##
## This file is part of the sigrok project.
##
-## Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2010-2011 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
#
# START condition (S): SDA = falling, SCL = high
# Repeated START condition (Sr): same as S
+# Data bit sampling: SCL = rising
# STOP condition (P): SDA = rising, SCL = high
#
# All data bytes on SDA are exactly 8 bits long (transmitted MSB-first).
'address-space': ['Address space (in bits)', 7],
}
- def __init__(self, unitsize, **kwargs):
- # Metadata comes in here, we don't care for now.
- # print kwargs
- self.unitsize = unitsize
-
+ def __init__(self, **kwargs):
self.probes = Decoder.probes.copy()
# TODO: Don't hardcode the number of channels.
self.channels = 8
self.samplenum = 0
-
self.bitcount = 0
self.databyte = 0
self.wr = -1
self.startsample = -1
- self.IDLE, self.START, self.ADDRESS, self.DATA = range(4)
- self.state = self.IDLE
+ self.is_repeat_start = 0
+
+ self.FIND_START, self.FIND_ADDRESS, self.FIND_DATA = range(3)
+ self.state = self.FIND_START
# Get the channel/probe number of the SCL/SDA signals.
self.scl_bit = self.probes['scl']['ch']
self.oldscl = None
self.oldsda = None
+ def start(self, metadata):
+ self.unitsize = metadata["unitsize"]
+
def report(self):
pass
+ def is_start_condition(self, scl, sda):
+ """START condition (S): SDA = falling, SCL = high"""
+ if (self.oldsda == 1 and sda == 0) and scl == 1:
+ return True
+ return False
+
+ def is_data_bit(self, scl, sda):
+ """Data sampling of receiver: SCL = rising"""
+ if self.oldscl == 0 and scl == 1:
+ return True
+ return False
+
+ def is_stop_condition(self, scl, sda):
+ """STOP condition (P): SDA = rising, SCL = high"""
+ if (self.oldsda == 0 and sda == 1) and scl == 1:
+ return True
+ return False
+
+ def find_start(self, scl, sda):
+ out = []
+ # o = {'type': 'S', 'range': (self.samplenum, self.samplenum),
+ # 'data': None, 'ann': None},
+ o = (self.is_repeat_start == 1) and 'Sr' or 'S'
+ out.append(o)
+ self.state = self.FIND_ADDRESS
+ self.bitcount = self.databyte = 0
+ self.is_repeat_start = 1
+ self.wr = -1
+ return out
+
+ def find_address_or_data(self, scl, sda):
+ """Gather 8 bits of data plus the ACK/NACK bit."""
+ out = o = []
+
+ if self.startsample == -1:
+ self.startsample = self.samplenum
+ self.bitcount += 1
+
+ # Address and data are transmitted MSB-first.
+ self.databyte <<= 1
+ self.databyte |= sda
+
+ # Return if we haven't collected all 8 + 1 bits, yet.
+ if self.bitcount != 9:
+ return []
+
+ # We received 8 address/data bits and the ACK/NACK bit.
+ self.databyte >>= 1 # Shift out unwanted ACK/NACK bit here.
+
+ ack = (sda == 1) and 'N' or 'A'
+
+ if self.state == self.FIND_ADDRESS:
+ d = self.databyte & 0xfe
+ # The READ/WRITE bit is only in address bytes, not data bytes.
+ self.wr = (self.databyte & 1) and 1 or 0
+ elif self.state == self.FIND_DATA:
+ d = self.databyte
+ else:
+ # TODO: Error?
+ pass
+
+ # o = {'type': self.state,
+ # 'range': (self.startsample, self.samplenum - 1),
+ # 'data': d, 'ann': None}
+
+ o = {'data': '0x%02x' % d}
+
+ # TODO: Simplify.
+ if self.state == self.FIND_ADDRESS and self.wr == 1:
+ o['type'] = 'AW'
+ elif self.state == self.FIND_ADDRESS and self.wr == 0:
+ o['type'] = 'AR'
+ elif self.state == self.FIND_DATA and self.wr == 1:
+ o['type'] = 'DW'
+ elif self.state == self.FIND_DATA and self.wr == 0:
+ o['type'] = 'DR'
+
+ out.append(o)
+
+ # o = {'type': ack, 'range': (self.samplenum, self.samplenum),
+ # 'data': None, 'ann': None}
+ o = ack
+ out.append(o)
+ self.bitcount = self.databyte = 0
+ self.startsample = -1
+
+ if self.state == self.FIND_ADDRESS:
+ self.state = self.FIND_DATA
+ elif self.state == self.FIND_DATA:
+ # There could be multiple data bytes in a row.
