##
## This file is part of the libsigrokdecode project.
##
-## Copyright (C) 2015 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2015-2020 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
##
import sigrokdecode as srd
-from common.sdcard import (cmd_names, acmd_names, accepted_voltages, card_status, sd_status)
+from common.srdhelper import SrdIntEnum, SrdStrEnum
+from common.sdcard import (cmd_names, acmd_names, accepted_voltages, sd_status)
+
+responses = '1 1b 2 3 6 7'.split()
+token_fields = 'START TRANSMISSION CMD ARG CRC END'.split()
+reg_card_status = 'OUT_OF_RANGE ADDRESS_ERROR BLOCK_LEN_ERROR ERASE_SEQ_ERROR \
+ ERASE_PARAM WP_VIOLATION CARD_IS_LOCKED LOCK_UNLOCK_FAILED COM_CRC_ERROR \
+ ILLEGAL_COMMAND CARD_ECC_FAILED CC_ERROR ERROR RSVD_DEFERRED_RESPONSE \
+ CSD_OVERWRITE WP_ERASE_SKIP CARD_ECC_DISABLED ERASE_RESET CURRENT_STATE \
+ READY_FOR_DATA RSVD FX_EVENT APP_CMD RSVD_SDIO AKE_SEQ_ERROR RSVD_APP_CMD \
+ RSVD_TESTMODE'.split()
+reg_cid = 'MID OID PNM PRV PSN RSVD MDT CRC ONE'.split()
+reg_csd = 'CSD_STRUCTURE RSVD TAAC NSAC TRAN_SPEED CCC READ_BL_LEN \
+ READ_BL_PARTIAL WRITE_BLK_MISALIGN READ_BLK_MISALIGN DSR_IMP C_SIZE \
+ VDD_R_CURR_MIN VDD_R_CURR_MAX VDD_W_CURR_MIN VDD_W_CURR_MAX C_SIZE_MULT \
+ ERASE_BLK_EN SECTOR_SIZE WP_GRP_SIZE WP_GRP_ENABLE R2W_FACTOR \
+ WRITE_BL_LEN WRITE_BL_PARTIAL FILE_FORMAT_GRP COPY PERM_WRITE_PROTECT \
+ TMP_WRITE_PROTECT FILE_FORMAT CRC ONE'.split()
+
+Pin = SrdIntEnum.from_str('Pin', 'CMD CLK DAT0 DAT1 DAT2 DAT3')
+
+a = ['CMD%d' % i for i in range(64)] + ['ACMD%d' % i for i in range(64)] + \
+ ['RESPONSE_R' + r.upper() for r in responses] + \
+ ['R_STATUS_' + r for r in reg_card_status] + \
+ ['R_CID_' + r for r in reg_cid] + \
+ ['R_CSD_' + r for r in reg_csd] + \
+ ['BIT_' + r for r in ('0', '1')] + \
+ ['F_' + f for f in token_fields] + \
+ ['DECODED_BIT', 'DECODED_F']
+Ann = SrdIntEnum.from_list('Ann', a)
+
+s = ['GET_COMMAND_TOKEN', 'HANDLE_CMD999'] + \
+ ['HANDLE_CMD%d' % i for i in range(64)] + \
+ ['HANDLE_ACMD%d' % i for i in range(64)] + \
+ ['GET_RESPONSE_R%s' % r.upper() for r in responses]
+St = SrdStrEnum.from_list('St', s)
+
+class Bit:
+ def __init__(self, s, e, b):
+ self.ss, self.es, self.bit = s, e ,b
class Decoder(srd.Decoder):
api_version = 3
desc = 'Secure Digital card (SD mode) low-level protocol.'
