[libsigrokdecode.git] / decoders / rtc8564 / pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

import sigrokdecode as srd
from srdhelper import bcd2int

def reg_list():
    l = []
    for i in range(8 + 1):
        l.append(('reg-0x%02x' % i, 'Register 0x%02x' % i))

    return tuple(l)

class Decoder(srd.Decoder):
    api_version = 2
    id = 'rtc8564'
    name = 'RTC-8564'
    longname = 'Epson RTC-8564 JE/NB'
    desc = 'Realtime clock module protocol.'
    license = 'gplv2+'
    inputs = ['i2c']
    outputs = ['rtc8564']
    annotations = reg_list() + (
        ('read', 'Read date/time'),
        ('write', 'Write date/time'),
        ('bit-reserved', 'Reserved bit'),
        ('bit-vl', 'VL bit'),
        ('bit-century', 'Century bit'),
        ('reg-read', 'Register read'),
        ('reg-write', 'Register write'),
    )
    annotation_rows = (
        ('bits', 'Bits', tuple(range(0, 8 + 1)) + (11, 12, 13)),
        ('regs', 'Register access', (14, 15)),
        ('date-time', 'Date/time', (9, 10)),
    )

    def __init__(self):
        self.state = 'IDLE'
        self.hours = -1
        self.minutes = -1
        self.seconds = -1
        self.days = -1
        self.weekdays = -1
        self.months = -1
        self.years = -1
        self.bits = []

    def start(self):
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def putx(self, data):
        self.put(self.ss, self.es, self.out_ann, data)

    def putd(self, bit1, bit2, data):
        self.put(self.bits[bit1][1], self.bits[bit2][2], self.out_ann, data)

    def putr(self, bit):
        self.put(self.bits[bit][1], self.bits[bit][2], self.out_ann,
                 [11, ['Reserved bit', 'Reserved', 'Rsvd', 'R']])

    def handle_reg_0x00(self, b): # Control register 1
        pass

    def handle_reg_0x01(self, b): # Control register 2
        ti_tp = 1 if (b & (1 << 4)) else 0
        af = 1 if (b & (1 << 3)) else 0
        tf = 1 if (b & (1 << 2)) else 0
        aie = 1 if (b & (1 << 1)) else 0
        tie = 1 if (b & (1 << 0)) else 0

        ann = ''

        s = 'repeated' if ti_tp else 'single-shot'
        ann += 'TI/TP = %d: %s operation upon fixed-cycle timer interrupt '\
               'events\n' % (ti_tp, s)
        s = '' if af else 'no '
        ann += 'AF = %d: %salarm interrupt detected\n' % (af, s)
        s = '' if tf else 'no '
        ann += 'TF = %d: %sfixed-cycle timer interrupt detected\n' % (tf, s)
        s = 'enabled' if aie else 'prohibited'
        ann += 'AIE = %d: INT# pin output %s when an alarm interrupt '\
               'occurs\n' % (aie, s)
        s = 'enabled' if tie else 'prohibited'
        ann += 'TIE = %d: INT# pin output %s when a fixed-cycle interrupt '\
               'event occurs\n' % (tie, s)

        self.putx([1, [ann]])

    def handle_reg_0x02(self, b): # Seconds / Voltage-low bit
        vl = 1 if (b & (1 << 7)) else 0
        self.putd(7, 7, [12, ['Voltage low: %d' % vl, 'Volt. low: %d' % vl,
                        'VL: %d' % vl, 'VL']])
        s = self.seconds = bcd2int(b & 0x7f)
        self.putd(6, 0, [2, ['Second: %d' % s, 'Sec: %d' % s, 'S: %d' % s, 'S']])

    def handle_reg_0x03(self, b): # Minutes
        self.putr(7)
        m = self.minutes = bcd2int(b & 0x7f)
        self.putd(6, 0, [3, ['Minute: %d' % m, 'Min: %d' % m, 'M: %d' % m, 'M']])