+ # So, either find a STOP condition or another data byte next.
+ pass
+
+ return out
+
+ def find_stop(self, scl, sda):
+ out = o = []
+
+ # o = {'type': 'P', 'range': (self.samplenum, self.samplenum),
+ # 'data': None, 'ann': None},
+ o = 'P'
+ out.append(o)
+ self.state = self.FIND_START
+ self.is_repeat_start = 0
+ self.wr = -1
+
+ return out
+
def decode(self, data):
"""I2C protocol decoder"""
o = ack = d = ''
# We should accept a list of samples and iterate...
- for sample in sampleiter(data["data"], self.unitsize):
+ for sample in sampleiter(data['data'], self.unitsize):
# TODO: Eliminate the need for ord().
s = ord(sample.data)
# TODO: Wait until the bus is idle (SDA = SCL = 1) first?
- # START condition (S): SDA = falling, SCL = high
- if (self.oldsda == 1 and sda == 0) and scl == 1:
- o = {'type': 'S', 'range': (self.samplenum, self.samplenum),
- 'data': None, 'ann': None},
- out.append(o)
- self.state = self.ADDRESS
- self.bitcount = self.databyte = 0
-
- # Data latching by transmitter: SCL = low
- elif (scl == 0):
- pass # TODO
-
- # Data sampling of receiver: SCL = rising
- elif (self.oldscl == 0 and scl == 1):
- if self.startsample == -1:
- self.startsample = self.samplenum
- self.bitcount += 1
-
- # out.append("%d\t\tRECEIVED BIT %d: %d\n" % \
- # (self.samplenum, 8 - bitcount, sda))
-
- # Address and data are transmitted MSB-first.
- self.databyte <<= 1
- self.databyte |= sda
-
- if self.bitcount != 9:
- continue
-
- # We received 8 address/data bits and the ACK/NACK bit.
- self.databyte >>= 1 # Shift out unwanted ACK/NACK bit here.
- ack = (sda == 1) and 'N' or 'A'
- d = (self.state == self.ADDRESS) and (self.databyte & 0xfe) or self.databyte
- if self.state == self.ADDRESS:
- self.wr = (self.databyte & 1) and 1 or 0
- self.state = self.DATA
- o = {'type': self.state,
- 'range': (self.startsample, self.samplenum - 1),
- 'data': d, 'ann': None}
- if self.state == self.ADDRESS and self.wr == 1:
- o['type'] = 'AW'
- elif self.state == self.ADDRESS and self.wr == 0:
- o['type'] = 'AR'
- elif self.state == self.DATA and self.wr == 1:
- o['type'] = 'DW'
- elif self.state == self.DATA and self.wr == 0:
- o['type'] = 'DR'
- out.append(o)
- o = {'type': ack, 'range': (self.samplenum, self.samplenum),
- 'data': None, 'ann': None}
- out.append(o)
- self.bitcount = self.databyte = self.startsample = 0
- self.startsample = -1
-
- # STOP condition (P): SDA = rising, SCL = high
- elif (self.oldsda == 0 and sda == 1) and scl == 1:
- o = {'type': 'P', 'range': (self.samplenum, self.samplenum),
- 'data': None, 'ann': None},
- out.append(o)
- self.state = self.IDLE
- self.wr = -1
+ # State machine.
+ if self.state == self.FIND_START:
+ if self.is_start_condition(scl, sda):
+ out += self.find_start(scl, sda)
+ elif self.state == self.FIND_ADDRESS:
+ if self.is_data_bit(scl, sda):
+ out += self.find_address_or_data(scl, sda)
+ elif self.state == self.FIND_DATA:
+ if self.is_data_bit(scl, sda):
+ out += self.find_address_or_data(scl, sda)
+ elif self.is_start_condition(scl, sda):
+ out += self.find_start(scl, sda)
+ elif self.is_stop_condition(scl, sda):
+ out += self.find_stop(scl, sda)
+ else:
+ # TODO: Error?
+ pass
# Save current SDA/SCL values for the next round.
self.oldscl = scl
self.oldsda = sda
- # TODO: Which output format?
- # TODO: How to only output something after the last chunk of data?
if out != []:
sigrok.put(out)
-# Use psyco (if available) as it results in huge performance improvements.
-try:
- import psyco
- psyco.bind(decode)
-except ImportError:
- pass
-
import sigrok