license = 'gplv2+'
inputs = ['logic']
- outputs = ['sdcard_sd']
+ outputs = []
+ tags = ['Memory']
channels = (
{'id': 'cmd', 'name': 'CMD', 'desc': 'Command'},
{'id': 'clk', 'name': 'CLK', 'desc': 'Clock'},
)
annotations = \
tuple(('cmd%d' % i, 'CMD%d' % i) for i in range(64)) + \
- tuple(('acmd%d' % i, 'ACMD%d' % i) for i in range(64)) + ( \
- ('bits', 'Bits'),
- ('field-start', 'Start bit'),
- ('field-transmission', 'Transmission bit'),
- ('field-cmd', 'Command'),
- ('field-arg', 'Argument'),
- ('field-crc', 'CRC'),
- ('field-end', 'End bit'),
- ('decoded-bits', 'Decoded bits'),
- ('decoded-fields', 'Decoded fields'),
+ tuple(('acmd%d' % i, 'ACMD%d' % i) for i in range(64)) + \
+ tuple(('response_r%s' % r, 'R%s' % r) for r in responses) + \
+ tuple(('reg_status_' + r.lower(), 'Status: ' + r) for r in reg_card_status) + \
+ tuple(('reg_cid_' + r.lower(), 'CID: ' + r) for r in reg_cid) + \
+ tuple(('reg_csd_' + r.lower(), 'CSD: ' + r) for r in reg_csd) + \
+ tuple(('bit_' + r, 'Bit ' + r) for r in ('0', '1')) + \
+ tuple(('field-' + r.lower(), r) for r in token_fields) + \
+ ( \
+ ('decoded-bit', 'Decoded bit'),
+ ('decoded-field', 'Decoded field'),
)
annotation_rows = (
- ('raw-bits', 'Raw bits', (128,)),
- ('decoded-bits', 'Decoded bits', (135,)),
- ('decoded-fields', 'Decoded fields', (136,)),
- ('fields', 'Fields', tuple(range(129, 135))),
- ('cmd', 'Commands', tuple(range(128))),
+ ('raw-bits', 'Raw bits', Ann.prefixes('BIT_')),
+ ('decoded-bits', 'Decoded bits', (Ann.DECODED_BIT,) + Ann.prefixes('R_')),
+ ('decoded-fields', 'Decoded fields', (Ann.DECODED_F,)),
+ ('fields', 'Fields', Ann.prefixes('F_')),
+ ('commands', 'Commands', Ann.prefixes('CMD ACMD RESPONSE_')),
)
def __init__(self):
- self.state = 'GET COMMAND TOKEN'
+ self.reset()
+
+ def reset(self):
+ self.state = St.GET_COMMAND_TOKEN
self.token = []
self.is_acmd = False # Indicates CMD vs. ACMD
self.cmd = None
+ self.last_cmd = None
self.arg = None
def start(self):
self.out_ann = self.register(srd.OUTPUT_ANN)
- def putbit(self, b, data):
- self.put(self.token[b][0], self.token[b][1], self.out_ann, [135, data])
-
def putt(self, data):
- self.put(self.token[0][0], self.token[47][1], self.out_ann, data)
-
- def putt2(self, data):
- self.put(self.token[47][0], self.token[0][1], self.out_ann, data)
+ self.put(self.token[0].ss, self.token[47].es, self.out_ann, data)
def putf(self, s, e, data):
- self.put(self.token[s][0], self.token[e][1], self.out_ann, data)
+ self.put(self.token[s].ss, self.token[e].es, self.out_ann, data)
def puta(self, s, e, data):
- self.put(self.token[47 - 8 - e][0], self.token[47 - 8 - s][1],
+ self.put(self.token[47 - 8 - e].ss, self.token[47 - 8 - s].es,
self.out_ann, data)
- def putc(self, cmd, desc):
+ def putc(self, desc):
+ cmd = Ann.ACMD0 + self.cmd if self.is_acmd else self.cmd
+ self.last_cmd = cmd
self.putt([cmd, ['%s: %s' % (self.cmd_str, desc), self.cmd_str,
self.cmd_str.split(' ')[0]]])
- def putr(self, cmd, desc):
- self.putt([cmd, ['Reply: %s' % desc]])
-
- def putr2(self, cmd, desc):
- self.putt2([cmd, ['Reply: %s' % desc]])
-
- def reset(self):
- self.cmd, self.arg = None, None
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ def putr(self, r):
+ self.putt([r, ['Response: %s' % r.name.split('_')[1]]])
def cmd_name(self, cmd):
c = acmd_names if self.is_acmd else cmd_names
return c.get(cmd, 'Unknown')
- def get_token_bits(self, cmd, n):
+ def get_token_bits(self, cmd_pin, n):
# Get a bit, return True if we already got 'n' bits, False otherwise.
- self.token.append([self.samplenum, self.samplenum, cmd])
+ self.token.append(Bit(self.samplenum, self.samplenum, cmd_pin))
if len(self.token) > 0:
- self.token[len(self.token) - 2][1] = self.samplenum
+ self.token[len(self.token) - 2].es = self.samplenum
if len(self.token) < n:
return False
- self.token[n - 1][1] += self.token[n - 1][0] - self.token[n - 2][0]
+ self.token[n - 1].es += self.token[n - 1].ss - self.token[n - 2].ss
return True
def handle_common_token_fields(self):