    def handle_reg_0x04(self, b): # Hours
        self.putr(7)
        self.putr(6)
        h = self.hours = bcd2int(b & 0x3f)
        self.putd(5, 0, [4, ['Hour: %d' % h, 'H: %d' % h, 'H']])

    def handle_reg_0x05(self, b): # Days
        self.putr(7)
        self.putr(6)
        d = self.days = bcd2int(b & 0x3f)
        self.putd(5, 0, [5, ['Day: %d' % d, 'D: %d' % d, 'D']])

    def handle_reg_0x06(self, b): # Weekdays
        for i in (7, 6, 5, 4, 3):
            self.putr(i)
        w = self.weekdays = bcd2int(b & 0x07)
        self.putd(2, 0, [6, ['Weekday: %d' % w, 'WD: %d' % w, 'WD', 'W']])

    def handle_reg_0x07(self, b): # Months / century bit
        c = 1 if (b & (1 << 7)) else 0
        self.putd(7, 7, [13, ['Century bit: %d' % c, 'Century: %d' % c,
                              'Cent: %d' % c, 'C: %d' % c, 'C']])
        self.putr(6)
        self.putr(5)
        m = self.months = bcd2int(b & 0x1f)
        self.putd(4, 0, [7, ['Month: %d' % m, 'Mon: %d' % m, 'M: %d' % m, 'M']])

    def handle_reg_0x08(self, b): # Years
        y = self.years = bcd2int(b & 0xff)
        self.putx([8, ['Year: %d' % y, 'Y: %d' % y, 'Y']])

    def handle_reg_0x09(self, b): # Alarm, minute
        pass

    def handle_reg_0x0a(self, b): # Alarm, hour
        pass

    def handle_reg_0x0b(self, b): # Alarm, day
        pass

    def handle_reg_0x0c(self, b): # Alarm, weekday
        pass

    def handle_reg_0x0d(self, b): # CLKOUT output
        pass

    def handle_reg_0x0e(self, b): # Timer setting
        pass

    def handle_reg_0x0f(self, b): # Down counter for fixed-cycle timer
        pass

    def decode(self, ss, es, data):
        cmd, databyte = data

        # Collect the 'BITS' packet, then return. The next packet is
        # guaranteed to belong to these bits we just stored.
        if cmd == 'BITS':
            self.bits = databyte
            return

