+++ /dev/null
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2015 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-# Normal commands (CMD)
-# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
-# seem to be mentioned in the spec, but aren't marked as reserved either.
-cmd_names = {
- 0: 'GO_IDLE_STATE',
- # 1: Reserved
- 2: 'ALL_SEND_CID',
- 3: 'SEND_RELATIVE_ADDR',
- 4: 'SET_DSR',
- 5: 'IO_SEND_OP_COND', # SDIO-only
- 6: 'SWITCH_FUNC', # New since spec 1.10
- 7: 'SELECT/DESELECT_CARD',
- 8: 'SEND_IF_COND',
- 9: 'SEND_CSD',
- 10: 'SEND_CID',
- 11: 'VOLTAGE_SWITCH',
- 12: 'STOP_TRANSMISSION',
- 13: 'SEND_STATUS',
- # 14: Reserved
- 15: 'GO_INACTIVE_STATE',
- 16: 'SET_BLOCKLEN',
- 17: 'READ_SINGLE_BLOCK',
- 18: 'READ_MULTIPLE_BLOCK',
- 19: 'SEND_TUNING_BLOCK',
- 20: 'SPEED_CLASS_CONTROL',
- # 21-22: Reserved
- 23: 'SET_BLOCK_COUNT',
- 24: 'WRITE_BLOCK',
- 25: 'WRITE_MULTIPLE_BLOCK',
- 26: 'Reserved for manufacturer',
- 27: 'PROGRAM_CSD',
- 28: 'SET_WRITE_PROT',
- 29: 'CLR_WRITE_PROT',
- 30: 'SEND_WRITE_PROT',
- # 31: Reserved
- 32: 'ERASE_WR_BLK_START',
- 33: 'ERASE_WR_BLK_END',
- 34: 'Reserved for CMD6', # New since spec 1.10
- 35: 'Reserved for CMD6', # New since spec 1.10
- 36: 'Reserved for CMD6', # New since spec 1.10
- 37: 'Reserved for CMD6', # New since spec 1.10
- 38: 'ERASE',
- # 39: Reserved
- 40: 'Reserved for security specification',
- # 41: Reserved
- 42: 'LOCK_UNLOCK',
- # 43-49: Reserved
- 50: 'Reserved for CMD6', # New since spec 1.10
- # 51: Reserved
- 52: 'IO_RW_DIRECT', # SDIO-only
- 53: 'IO_RW_EXTENDED', # SDIO-only
- 54: 'Unknown',
- 55: 'APP_CMD',
- 56: 'GEN_CMD',
- 57: 'Reserved for CMD6', # New since spec 1.10
- # 58-59: Reserved
- 60: 'Reserved for manufacturer',
- 61: 'Reserved for manufacturer',
- 62: 'Reserved for manufacturer',
- 63: 'Reserved for manufacturer',
-}
-
-# Application-specific commands (ACMD)
-# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
-# seem to be mentioned in the spec, but aren't marked as reserved either.
-acmd_names = {
- # 1-5: Reserved
- 6: 'SET_BUS_WIDTH',
- # 7-12: Reserved
- 13: 'SD_STATUS',
- 14: 'Reserved for Security Application',
- 15: 'Reserved for Security Application',
- 16: 'Reserved for Security Application',
- # 17: Reserved
- 18: 'Reserved for SD security applications',
- # 19-21: Reserved
- 22: 'SEND_NUM_WR_BLOCKS',
- 23: 'SET_WR_BLK_ERASE_COUNT',
- # 24: Reserved
- 25: 'Reserved for SD security applications',
- 26: 'Reserved for SD security applications',
- 27: 'Reserved for security specification',
- 28: 'Reserved for security specification',
- # 29: Reserved
- 30: 'Reserved for security specification',
- 31: 'Reserved for security specification',
- 32: 'Reserved for security specification',
- 33: 'Reserved for security specification',
- 34: 'Reserved for security specification',
- 35: 'Reserved for security specification',
- # 36-37: Reserved
- 38: 'Reserved for SD security applications',
- # 39-40: Reserved
- 41: 'SD_SEND_OP_COND',
- 42: 'SET_CLR_CARD_DETECT',
- 43: 'Reserved for SD security applications',
- 44: 'Reserved for SD security applications',
- 45: 'Reserved for SD security applications',
- 46: 'Reserved for SD security applications',
- 47: 'Reserved for SD security applications',
- 48: 'Reserved for SD security applications',
- 49: 'Reserved for SD security applications',
- 50: 'Unknown',
- 51: 'SEND_SCR',
- 52: 'Reserved for security specification',
- 53: 'Reserved for security specification',
- 54: 'Reserved for security specification',
- 55: 'Non-existant', # Doesn't exist (equivalent to CMD55)
- 56: 'Reserved for security specification',
- 57: 'Reserved for security specification',
- 58: 'Reserved for security specification',
- 59: 'Reserved for security specification',
- 60: 'Unknown',
- 61: 'Unknown',
- 62: 'Unknown',
- 63: 'Unknown',
-}
-
-accepted_voltages = {
- 0b0001: '2.7-3.6V',
- 0b0010: 'reserved for low voltage range',
- 0b0100: 'reserved',
- 0b1000: 'reserved',
- # All other values: "not defined".
-}
-
-card_status = {
- 0: 'Reserved for manufacturer test mode',
- 1: 'Reserved for manufacturer test mode',
- 2: 'Reserved for application specific commands',
- 3: 'AKE_SEQ_ERROR',
- 4: 'Reserved for SDIO card',
- 5: 'APP_CMD',
- 6: 'Unknown',
- 7: 'Unknown',
- 8: 'READY_FOR_DATA',
- 9: 'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15).
- 10: 'CURRENT_STATE',
- 11: 'CURRENT_STATE',
- 12: 'CURRENT_STATE',
- 13: 'ERASE_RESET',
- 14: 'CARD_ECC_DISABLED',
- 15: 'WP_ERASE_SKIP',
- 16: 'CSD_OVERWRITE',
- 17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum
- 18: 'Reserved',
- 19: 'ERROR',
- 20: 'CC_ERROR',
- 21: 'CARD_ECC_FAILED',
- 22: 'ILLEGAL_COMMAND',
- 23: 'COM_CRC_ERROR',
- 24: 'LOCK_UNLOCK_FAILED',
- 25: 'CARD_IS_LOCKED',
- 26: 'WP_VIOLATION',
- 27: 'ERASE_PARAM',
- 28: 'ERASE_SEQ_ERROR',
- 29: 'BLOCK_LEN_ERROR',
- 30: 'ADDRESS_ERROR',
- 31: 'OUT_OF_RANGE',
-}
-
-sd_status = {
- # 311:0: Reserved for manufacturer
- # 391:312: Reserved
-}
projects / libsigrokdecode.git / blobdiff