All PDs: Only import the 'Decoder' object.

[libsigrokdecode.git] / decoders / onewire_link / __init__.py

diff --git a/decoders/onewire_link/__init__.py b/decoders/onewire_link/__init__.py
index 5bd6c55e6cdfbd623aed50acbfeacde751531fd4..12aad259290b23db0b283c05fa4f852344dc53d0 100644 (file)
--- a/decoders/onewire_link/__init__.py
+++ b/decoders/onewire_link/__init__.py
@@ -37,7 +37,7 @@ overdrive communication speed. The following minimal values should be used:
  - overdrive available: 2MHz minimum, 5MHz suggested
  - overdrive not available: 400kHz minimum, 1MHz suggested
 
  - overdrive available: 2MHz minimum, 5MHz suggested
  - overdrive not available: 400kHz minimum, 1MHz suggested
 

-Probes:
+Channels:

 1-Wire requires a single signal, but some master implementations might have a
 separate signal used to deliver power to the bus during temperature conversion
 as an example. This power signal is currently not used.
 1-Wire requires a single signal, but some master implementations might have a
 separate signal used to deliver power to the bus during temperature conversion
 as an example. This power signal is currently not used.


@@ -65,5 +65,4 @@ These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.
 '''
 
 read the decoder source code to understand them correctly.
 '''
 

-from .pd import *
-
+from .pd import Decoder