
elif self.staterx == GET_START_BIT:
- out += self.get_start_bit(rx)
+ self.get_start_bit(rx)
elif self.staterx == GET_DATA_BITS:
- out += self.get_data_bits(rx)
+ self.get_data_bits(rx)
elif self.staterx == GET_PARITY_BIT:
- out += self.get_parity_bit(rx)
+ self.get_parity_bit(rx)
elif self.staterx == GET_STOP_BITS:
- out += self.get_stop_bits(rx)
+ self.get_stop_bits(rx)
else:
raise Exception('Invalid state: %s' % self.staterx)
self.oldrx = rx
# self.oldtx = tx
- if out != []:
- self.put(out)
+ # if proto != []:
+ # self.put(0, 0, self.out_proto, proto)
+ # if ann != []:
+ # self.put(0, 0, self.out_ann, ann)