        # Store the start/end samples of this I²C packet.
        self.ss, self.es = ss, es

        # State machine.
        if self.state == 'IDLE':
            # Wait for an I²C START condition.
            if cmd != 'START':
                return
            self.state = 'GET SLAVE ADDR'
            self.ss_block = ss
        elif self.state == 'GET SLAVE ADDR':
            # Wait for an address write operation.
            # TODO: We should only handle packets to the RTC slave (0xa2/0xa3).
            if cmd != 'ADDRESS WRITE':
                return
            self.state = 'GET REG ADDR'
        elif self.state == 'GET REG ADDR':
            # Wait for a data write (master selects the slave register).
            if cmd != 'DATA WRITE':
                return
            self.reg = databyte
            self.state = 'WRITE RTC REGS'
        elif self.state == 'WRITE RTC REGS':
            # If we see a Repeated Start here, it's probably an RTC read.
            if cmd == 'START REPEAT':
                self.state = 'READ RTC REGS'
                return
            # Otherwise: Get data bytes until a STOP condition occurs.
            if cmd == 'DATA WRITE':
                r, s = self.reg, '%02X: %02X' % (self.reg, databyte)
                self.putx([15, ['Write register %s' % s, 'Write reg %s' % s,
                                'WR %s' % s, 'WR', 'W']])
                handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
                handle_reg(databyte)
                self.reg += 1
                # TODO: Check for NACK!
            elif cmd == 'STOP':
                # TODO: Handle read/write of only parts of these items.
                d = '%02d.%02d.%02d %02d:%02d:%02d' % (self.days, self.months,
                    self.years, self.hours, self.minutes, self.seconds)
                self.put(self.ss_block, es, self.out_ann,
                         [9, ['Write date/time: %s' % d, 'Write: %s' % d,
                              'W: %s' % d]])
                self.state = 'IDLE'
            else:
                pass # TODO
        elif self.state == 'READ RTC REGS':
            # Wait for an address read operation.
            # TODO: We should only handle packets to the RTC slave (0xa2/0xa3).
            if cmd == 'ADDRESS READ':
                self.state = 'READ RTC REGS2'
                return
            else:
                pass # TODO
        elif self.state == 'READ RTC REGS2':
            if cmd == 'DATA READ':
                r, s = self.reg, '%02X: %02X' % (self.reg, databyte)
                self.putx([15, ['Read register %s' % s, 'Read reg %s' % s,
                                'RR %s' % s, 'RR', 'R']])
                handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
                handle_reg(databyte)
                self.reg += 1
                # TODO: Check for NACK!
            elif cmd == 'STOP':
                d = '%02d.%02d.%02d %02d:%02d:%02d' % (self.days, self.months,
                    self.years, self.hours, self.minutes, self.seconds)
                self.put(self.ss_block, es, self.out_ann,
                         [10, ['Read date/time: %s' % d, 'Read: %s' % d,
                               'R: %s' % d]])
                self.state = 'IDLE'
            else:
                pass # TODO?
Commit	Line	Data
	1	##
	2	## This file is part of the libsigrokdecode project.
	3	##
	4	## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	import sigrokdecode as srd
	22	from srdhelper import bcd2int
	23
	24	def reg_list():
	25	l = []
	26	for i in range(8 + 1):
	27	l.append(('reg-0x%02x' % i, 'Register 0x%02x' % i))
	28
	29	return tuple(l)