# Annotations for each individual bit.
for bit in range(len(self.token)):
- self.putf(bit, bit, [128, ['%d' % s[bit][2]]])
+ self.putf(bit, bit, [Ann.BIT_0 + s[bit].bit, ['%d' % s[bit].bit]])
# CMD[47:47]: Start bit (always 0)
- self.putf(0, 0, [129, ['Start bit', 'Start', 'S']])
+ self.putf(0, 0, [Ann.F_START, ['Start bit', 'Start', 'S']])
# CMD[46:46]: Transmission bit (1 == host)
- t = 'host' if s[1][2] == 1 else 'card'
- self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']])
+ t = 'host' if s[1].bit == 1 else 'card'
+ self.putf(1, 1, [Ann.F_TRANSMISSION, ['Transmission: ' + t, 'T: ' + t, 'T']])
# CMD[45:40]: Command index (BCD; valid: 0-63)
- self.cmd = int('0b' + ''.join([str(s[i][2]) for i in range(2, 8)]), 2)
+ self.cmd = int('0b' + ''.join([str(s[i].bit) for i in range(2, 8)]), 2)
c = '%s (%d)' % (self.cmd_name(self.cmd), self.cmd)
- self.putf(2, 7, [131, ['Command: ' + c, 'Cmd: ' + c,
+ self.putf(2, 7, [Ann.F_CMD, ['Command: ' + c, 'Cmd: ' + c,
'CMD%d' % self.cmd, 'Cmd', 'C']])
# CMD[39:08]: Argument
- self.arg = int('0b' + ''.join([str(s[i][2]) for i in range(8, 40)]), 2)
- self.putf(8, 39, [132, ['Argument: 0x%08x' % self.arg, 'Arg', 'A']])
+ self.arg = int('0b' + ''.join([str(s[i].bit) for i in range(8, 40)]), 2)
+ self.putf(8, 39, [Ann.F_ARG, ['Argument: 0x%08x' % self.arg, 'Arg', 'A']])
# CMD[07:01]: CRC7
- self.crc = int('0b' + ''.join([str(s[i][2]) for i in range(40, 47)]), 2)
- self.putf(40, 46, [133, ['CRC: 0x%x' % self.crc, 'CRC', 'C']])
+ self.crc = int('0b' + ''.join([str(s[i].bit) for i in range(40, 47)]), 2)
+ self.putf(40, 46, [Ann.F_CRC, ['CRC: 0x%x' % self.crc, 'CRC', 'C']])
# CMD[00:00]: End bit (always 1)
- self.putf(47, 47, [134, ['End bit', 'End', 'E']])
+ self.putf(47, 47, [Ann.F_END, ['End bit', 'End', 'E']])
- def get_command_token(self, cmd):
+ def get_command_token(self, cmd_pin):
# Command tokens (48 bits) are sent serially (MSB-first) by the host
# (over the CMD line), either to one SD card or to multiple ones.
#
# - Bits[07:01]: CRC7
# - Bits[00:00]: End bit (always 1)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
self.handle_common_token_fields()
# Handle command.
s = 'ACMD' if self.is_acmd else 'CMD'
self.cmd_str = '%s%d (%s)' % (s, self.cmd, self.cmd_name(self.cmd))
- if self.cmd in (0, 2, 3, 6, 7, 8, 9, 10, 13, 41, 51, 55):
- self.state = 'HANDLE CMD%d' % self.cmd
+ if hasattr(self, 'handle_%s%d' % (s.lower(), self.cmd)):
+ self.state = St['HANDLE_CMD%d' % self.cmd]
else:
- self.state = 'HANDLE CMD999'
- self.putc(self.cmd, '%s%d' % (s, self.cmd))
+ self.state = St.HANDLE_CMD999
+ self.putc('%s%d' % (s, self.cmd))
def handle_cmd0(self):
# CMD0 (GO_IDLE_STATE) -> no response
- self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(0, 'Reset all SD cards')
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ self.puta(0, 31, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Reset all SD cards')
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
def handle_cmd2(self):
# CMD2 (ALL_SEND_CID) -> R2
- self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(2, 'Ask card for CID number')
- self.token, self.state = [], 'GET RESPONSE R2'
+ self.puta(0, 31, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Ask card for CID number')
+ self.token, self.state = [], St.GET_RESPONSE_R2
def handle_cmd3(self):
# CMD3 (SEND_RELATIVE_ADDR) -> R6
- self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(3, 'Ask card for new relative card address (RCA)')
- self.token, self.state = [], 'GET RESPONSE R6'
+ self.puta(0, 31, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Ask card for new relative card address (RCA)')
+ self.token, self.state = [], St.GET_RESPONSE_R6
def handle_cmd6(self):
# CMD6 (SWITCH_FUNC) -> R1
- self.putc(6, 'Switch/check card function')
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.putc('Switch/check card function')
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_cmd7(self):
# CMD7 (SELECT/DESELECT_CARD) -> R1b
- self.putc(7, 'Select / deselect card')
- self.token, self.state = [], 'GET RESPONSE R6'
+ self.putc('Select / deselect card')
+ self.token, self.state = [], St.GET_RESPONSE_R6
def handle_cmd8(self):
# CMD8 (SEND_IF_COND) -> R7
- self.puta(12, 31, [136, ['Reserved', 'Res', 'R']])
- self.puta(8, 11, [136, ['Supply voltage', 'Voltage', 'VHS', 'V']])
- self.puta(0, 7, [136, ['Check pattern', 'Check pat', 'Check', 'C']])
- self.putc(0, 'Send interface condition to card')
- self.token, self.state = [], 'GET RESPONSE R7'
+ self.puta(12, 31, [Ann.DECODED_F, ['Reserved', 'Res', 'R']])
+ self.puta(8, 11, [Ann.DECODED_F, ['Supply voltage', 'Voltage', 'VHS', 'V']])
+ self.puta(0, 7, [Ann.DECODED_F, ['Check pattern', 'Check pat', 'Check', 'C']])
+ self.putc('Send interface condition to card')
