[libsigrokdecode.git] / decoders / mx25lxx05d / pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2011-2014 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

import sigrokdecode as srd

# Dict which maps command IDs to their names and descriptions.
cmds = {
    0x06: ('WREN', 'Write enable'),
    0x04: ('WRDI', 'Write disable'),
    0x9f: ('RDID', 'Read identification'),
    0x05: ('RDSR', 'Read status register'),
    0x01: ('WRSR', 'Write status register'),
    0x03: ('READ', 'Read data'),
    0x0b: ('FAST/READ', 'Fast read data'),
    0xbb: ('2READ', '2x I/O read'),
    0x20: ('SE', 'Sector erase'),
    0xd8: ('BE', 'Block erase'),
    0x60: ('CE', 'Chip erase'),
    0xc7: ('CE2', 'Chip erase'), # Alternative command ID
    0x02: ('PP', 'Page program'),
    0xad: ('CP', 'Continuously program mode'),
    0xb9: ('DP', 'Deep power down'),
    0xab: ('RDP/RES', 'Release from deep powerdown / Read electronic ID'),
    0x90: ('REMS', 'Read electronic manufacturer & device ID'),
    0xef: ('REMS2', 'Read ID for 2x I/O mode'),
    0xb1: ('ENSO', 'Enter secured OTP'),
    0xc1: ('EXSO', 'Exit secured OTP'),
    0x2b: ('RDSCUR', 'Read security register'),
    0x2f: ('WRSCUR', 'Write security register'),
    0x70: ('ESRY', 'Enable SO to output RY/BY#'),
    0x80: ('DSRY', 'Disable SO to output RY/BY#'),
}

device_name = {
    0x14: 'MX25L1605D',
    0x15: 'MX25L3205D',
    0x16: 'MX25L6405D',
}

def cmd_annotation_classes():
    return tuple([tuple([cmd[0].lower(), cmd[1]]) for cmd in cmds.values()])

def decode_status_reg(data):
    # TODO: Additional per-bit(s) self.put() calls with correct start/end.

    # Bits[0:0]: WIP (write in progress)
    s = 'W' if (data & (1 << 0)) else 'No w'
    ret = '%srite operation in progress.\n' % s

    # Bits[1:1]: WEL (write enable latch)
    s = '' if (data & (1 << 1)) else 'not '
    ret += 'Internal write enable latch is %sset.\n' % s

    # Bits[5:2]: Block protect bits
    # TODO: More detailed decoding (chip-dependent).
    ret += 'Block protection bits (BP3-BP0): 0x%x.\n' % ((data & 0x3c) >> 2)

    # Bits[6:6]: Continuously program mode (CP mode)
    s = '' if (data & (1 << 6)) else 'not '
    ret += 'Device is %sin continuously program mode (CP mode).\n' % s

    # Bits[7:7]: SRWD (status register write disable)
    s = 'not ' if (data & (1 << 7)) else ''
    ret += 'Status register writes are %sallowed.\n' % s

    return ret

class Decoder(srd.Decoder):
    api_version = 2
    id = 'mx25lxx05d'
    name = 'MX25Lxx05D'
    longname = 'Macronix MX25Lxx05D'
    desc = 'SPI (NOR) flash chip protocol.'
    license = 'gplv2+'
    inputs = ['logic']
    outputs = ['mx25lxx05d']
    annotations = cmd_annotation_classes() + (
        ('bits', 'Bits'),
        ('bits2', 'Bits2'),
        ('warnings', 'Warnings'),
    )
    annotation_rows = (
        ('bits', 'Bits', (24, 25)),
        ('commands', 'Commands', tuple(range(23 + 1))),
        ('warnings', 'Warnings', (26,)),
    )

    def __init__(self, **kwargs):
        self.state = None
        self.cmdstate = 1
        self.addr = 0
        self.data = []

    def start(self):
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def putx(self, data):
        # Simplification, most annotations span exactly one SPI byte/packet.
        self.put(self.ss, self.es, self.out_ann, data)