	30
	31	class Decoder(srd.Decoder):
	32	api_version = 2
	33	id = 'rtc8564'
	34	name = 'RTC-8564'
	35	longname = 'Epson RTC-8564 JE/NB'
	36	desc = 'Realtime clock module protocol.'
	37	license = 'gplv2+'
	38	inputs = ['i2c']
	39	outputs = ['rtc8564']
	40	annotations = reg_list() + (
	41	('read', 'Read date/time'),
	42	('write', 'Write date/time'),
	43	('bit-reserved', 'Reserved bit'),
	44	('bit-vl', 'VL bit'),
	45	('bit-century', 'Century bit'),
	46	('reg-read', 'Register read'),
	47	('reg-write', 'Register write'),
	48	)
	49	annotation_rows = (
	50	('bits', 'Bits', tuple(range(0, 8 + 1)) + (11, 12, 13)),
	51	('regs', 'Register access', (14, 15)),
	52	('date-time', 'Date/time', (9, 10)),
	53	)
	54
	55	def __init__(self):
	56	self.state = 'IDLE'
	57	self.hours = -1
	58	self.minutes = -1
	59	self.seconds = -1
	60	self.days = -1
	61	self.weekdays = -1
	62	self.months = -1
	63	self.years = -1
	64	self.bits = []
	65
	66	def start(self):
	67	self.out_ann = self.register(srd.OUTPUT_ANN)
	68
	69	def putx(self, data):
	70	self.put(self.ss, self.es, self.out_ann, data)
	71
	72	def putd(self, bit1, bit2, data):
	73	self.put(self.bits[bit1][1], self.bits[bit2][2], self.out_ann, data)
	74
	75	def putr(self, bit):
	76	self.put(self.bits[bit][1], self.bits[bit][2], self.out_ann,
	77	[11, ['Reserved bit', 'Reserved', 'Rsvd', 'R']])
	78
	79	def handle_reg_0x00(self, b): # Control register 1
	80	pass
	81
	82	def handle_reg_0x01(self, b): # Control register 2
	83	ti_tp = 1 if (b & (1 << 4)) else 0
	84	af = 1 if (b & (1 << 3)) else 0
	85	tf = 1 if (b & (1 << 2)) else 0
	86	aie = 1 if (b & (1 << 1)) else 0
	87	tie = 1 if (b & (1 << 0)) else 0
	88
	89	ann = ''
	90
	91	s = 'repeated' if ti_tp else 'single-shot'
	92	ann += 'TI/TP = %d: %s operation upon fixed-cycle timer interrupt '\
	93	'events\n' % (ti_tp, s)
	94	s = '' if af else 'no '
	95	ann += 'AF = %d: %salarm interrupt detected\n' % (af, s)
	96	s = '' if tf else 'no '
	97	ann += 'TF = %d: %sfixed-cycle timer interrupt detected\n' % (tf, s)
	98	s = 'enabled' if aie else 'prohibited'
	99	ann += 'AIE = %d: INT# pin output %s when an alarm interrupt '\
	100	'occurs\n' % (aie, s)
	101	s = 'enabled' if tie else 'prohibited'
	102	ann += 'TIE = %d: INT# pin output %s when a fixed-cycle interrupt '\
	103	'event occurs\n' % (tie, s)
	104
	105	self.putx([1, [ann]])
	106
	107	def handle_reg_0x02(self, b): # Seconds / Voltage-low bit
	108	vl = 1 if (b & (1 << 7)) else 0
	109	self.putd(7, 7, [12, ['Voltage low: %d' % vl, 'Volt. low: %d' % vl,
	110	'VL: %d' % vl, 'VL']])
	111	s = self.seconds = bcd2int(b & 0x7f)
	112	self.putd(6, 0, [2, ['Second: %d' % s, 'Sec: %d' % s, 'S: %d' % s, 'S']])
	113
	114	def handle_reg_0x03(self, b): # Minutes
	115	self.putr(7)
	116	m = self.minutes = bcd2int(b & 0x7f)
	117	self.putd(6, 0, [3, ['Minute: %d' % m, 'Min: %d' % m, 'M: %d' % m, 'M']])
	118
	119	def handle_reg_0x04(self, b): # Hours
	120	self.putr(7)
	121	self.putr(6)
	122	h = self.hours = bcd2int(b & 0x3f)
	123	self.putd(5, 0, [4, ['Hour: %d' % h, 'H: %d' % h, 'H']])
	124
	125	def handle_reg_0x05(self, b): # Days
	126	self.putr(7)
	127	self.putr(6)
	128	d = self.days = bcd2int(b & 0x3f)
	129	self.putd(5, 0, [5, ['Day: %d' % d, 'D: %d' % d, 'D']])
	130
	131	def handle_reg_0x06(self, b): # Weekdays
	132	for i in (7, 6, 5, 4, 3):
	133	self.putr(i)
	134	w = self.weekdays = bcd2int(b & 0x07)
	135	self.putd(2, 0, [6, ['Weekday: %d' % w, 'WD: %d' % w, 'WD', 'W']])
	136
	137	def handle_reg_0x07(self, b): # Months / century bit
	138	c = 1 if (b & (1 << 7)) else 0
	139	self.putd(7, 7, [13, ['Century bit: %d' % c, 'Century: %d' % c,
	140	'Cent: %d' % c, 'C: %d' % c, 'C']])