+ self.token, self.state = [], St.GET_RESPONSE_R7
# TODO: Handle case when card doesn't reply with R7 (no reply at all).
def handle_cmd9(self):
# CMD9 (SEND_CSD) -> R2
- self.puta(16, 31, [136, ['RCA', 'R']])
- self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(9, 'Send card-specific data (CSD)')
- self.token, self.state = [], 'GET RESPONSE R2'
+ self.puta(16, 31, [Ann.DECODED_F, ['RCA', 'R']])
+ self.puta(0, 15, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Send card-specific data (CSD)')
+ self.token, self.state = [], St.GET_RESPONSE_R2
def handle_cmd10(self):
# CMD10 (SEND_CID) -> R2
- self.puta(16, 31, [136, ['RCA', 'R']])
- self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(9, 'Send card identification data (CID)')
- self.token, self.state = [], 'GET RESPONSE R2'
+ self.puta(16, 31, [Ann.DECODED_F, ['RCA', 'R']])
+ self.puta(0, 15, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Send card identification data (CID)')
+ self.token, self.state = [], St.GET_RESPONSE_R2
def handle_cmd13(self):
# CMD13 (SEND_STATUS) -> R1
- self.puta(16, 31, [136, ['RCA', 'R']])
- self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(13, 'Send card status register')
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.puta(16, 31, [Ann.DECODED_F, ['RCA', 'R']])
+ self.puta(0, 15, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Send card status register')
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_cmd16(self):
# CMD16 (SET_BLOCKLEN) -> R1
- self.puta(0, 31, [136, ['Block length', 'Blocklen', 'BL', 'B']])
- self.putc(16, 'Set the block length to %d bytes' % self.arg)
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.puta(0, 31, [Ann.DECODED_F, ['Block length', 'Blocklen', 'BL', 'B']])
+ self.putc('Set the block length to %d bytes' % self.arg)
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_cmd55(self):
# CMD55 (APP_CMD) -> R1
- self.puta(16, 31, [136, ['RCA', 'R']])
- self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(55, 'Next command is an application-specific command')
+ self.puta(16, 31, [Ann.DECODED_F, ['RCA', 'R']])
+ self.puta(0, 15, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Next command is an application-specific command')
self.is_acmd = True
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_acmd6(self):
# ACMD6 (SET_BUS_WIDTH) -> R1
- self.putc(64 + 6, 'Read SD config register (SCR)')
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.putc('Read SD config register (SCR)')
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_acmd13(self):
# ACMD13 (SD_STATUS) -> R1
- self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']])
- self.putc(64 + 13, 'Set SD status')
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.puta(0, 31, [Ann.DECODED_F, ['Stuff bits', 'Stuff', 'SB', 'S']])
+ self.putc('Set SD status')
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_acmd41(self):
# ACMD41 (SD_SEND_OP_COND) -> R3
- self.puta(0, 23, [136, ['VDD voltage window', 'VDD volt', 'VDD', 'V']])
- self.puta(24, 24, [136, ['S18R']])
- self.puta(25, 27, [136, ['Reserved', 'Res', 'R']])
- self.puta(28, 28, [136, ['XPC']])
- self.puta(29, 29, [136, ['Reserved for eSD', 'Reserved', 'Res', 'R']])
- self.puta(30, 30, [136, ['Host capacity support info', 'Host capacity',
- 'HCS', 'H']])
- self.puta(31, 31, [136, ['Reserved', 'Res', 'R']])
- self.putc(64 + 41, 'Send HCS info and activate the card init process')
