'ADDRESS WRITE': [7, 'Address write: {b:02X}', 'AW: {b:02X}', '{b:02X}'],
'DATA READ': [8, 'Data read: {b:02X}', 'DR: {b:02X}', '{b:02X}'],
'DATA WRITE': [9, 'Data write: {b:02X}', 'DW: {b:02X}', '{b:02X}'],
+ 'WARN': [10, '{text}'],
}
class Decoder(srd.Decoder):
self.samplerate = None
self.is_write = None
self.rem_addr_bytes = None
+ self.slave_addr_7 = None
+ self.slave_addr_10 = None
self.is_repeat_start = False
- self.state = 'FIND START'
self.pdu_start = None
self.pdu_bits = 0
self.data_bits = []
def putb(self, ss, es, data):
self.put(ss, es, self.out_binary, data)
+ def _wants_start(self):
+ # Check whether START is required (to sync to the input stream).
+ return self.pdu_start is None
+
+ def _collects_address(self):
+ # Check whether the transfer still is in the address phase (is
+ # still collecting address and r/w details, or has not started
+ # collecting it).
+ return self.rem_addr_bytes is None or self.rem_addr_bytes != 0
+
+ def _collects_byte(self):
+ # Check whether bits of a byte are being collected. Outside of
+ # the data byte, the bit is the ACK/NAK slot.
+ return self.data_bits is None or len(self.data_bits) < 8
+
def handle_start(self, ss, es):
if self.is_repeat_start:
cmd = 'START REPEAT'
self.putp(ss, es, [cmd, None])
cls, texts = proto[cmd][0], proto[cmd][1:]
self.putg(ss, es, cls, texts)
- self.state = 'FIND ADDRESS'
self.is_repeat_start = True
self.is_write = None
+ self.slave_addr_7 = None
+ self.slave_addr_10 = None
self.rem_addr_bytes = None
self.data_bits.clear()
self.bitwidth = 0
# the bit value gets sampled. Assume the start of the next bit
# as the end sample number of the previous bit. Guess the last
# bit's end sample number from the second last bit's width.
- # (gsi: Shouldn't falling SCL be the end of the bit value?)
# Keep the bits in receive order (MSB first) during accumulation.
+ # (gsi: Strictly speaking falling SCL would be the end of the
+ # bit value's validity. That'd break compatibility though.)
if self.data_bits:
self.data_bits[-1][2] = ss
self.data_bits.append([value, ss, es])
# Get the byte value. Address and data are transmitted MSB-first.
d = bitpack_msb(self.data_bits, 0)
- if self.state == 'FIND ADDRESS':
- # The READ/WRITE bit is only in the first address byte, not
- # in data bytes. Address bit pattern 0b1111_0xxx means that
- # this is a 10bit slave address, another byte follows. Get
- # the R/W direction and the address bytes count from the
- # first byte in the I2C transfer.
+ ss_byte, es_byte = self.data_bits[0][1], self.data_bits[-1][2]
+
+ # Process the address bytes at the start of a transfer. The
+ # first byte will carry the R/W bit, and all of the 7bit address
+ # or part of a 10bit address. Bit pattern 0b11110xxx signals
+ # that another byte follows which carries the remaining bits of
+ # a 10bit slave address.
+ is_address = self._collects_address()
+ if is_address:
addr_byte = d
if self.rem_addr_bytes is None:
if (addr_byte & 0xf8) == 0xf0:
if self.is_write is None:
read_bit = bool(addr_byte & 1)
if self.options['address_format'] == 'shifted':
- d = d >> 1
+ d >>= 1
self.is_write = False if read_bit else True
- else:
+ elif self.slave_addr_10 is not None:
self.slave_addr_10 |= addr_byte
-
+ else:
+ cls, texts = proto['WARN'][0], proto['WARN'][1:]
+ msg = 'Unhandled address byte'
+ texts = [t.format(text = msg) for t in texts]
+ self.putg(ss_byte, es_byte, cls, texts)
+ is_write = self.is_write
+ is_seven = self.slave_addr_7 is not None
+
+ # Determine annotation classes depending on whether the byte is
+ # an address or payload data, and whether it's written or read.
