avr_isp: Add more parts

[libsigrokdecode.git] / decoders / ir_nec / lists.py

diff --git a/decoders/ir_nec/lists.py b/decoders/ir_nec/lists.py
index c9dc595e6b82928810c7712a3d6495e9d7104da6..dbb9288d2b864778e74a45ea911318e9da4dd638 100644 (file)
--- a/decoders/ir_nec/lists.py
+++ b/decoders/ir_nec/lists.py
@@ -14,13 +14,14 @@
 ## GNU General Public License for more details.
 ##
 ## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
 ##
 
 # Addresses/devices. Items that are not listed are reserved/unknown.
 address = {
+    0x00: 'Joy-it SBC-IRC01',
     0x40: 'Matsui TV',
+    0xEA41: 'Unknown LED Panel',
 }
 
 digits = {
@@ -48,5 +49,45 @@ command = {
         31: ['Program down', 'P-'],
         68: ['AV', 'AV'],
     }.items())),
-}
 
+    # This is most likely a generic remote control. The PCB
+    # has space for 16 buttons total, of which not all are
+    # connected. The PCB is marked "JSY", "XSK-5462", and
+    # "2014-6-12 JW". It consists of only a single IC, marked
+    # "BJEC107BNE" or similar. The following buttons are
+    # marked for the remote control of a LED panel this was
+    # found in.
+    0xEA41: {
+        0x10: ['Warmer', 'T+'],
+        0x11: ['Colder', 'T-'],
+        0x12: ['Brighter', '+'],
+        0x13: ['Darker', '-'],
+        0x14: ['Off', 'O'],
+        0x15: ['On', 'I'],
+        0x41: ['Min Brightness', 'Min'],
+        0x48: ['Max Brightness', 'Max'],
+    },
+    0x00: {
+        0x45: ['Volume down', 'Vol-'],
+        0x46: ['Play/Pause', 'P/P'],
+        0x47: ['Volume up', 'Vol+'],
+        0x44: ['Setup', 'Set'],
+        0x40: ['Up', 'U'],
+        0x43: ['Stop / Mode', 'S/M'],
+        0x07: ['Left', 'L'],
+        0x15: ['Enter', 'E'],
+        0x09: ['Right', 'R'],
+        0x16: ['0 / 10+', '0'],
+        0x19: ['Down', 'D'],
+        0x0D: ['Back', 'B'],
+        0x0C: ['1', '1'],
+        0x18: ['2', '2'],
+        0x5E: ['3', '3'],
+        0x08: ['4', '4'],
+        0x1C: ['5', '5'],
+        0x5A: ['6', '6'],
+        0x42: ['7', '7'],
+        0x52: ['8', '8'],
+        0x4A: ['9', '9'],
+    }
+}