- self.token, self.state = [], 'GET RESPONSE R3'
+ self.puta(0, 23, [Ann.DECODED_F,
+ ['VDD voltage window', 'VDD volt', 'VDD', 'V']])
+ self.puta(24, 24, [Ann.DECODED_F, ['S18R']])
+ self.puta(25, 27, [Ann.DECODED_F, ['Reserved', 'Res', 'R']])
+ self.puta(28, 28, [Ann.DECODED_F, ['XPC']])
+ self.puta(29, 29, [Ann.DECODED_F,
+ ['Reserved for eSD', 'Reserved', 'Res', 'R']])
+ self.puta(30, 30, [Ann.DECODED_F,
+ ['Host capacity support info', 'Host capacity', 'HCS', 'H']])
+ self.puta(31, 31, [Ann.DECODED_F, ['Reserved', 'Res', 'R']])
+ self.putc('Send HCS info and activate the card init process')
+ self.token, self.state = [], St.GET_RESPONSE_R3
def handle_acmd51(self):
# ACMD51 (SEND_SCR) -> R1
- self.putc(64 + 51, 'Read SD config register (SCR)')
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.putc('Read SD config register (SCR)')
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_cmd999(self):
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.token, self.state = [], St.GET_RESPONSE_R1
def handle_acmd999(self):
- self.token, self.state = [], 'GET RESPONSE R1'
+ self.token, self.state = [], St.GET_RESPONSE_R1
+
+ def handle_reg_status(self):
+ self.putf(8, 8, [Ann.R_STATUS_OUT_OF_RANGE, ['OUT_OF_RANGE']])
+ self.putf(9, 9, [Ann.R_STATUS_ADDRESS_ERROR, ['ADDRESS_ERROR']])
+ self.putf(10, 10, [Ann.R_STATUS_BLOCK_LEN_ERROR, ['BLOCK_LEN_ERROR']])
+ self.putf(11, 11, [Ann.R_STATUS_ERASE_SEQ_ERROR, ['ERASE_SEQ_ERROR']])
+ self.putf(12, 12, [Ann.R_STATUS_ERASE_PARAM, ['ERASE_PARAM']])
+ self.putf(13, 13, [Ann.R_STATUS_WP_VIOLATION, ['WP_VIOLATION']])
+ self.putf(14, 14, [Ann.R_STATUS_CARD_IS_LOCKED, ['CARD_IS_LOCKED']])
+ self.putf(15, 15, [Ann.R_STATUS_LOCK_UNLOCK_FAILED, ['LOCK_UNLOCK_FAILED']])
+ self.putf(16, 16, [Ann.R_STATUS_COM_CRC_ERROR, ['COM_CRC_ERROR']])
+ self.putf(17, 17, [Ann.R_STATUS_ILLEGAL_COMMAND, ['ILLEGAL_COMMAND']])
+ self.putf(18, 18, [Ann.R_STATUS_CARD_ECC_FAILED, ['CARD_ECC_FAILED']])
+ self.putf(19, 19, [Ann.R_STATUS_CC_ERROR, ['CC_ERROR']])
+ self.putf(20, 20, [Ann.R_STATUS_ERROR, ['ERROR']])
+ self.putf(21, 21, [Ann.R_STATUS_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(22, 22, [Ann.R_STATUS_RSVD_DEFERRED_RESPONSE, ['Reserved for DEFERRED_RESPONSE', 'RSVD_DEFERRED_RESPONSE']])
+ self.putf(23, 23, [Ann.R_STATUS_CSD_OVERWRITE, ['CSD_OVERWRITE']])
+ self.putf(24, 24, [Ann.R_STATUS_WP_ERASE_SKIP, ['WP_ERASE_SKIP']])
+ self.putf(25, 25, [Ann.R_STATUS_CARD_ECC_DISABLED, ['CARD_ECC_DISABLED']])
+ self.putf(26, 26, [Ann.R_STATUS_ERASE_RESET, ['ERASE_RESET']])
+ self.putf(27, 30, [Ann.R_STATUS_CURRENT_STATE, ['CURRENT_STATE']])
+ self.putf(31, 31, [Ann.R_STATUS_READY_FOR_DATA, ['READY_FOR_DATA']])
+ self.putf(32, 32, [Ann.R_STATUS_RSVD, ['RSVD']])
+ self.putf(33, 33, [Ann.R_STATUS_FX_EVENT, ['FX_EVENT']])
+ self.putf(34, 34, [Ann.R_STATUS_APP_CMD, ['APP_CMD']])
+ self.putf(35, 35, [Ann.R_STATUS_RSVD_SDIO, ['Reserved for SDIO card', 'RSVD_SDIO']])
+ self.putf(36, 36, [Ann.R_STATUS_AKE_SEQ_ERROR, ['AKE_SEQ_ERROR']])
+ self.putf(37, 37, [Ann.R_STATUS_RSVD_APP_CMD, ['Reserved for application specific commands', 'RSVD_APP_CMD']])
+ self.putf(38, 39, [Ann.R_STATUS_RSVD_TESTMODE, ['Reserved for manufacturer test mode', 'RSVD_TESTMODE']])
+
+ def handle_reg_cid(self):
+ self.putf(8, 15, [Ann.R_CID_MID, ['Manufacturer ID', 'MID']])
+ self.putf(16, 31, [Ann.R_CID_OID, ['OEM/application ID', 'OID']])
+ self.putf(32, 71, [Ann.R_CID_PNM, ['Product name', 'PNM']])
