+# Annotation formats
+ANN_HEX = 0
+
+class Decoder(srd.Decoder):
+ id = 'spi'
+ name = 'SPI'
+ longname = 'Serial Peripheral Interface (SPI) bus'
+ desc = '...desc...'
+ longdesc = '...longdesc...'
+ author = 'Gareth McMullin'
+ email = 'gareth@blacksphere.co.nz'
+ license = 'gplv2+'
+ inputs = ['logic']
+ outputs = ['spi']
+ probes = [
+ {'id': 'mosi', 'name': 'MOSI',
+ 'desc': 'SPI MOSI line (Master out, slave in)'},
+ {'id': 'miso', 'name': 'MISO',
+ 'desc': 'SPI MISO line (Master in, slave out)'},
+ {'id': 'sck', 'name': 'CLK', 'desc': 'SPI clock line'},
+ {'id': 'cs', 'name': 'CS#', 'desc': 'SPI CS (chip select) line'},
+ ]
+ options = {
+ 'cs_active_low': ['CS# active low', ACTIVE_LOW],
+ 'cpol': ['Clock polarity', CPOL_0],
+ 'cpha': ['Clock phase', CPHA_0],
+ 'bitorder': ['Bit order within the SPI data', MSB_FIRST],
+ 'wordsize': ['Word size of SPI data', 8], # 1-64?
+ }
+ annotations = [
+ ['Hex', 'SPI data bytes in hex format'],
+ ]
+
+ def __init__(self):
+ self.oldsck = 1
+ self.bitcount = 0
+ self.mosidata = 0
+ self.misodata = 0
+ self.bytesreceived = 0
+ self.samplenum = -1
+ self.cs_was_deasserted_during_data_word = 0
+
+ # Set protocol decoder option defaults.
+ self.cs_active_low = Decoder.options['cs_active_low'][1]
+ self.cpol = Decoder.options['cpol'][1]
+ self.cpha = Decoder.options['cpha'][1]
+ self.bitorder = Decoder.options['bitorder'][1]
+ self.wordsize = Decoder.options['wordsize'][1]
+
+ def start(self, metadata):
+ self.out_proto = self.add(srd.OUTPUT_PROTO, 'spi')
+ self.out_ann = self.add(srd.OUTPUT_ANN, 'spi')
+
+ def report(self):
+ return 'SPI: %d bytes received' % self.bytesreceived
+
+ def decode(self, ss, es, data):
+ # HACK! At the moment the number of probes is not handled correctly.
+ # E.g. if an input file (-i foo.sr) has more than two probes enabled.
+ # for (samplenum, (mosi, sck, x, y, z, a)) in data:
+ # for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data:
+ for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data:
+
+ self.samplenum += 1 # FIXME
+
+ # Ignore sample if the clock pin hasn't changed.
+ if sck == self.oldsck:
+ continue
+
+ self.oldsck = sck
+
+ # Sample data on rising/falling clock edge (depends on mode).
+ mode = spi_mode[self.cpol, self.cpha]
+ if mode == 0 and sck == 0: # Sample on rising clock edge
+ continue
+ elif mode == 1 and sck == 1: # Sample on falling clock edge
+ continue
+ elif mode == 2 and sck == 1: # Sample on falling clock edge
+ continue
+ elif mode == 3 and sck == 0: # Sample on rising clock edge
+ continue
+
+ # If this is the first bit, save its sample number.
+ if self.bitcount == 0:
+ self.start_sample = samplenum
+ if cs:
+ self.cs_was_deasserted_during_data_word = 1
+
+ # Receive MOSI bit into our shift register.
+ if self.bitorder == MSB_FIRST:
+ self.mosidata |= mosi << (self.wordsize - 1 - self.bitcount)
+ else:
+ self.mosidata |= mosi << self.bitcount
+
+ # Receive MISO bit into our shift register.
+ if self.bitorder == MSB_FIRST:
+ self.misodata |= miso << (self.wordsize - 1 - self.bitcount)
+ else:
+ self.misodata |= miso << self.bitcount
+
+ self.bitcount += 1
+
+ # Continue to receive if not a byte yet.
+ if self.bitcount != self.wordsize:
+ continue
+
+ self.put(self.start_sample, self.samplenum, self.out_proto,
+ ['data', self.mosidata, self.misodata])
+ self.put(self.start_sample, self.samplenum, self.out_ann,
+ [ANN_HEX, ['MOSI: 0x%02x, MISO: 0x%02x' % (self.mosidata,
+ self.misodata)]])
+
+ if self.cs_was_deasserted_during_data_word:
+ self.put(self.start_sample, self.samplenum, self.out_ann,
+ [ANN_HEX, ['WARNING: CS# was deasserted!']])
+
+ # Reset decoder state.
+ self.mosidata = 0
+ self.misodata = 0
+ self.bitcount = 0
+
+ # Keep stats for summary.
+ self.bytesreceived += 1