bin_class = -1
- if self.state == 'FIND ADDRESS' and self.is_write:
+ if is_address and is_write:
cmd = 'ADDRESS WRITE'
bin_class = 1
- elif self.state == 'FIND ADDRESS' and not self.is_write:
+ elif is_address and not is_write:
cmd = 'ADDRESS READ'
bin_class = 0
- elif self.state == 'FIND DATA' and self.is_write:
+ elif not is_address and is_write:
cmd = 'DATA WRITE'
bin_class = 3
- elif self.state == 'FIND DATA' and not self.is_write:
+ elif not is_address and not is_write:
cmd = 'DATA READ'
bin_class = 2
- ss_byte, es_byte = self.data_bits[0][1], self.data_bits[-1][2]
-
# Reverse the list of bits to LSB first order before emitting
# annotations and passing bits to upper layers. This may be
# unexpected because the protocol is MSB first, but it keeps
texts = [t.format(b = bit_value) for t in texts]
self.putg(ss_bit, es_bit, cls, texts)
- if cmd.startswith('ADDRESS') and has_rw_bit:
+ if is_address and has_rw_bit:
# Assign the last bit's location to the R/W annotation.
# Adjust the address value's location to the left.
ss_bit, es_bit = self.data_bits[-1][1], self.data_bits[-1][2]
texts = [t.format(b = d) for t in texts]
self.putg(ss_byte, es_byte, cls, texts)
- # Done with this packet.
- self.data_bits.clear()
- self.state = 'FIND ACK'
-
def get_ack(self, ss, es, value):
ss_bit, es_bit = ss, es
- cmd = 'NACK' if value == 1 else 'ACK'
+ cmd = 'ACK' if value == 0 else 'NACK'
self.putp(ss_bit, es_bit, [cmd, None])
cls, texts = proto[cmd][0], proto[cmd][1:]
self.putg(ss_bit, es_bit, cls, texts)
# remain in the data phase of the transfer otherwise.
if self.rem_addr_bytes:
self.rem_addr_bytes -= 1
- if self.rem_addr_bytes:
- self.state = 'FIND ADDRESS'
- else:
- self.state = 'FIND DATA'
+ self.data_bits.clear()
def handle_stop(self, ss, es):
# Meta bitrate
self.putp(ss, es, [cmd, None])
cls, texts = proto[cmd][0], proto[cmd][1:]
self.putg(ss, es, cls, texts)
- self.state = 'FIND START'
self.is_repeat_start = False
self.is_write = None
self.data_bits.clear()
# here and pass ss, es, and bit values to handling routines.
while True:
# State machine.
- if self.state == 'FIND START':
+ # BEWARE! This implementation expects to see valid traffic,
+ # is rather picky in which phase which symbols get handled.
+ # This attempts to support severely undersampled captures,
+ # which a previous implementation happened to read instead
+ # of rejecting the inadequate input data.
+ # NOTE that handling bits at the start of their validity,
+ # and assuming that they remain valid until the next bit
+ # starts, is also done for backwards compatibility.
+ if self._wants_start():
# Wait for a START condition (S): SCL = high, SDA = falling.
pins = self.wait({0: 'h', 1: 'f'})
ss, es = self.samplenum, self.samplenum
self.handle_start(ss, es)
- elif self.state == 'FIND ADDRESS':
+ elif self._collects_address() and self._collects_byte():
# Wait for a data bit: SCL = rising.
pins = self.wait({0: 'r'})
_, sda = pins
- ss, es = self.samplenum, self.samplenum # TODO plus bitwidth
+ ss, es = self.samplenum, self.samplenum + self.bitwidth
self.handle_address_or_data(ss, es, sda)
- elif self.state == 'FIND DATA':
+ elif self._collects_byte():
# Wait for any of the following conditions (or combinations):
# a) Data sampling of receiver: SCL = rising, and/or
# b) START condition (S): SCL = high, SDA = falling, and/or
# Check which of the condition(s) matched and handle them.
if self.matched[0]:
_, sda = pins
- ss, es = self.samplenum, self.samplenum # TODO plus bitwidth
+ ss, es = self.samplenum, self.samplenum + self.bitwidth
self.handle_address_or_data(ss, es, sda)
elif self.matched[1]:
ss, es = self.samplenum, self.samplenum
elif self.matched[2]:
ss, es = self.samplenum, self.samplenum
self.handle_stop(ss, es)
- elif self.state == 'FIND ACK':
+ else:
# Wait for a data/ack bit: SCL = rising.
pins = self.wait({0: 'r'})
_, sda = pins
projects / libsigrokdecode.git / blobdiff