+ self.putf(72, 79, [Ann.R_CID_PRV, ['Product revision', 'PRV']])
+ self.putf(80, 111, [Ann.R_CID_PSN, ['Product serial number', 'PSN']])
+ self.putf(112, 115, [Ann.R_CID_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(116, 127, [Ann.R_CID_MDT, ['Manufacturing date', 'MDT']])
+ self.putf(128, 134, [Ann.R_CID_CRC, ['CRC7 checksum', 'CRC']])
+ self.putf(135, 135, [Ann.R_CID_ONE, ['Always 1', '1']])
+
+ def handle_reg_csd(self):
+ self.putf(8, 9, [Ann.R_CSD_CSD_STRUCTURE, ['CSD structure', 'CSD_STRUCTURE']])
+ self.putf(10, 15, [Ann.R_CSD_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(16, 23, [Ann.R_CSD_TAAC, ['Data read access-time - 1', 'TAAC']])
+ self.putf(24, 31, [Ann.R_CSD_NSAC, ['Data read access-time - 2 in CLK cycles (NSAC * 100)', 'NSAC']])
+ self.putf(32, 39, [Ann.R_CSD_TRAN_SPEED, ['Max. data transfer rate', 'TRAN_SPEED']])
+ self.putf(40, 51, [Ann.R_CSD_CCC, ['Card command classes', 'CCC']])
+ self.putf(52, 55, [Ann.R_CSD_READ_BL_LEN, ['Max. read data block length', 'READ_BL_LEN']])
+ self.putf(56, 56, [Ann.R_CSD_READ_BL_PARTIAL, ['Partial blocks for read allowed', 'READ_BL_PARTIAL']])
+ self.putf(57, 57, [Ann.R_CSD_WRITE_BLK_MISALIGN, ['Write block misalignment', 'WRITE_BLK_MISALIGN']])
+ self.putf(58, 58, [Ann.R_CSD_READ_BLK_MISALIGN, ['Read block misalignment', 'READ_BLK_MISALIGN']])
+ self.putf(59, 59, [Ann.R_CSD_DSR_IMP, ['DSR implemented', 'DSR_IMP']])
+ self.putf(60, 61, [Ann.R_CSD_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(62, 73, [Ann.R_CSD_C_SIZE, ['Device size', 'C_SIZE']])
+ self.putf(74, 76, [Ann.R_CSD_VDD_R_CURR_MIN, ['Max. read current @VDD min', 'VDD_R_CURR_MIN']])
+ self.putf(77, 79, [Ann.R_CSD_VDD_R_CURR_MAX, ['Max. read current @VDD max', 'VDD_R_CURR_MAX']])
+ self.putf(80, 82, [Ann.R_CSD_VDD_W_CURR_MIN, ['Max. write current @VDD min', 'VDD_W_CURR_MIN']])
+ self.putf(83, 85, [Ann.R_CSD_VDD_W_CURR_MAX, ['Max. write current @VDD max', 'VDD_W_CURR_MAX']])
+ self.putf(86, 88, [Ann.R_CSD_C_SIZE_MULT, ['Device size multiplier', 'C_SIZE_MULT']])
+ self.putf(89, 89, [Ann.R_CSD_ERASE_BLK_EN, ['Erase single block enable', 'ERASE_BLK_EN']])
+ self.putf(90, 96, [Ann.R_CSD_SECTOR_SIZE, ['Erase sector size', 'SECTOR_SIZE']])
+ self.putf(97, 103, [Ann.R_CSD_WP_GRP_SIZE, ['Write protect group size', 'WP_GRP_SIZE']])
+ self.putf(104, 104, [Ann.R_CSD_WP_GRP_ENABLE, ['Write protect group enable', 'WP_GRP_ENABLE']])
+ self.putf(105, 106, [Ann.R_CSD_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(107, 109, [Ann.R_CSD_R2W_FACTOR, ['Write speed factor', 'R2W_FACTOR']])
+ self.putf(110, 113, [Ann.R_CSD_WRITE_BL_LEN, ['Max. write data block length', 'WRITE_BL_LEN']])
+ self.putf(114, 114, [Ann.R_CSD_WRITE_BL_PARTIAL, ['Partial blocks for write allowed', 'WRITE_BL_PARTIAL']])
+ self.putf(115, 119, [Ann.R_CSD_RSVD, ['Reserved', 'RSVD']])
+ self.putf(120, 120, [Ann.R_CSD_FILE_FORMAT_GRP, ['File format group', 'FILE_FORMAT_GRP']])
+ self.putf(121, 121, [Ann.R_CSD_COPY, ['Copy flag', 'COPY']])
+ self.putf(122, 122, [Ann.R_CSD_PERM_WRITE_PROTECT, ['Permanent write protection', 'PERM_WRITE_PROTECT']])
+ self.putf(123, 123, [Ann.R_CSD_TMP_WRITE_PROTECT, ['Temporary write protection', 'TMP_WRITE_PROTECT']])
+ self.putf(124, 125, [Ann.R_CSD_FILE_FORMAT, ['File format', 'FILE_FORMAT']])
+ self.putf(126, 127, [Ann.R_CSD_RSVD, ['Reserved', 'RSVD', 'R']])
+ self.putf(128, 134, [Ann.R_CSD_CRC, ['CRC', 'CRC', 'C']])
+ self.putf(135, 135, [Ann.R_CSD_ONE, ['Always 1', '1']])