	141	self.putr(6)
	142	self.putr(5)
	143	m = self.months = bcd2int(b & 0x1f)
	144	self.putd(4, 0, [7, ['Month: %d' % m, 'Mon: %d' % m, 'M: %d' % m, 'M']])
	145
	146	def handle_reg_0x08(self, b): # Years
	147	y = self.years = bcd2int(b & 0xff)
	148	self.putx([8, ['Year: %d' % y, 'Y: %d' % y, 'Y']])
	149
	150	def handle_reg_0x09(self, b): # Alarm, minute
	151	pass
	152
	153	def handle_reg_0x0a(self, b): # Alarm, hour
	154	pass
	155
	156	def handle_reg_0x0b(self, b): # Alarm, day
	157	pass
	158
	159	def handle_reg_0x0c(self, b): # Alarm, weekday
	160	pass
	161
	162	def handle_reg_0x0d(self, b): # CLKOUT output
	163	pass
	164
	165	def handle_reg_0x0e(self, b): # Timer setting
	166	pass
	167
	168	def handle_reg_0x0f(self, b): # Down counter for fixed-cycle timer
	169	pass
	170
	171	def decode(self, ss, es, data):
	172	cmd, databyte = data
	173
	174	# Collect the 'BITS' packet, then return. The next packet is
	175	# guaranteed to belong to these bits we just stored.
	176	if cmd == 'BITS':
	177	self.bits = databyte
	178	return
	179
	180	# Store the start/end samples of this I²C packet.
	181	self.ss, self.es = ss, es
	182
	183	# State machine.
	184	if self.state == 'IDLE':
	185	# Wait for an I²C START condition.
	186	if cmd != 'START':
	187	return
	188	self.state = 'GET SLAVE ADDR'
	189	self.ss_block = ss
	190	elif self.state == 'GET SLAVE ADDR':
	191	# Wait for an address write operation.
	192	# TODO: We should only handle packets to the RTC slave (0xa2/0xa3).
	193	if cmd != 'ADDRESS WRITE':
	194	return
	195	self.state = 'GET REG ADDR'
	196	elif self.state == 'GET REG ADDR':
	197	# Wait for a data write (master selects the slave register).
	198	if cmd != 'DATA WRITE':
	199	return
	200	self.reg = databyte
	201	self.state = 'WRITE RTC REGS'
	202	elif self.state == 'WRITE RTC REGS':
	203	# If we see a Repeated Start here, it's probably an RTC read.
	204	if cmd == 'START REPEAT':
	205	self.state = 'READ RTC REGS'
	206	return
	207	# Otherwise: Get data bytes until a STOP condition occurs.
	208	if cmd == 'DATA WRITE':
	209	r, s = self.reg, '%02X: %02X' % (self.reg, databyte)
	210	self.putx([15, ['Write register %s' % s, 'Write reg %s' % s,
	211	'WR %s' % s, 'WR', 'W']])
	212	handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
	213	handle_reg(databyte)
	214	self.reg += 1
	215	# TODO: Check for NACK!
	216	elif cmd == 'STOP':
	217	# TODO: Handle read/write of only parts of these items.
	218	d = '%02d.%02d.%02d %02d:%02d:%02d' % (self.days, self.months,
	219	self.years, self.hours, self.minutes, self.seconds)
	220	self.put(self.ss_block, es, self.out_ann,
	221	[9, ['Write date/time: %s' % d, 'Write: %s' % d,
	222	'W: %s' % d]])
	223	self.state = 'IDLE'
	224	else:
	225	pass # TODO
	226	elif self.state == 'READ RTC REGS':
	227	# Wait for an address read operation.
	228	# TODO: We should only handle packets to the RTC slave (0xa2/0xa3).
	229	if cmd == 'ADDRESS READ':
	230	self.state = 'READ RTC REGS2'
	231	return
	232	else:
	233	pass # TODO
	234	elif self.state == 'READ RTC REGS2':
	235	if cmd == 'DATA READ':
	236	r, s = self.reg, '%02X: %02X' % (self.reg, databyte)
	237	self.putx([15, ['Read register %s' % s, 'Read reg %s' % s,
	238	'RR %s' % s, 'RR', 'R']])
	239	handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
	240	handle_reg(databyte)
	241	self.reg += 1
	242	# TODO: Check for NACK!
	243	elif cmd == 'STOP':
	244	d = '%02d.%02d.%02d %02d:%02d:%02d' % (self.days, self.months,
	245	self.years, self.hours, self.minutes, self.seconds)
	246	self.put(self.ss_block, es, self.out_ann,
	247	[10, ['Read date/time: %s' % d, 'Read: %s' % d,
	248	'R: %s' % d]])
	249	self.state = 'IDLE'
	250	else:
	251	pass # TODO?