# Response tokens can have one of four formats (depends on content).
# They can have a total length of 48 or 136 bits.
# They're sent serially (MSB-first) by the card that the host
# addressed previously, or (synchronously) by all connected cards.
- def handle_response_r1(self, cmd):
+ def handle_response_r1(self, cmd_pin):
# R1: Normal response command
# - Bits[47:47]: Start bit (always 0)
# - Bits[46:46]: Transmission bit (0 == card)
# - Bits[39:08]: Card status
# - Bits[07:01]: CRC7
# - Bits[00:00]: End bit (always 1)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
self.handle_common_token_fields()
- self.putr(55, 'R1')
- self.puta(0, 31, [136, ['Card status', 'Status', 'S']])
- for i in range(32):
- self.putbit(8 + i, [card_status[31 - i]])
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ self.putr(Ann.RESPONSE_R1)
+ self.puta(0, 31, [Ann.DECODED_F, ['Card status', 'Status', 'S']])
+ self.handle_reg_status()
+
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
- def handle_response_r1b(self, cmd):
+ def handle_response_r1b(self, cmd_pin):
# R1b: Same as R1 with an optional busy signal (on the data line)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
self.handle_common_token_fields()
- self.puta(0, 31, [136, ['Card status', 'Status', 'S']])
- self.putr(55, 'R1b')
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ self.puta(0, 31, [Ann.DECODED_F, ['Card status', 'Status', 'S']])
+ self.putr(Ann.RESPONSE_R1B)
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
- def handle_response_r2(self, cmd):
+ def handle_response_r2(self, cmd_pin):
# R2: CID/CSD register
# - Bits[135:135]: Start bit (always 0)
# - Bits[134:134]: Transmission bit (0 == card)
# - Bits[133:128]: Reserved (always 0b111111)
# - Bits[127:001]: CID or CSD register including internal CRC7
# - Bits[000:000]: End bit (always 1)
- if not self.get_token_bits(cmd, 136):
+ if not self.get_token_bits(cmd_pin, 136):
return
# Annotations for each individual bit.
for bit in range(len(self.token)):
- self.putf(bit, bit, [128, ['%d' % self.token[bit][2]]])
- self.putf(0, 0, [129, ['Start bit', 'Start', 'S']])
- t = 'host' if self.token[1][2] == 1 else 'card'
- self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']])
- self.putf(2, 7, [131, ['Reserved', 'Res', 'R']])
- self.putf(8, 134, [132, ['Argument', 'Arg', 'A']])
- self.putf(135, 135, [134, ['End bit', 'End', 'E']])
- self.putf(8, 134, [136, ['CID/CSD register', 'CID/CSD', 'C']])
- self.putf(0, 135, [55, ['R2']])
- self.token, self.state = [], 'GET COMMAND TOKEN'
-
- def handle_response_r3(self, cmd):
+ self.putf(bit, bit, [Ann.BIT_0 + self.token[bit].bit, ['%d' % self.token[bit].bit]])
+ self.putf(0, 0, [Ann.F_START, ['Start bit', 'Start', 'S']])
+ t = 'host' if self.token[1].bit == 1 else 'card'
+ self.putf(1, 1, [Ann.F_TRANSMISSION, ['Transmission: ' + t, 'T: ' + t, 'T']])
+ self.putf(2, 7, [Ann.F_CMD, ['Reserved', 'Res', 'R']])
+ self.putf(8, 134, [Ann.F_ARG, ['Argument', 'Arg', 'A']])
+ self.putf(135, 135, [Ann.F_END, ['End bit', 'End', 'E']])
+ self.putf(8, 134, [Ann.DECODED_F, ['CID/CSD register', 'CID/CSD', 'C']])
+ self.putf(0, 135, [Ann.RESPONSE_R2, ['Response: R2']])
+
+ if self.last_cmd in (Ann.CMD2, Ann.CMD10):
+ self.handle_reg_cid()
+
+ if self.last_cmd == Ann.CMD9:
+ self.handle_reg_csd()
+
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
+
+ def handle_response_r3(self, cmd_pin):
# R3: OCR register
# - Bits[47:47]: Start bit (always 0)
# - Bits[46:46]: Transmission bit (0 == card)
# - Bits[39:08]: OCR register
# - Bits[07:01]: Reserved (always 0b111111)
# - Bits[00:00]: End bit (always 1)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
- self.putr(55, 'R3')
+ self.putr(Ann.RESPONSE_R3)
# Annotations for each individual bit.
for bit in range(len(self.token)):
- self.putf(bit, bit, [128, ['%d' % self.token[bit][2]]])
- self.putf(0, 0, [129, ['Start bit', 'Start', 'S']])
- t = 'host' if self.token[1][2] == 1 else 'card'
- self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']])
- self.putf(2, 7, [131, ['Reserved', 'Res', 'R']])
- self.putf(8, 39, [132, ['Argument', 'Arg', 'A']])
- self.putf(40, 46, [133, ['Reserved', 'Res', 'R']])
- self.putf(47, 47, [134, ['End bit', 'End', 'E']])
- self.puta(0, 31, [136, ['OCR register', 'OCR reg', 'OCR', 'O']])
- self.token, self.state = [], 'GET COMMAND TOKEN'
-
- def handle_response_r6(self, cmd):
+ self.putf(bit, bit, [Ann.BIT_0 + self.token[bit].bit, ['%d' % self.token[bit].bit]])
+ self.putf(0, 0, [Ann.F_START, ['Start bit', 'Start', 'S']])
+ t = 'host' if self.token[1].bit == 1 else 'card'
+ self.putf(1, 1, [Ann.F_TRANSMISSION, ['Transmission: ' + t, 'T: ' + t, 'T']])
+ self.putf(2, 7, [Ann.F_CMD, ['Reserved', 'Res', 'R']])
+ self.putf(8, 39, [Ann.F_ARG, ['Argument', 'Arg', 'A']])
+ self.putf(40, 46, [Ann.F_CRC, ['Reserved', 'Res', 'R']])
+ self.putf(47, 47, [Ann.F_END, ['End bit', 'End', 'E']])
+ self.puta(0, 31, [Ann.DECODED_F, ['OCR register', 'OCR reg', 'OCR', 'O']])
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
+
+ def handle_response_r6(self, cmd_pin):
# R6: Published RCA response
# - Bits[47:47]: Start bit (always 0)
# - Bits[46:46]: Transmission bit (0 == card)
# - Bits[23:08]: Argument[15:0]: Card status bits
# - Bits[07:01]: CRC7
# - Bits[00:00]: End bit (always 1)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
self.handle_common_token_fields()
- self.puta(0, 15, [136, ['Card status bits', 'Status', 'S']])
- self.puta(16, 31, [136, ['Relative card address', 'RCA', 'R']])
- self.putr(55, 'R6')
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ self.puta(0, 15, [Ann.DECODED_F, ['Card status bits', 'Status', 'S']])
+ self.puta(16, 31, [Ann.DECODED_F, ['Relative card address', 'RCA', 'R']])
+ self.putr(Ann.RESPONSE_R6)
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
- def handle_response_r7(self, cmd):
+ def handle_response_r7(self, cmd_pin):
# R7: Card interface condition
# - Bits[47:47]: Start bit (always 0)
# - Bits[46:46]: Transmission bit (0 == card)
# - Bits[15:08]: Echo-back of check pattern
# - Bits[07:01]: CRC7
# - Bits[00:00]: End bit (always 1)
- if not self.get_token_bits(cmd, 48):
+ if not self.get_token_bits(cmd_pin, 48):
return
self.handle_common_token_fields()
- self.putr(55, 'R7')
+ self.putr(Ann.RESPONSE_R7)
# Arg[31:12]: Reserved bits (all-zero)
- self.puta(12, 31, [136, ['Reserved', 'Res', 'R']])
+ self.puta(12, 31, [Ann.DECODED_F, ['Reserved', 'Res', 'R']])
# Arg[11:08]: Voltage accepted
- v = ''.join(str(i[2]) for i in self.token[28:32])
+ v = ''.join(str(i.bit) for i in self.token[28:32])
av = accepted_voltages.get(int('0b' + v, 2), 'Unknown')
- self.puta(8, 11, [136, ['Voltage accepted: ' + av, 'Voltage', 'Volt', 'V']])
+ self.puta(8, 11, [Ann.DECODED_F,
+ ['Voltage accepted: ' + av, 'Voltage', 'Volt', 'V']])
# Arg[07:00]: Echo-back of check pattern
- self.puta(0, 7, [136, ['Echo-back of check pattern', 'Echo', 'E']])
+ self.puta(0, 7, [Ann.DECODED_F,
+ ['Echo-back of check pattern', 'Echo', 'E']])
- self.token, self.state = [], 'GET COMMAND TOKEN'
+ self.token, self.state = [], St.GET_COMMAND_TOKEN
def decode(self):
while True:
# Wait for a rising CLK edge.
- (cmd, clk, dat0, dat1, dat2, dat3) = self.wait({1: 'r'})
+ (cmd_pin, clk, dat0, dat1, dat2, dat3) = self.wait({Pin.CLK: 'r'})
# State machine.
- if self.state == 'GET COMMAND TOKEN':
+ if self.state == St.GET_COMMAND_TOKEN:
if len(self.token) == 0:
# Wait for start bit (CMD = 0).
- if cmd != 0:
+ if cmd_pin != 0:
continue
- self.get_command_token(cmd)
- elif self.state.startswith('HANDLE CMD'):
+ self.get_command_token(cmd_pin)
+ elif self.state.value.startswith('HANDLE_CMD'):
# Call the respective handler method for the command.
- a, cmdstr = 'a' if self.is_acmd else '', self.state[10:].lower()
+ a, cmdstr = 'a' if self.is_acmd else '', self.state.value[10:].lower()
handle_cmd = getattr(self, 'handle_%scmd%s' % (a, cmdstr))
handle_cmd()
# Leave ACMD mode again after the first command after CMD55.
if self.is_acmd and cmdstr not in ('55', '63'):
self.is_acmd = False
- elif self.state.startswith('GET RESPONSE'):
+ elif self.state.value.startswith('GET_RESPONSE'):
if len(self.token) == 0:
# Wait for start bit (CMD = 0).
- if cmd != 0:
+ if cmd_pin != 0:
continue
# Call the respective handler method for the response.
- s = 'handle_response_%s' % self.state[13:].lower()
+ s = 'handle_response_%s' % self.state.value[13:].lower()
handle_response = getattr(self, s)
- handle_response(cmd)
+ handle_response(cmd_pin)
projects / libsigrokdecode.git / blobdiff