    def handle_wren(self, mosi, miso):
        self.putx([0, ['Command: %s' % cmds[self.state][1]]])
        self.state = None

    def handle_wrdi(self, mosi, miso):
        pass # TODO

    # TODO: Check/display device ID / name
    def handle_rdid(self, mosi, miso):
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.start_sample = self.ss
            self.putx([2, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate == 2:
            # Byte 2: Slave sends the JEDEC manufacturer ID.
            self.putx([2, ['Manufacturer ID: 0x%02x' % miso]])
        elif self.cmdstate == 3:
            # Byte 3: Slave sends the memory type (0x20 for this chip).
            self.putx([2, ['Memory type: 0x%02x' % miso]])
        elif self.cmdstate == 4:
            # Byte 4: Slave sends the device ID.
            self.device_id = miso
            self.putx([2, ['Device ID: 0x%02x' % miso]])

        if self.cmdstate == 4:
            # TODO: Check self.device_id is valid & exists in device_names.
            # TODO: Same device ID? Check!
            d = 'Device: Macronix %s' % device_name[self.device_id]
            self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
            self.state = None
        else:
            self.cmdstate += 1

    def handle_rdsr(self, mosi, miso):
        # Read status register: Master asserts CS#, sends RDSR command,
        # reads status register byte. If CS# is kept asserted, the status
        # register can be read continuously / multiple times in a row.
        # When done, the master de-asserts CS# again.
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.putx([3, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate >= 2:
            # Bytes 2-x: Slave sends status register as long as master clocks.
            if self.cmdstate <= 3: # TODO: While CS# asserted.
                self.putx([24, ['Status register: 0x%02x' % miso]])
                self.putx([25, [decode_status_reg(miso)]])

            if self.cmdstate == 3: # TODO: If CS# got de-asserted.
                self.state = None
                return

        self.cmdstate += 1

    def handle_wrsr(self, mosi, miso):
        pass # TODO

    def handle_read(self, mosi, miso):
        # Read data bytes: Master asserts CS#, sends READ command, sends
        # 3-byte address, reads >= 1 data bytes, de-asserts CS#.
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.putx([5, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate in (2, 3, 4):
            # Bytes 2/3/4: Master sends read address (24bits, MSB-first).
            self.addr |= (mosi << ((4 - self.cmdstate) * 8))
            # self.putx([0, ['Read address, byte %d: 0x%02x' % \
            #                (4 - self.cmdstate, mosi)]])
            if self.cmdstate == 4:
                self.putx([24, ['Read address: 0x%06x' % self.addr]])
                self.addr = 0
        elif self.cmdstate >= 5:
            # Bytes 5-x: Master reads data bytes (until CS# de-asserted).
            # TODO: For now we hardcode 256 bytes per READ command.
            if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
                self.data.append(miso)
                # self.putx([0, ['New read byte: 0x%02x' % miso]])

            if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
                # s = ', '.join(map(hex, self.data))
                s = ''.join(map(chr, self.data))
                self.putx([24, ['Read data']])
                self.putx([25, ['Read data: %s' % s]])
                self.data = []
                self.state = None
                return

        self.cmdstate += 1

    def handle_fast_read(self, mosi, miso):
        pass # TODO

    def handle_2read(self, mosi, miso):
        pass # TODO

    # TODO: Warn/abort if we don't see the necessary amount of bytes.
    # TODO: Warn if WREN was not seen before.
    def handle_se(self, mosi, miso):
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.addr = 0
            self.start_sample = self.ss
            self.putx([8, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate in (2, 3, 4):
            # Bytes 2/3/4: Master sends sectror address (24bits, MSB-first).
            self.addr |= (mosi << ((4 - self.cmdstate) * 8))
            # self.putx([0, ['Sector address, byte %d: 0x%02x' % \
            #                (4 - self.cmdstate, mosi)]])

        if self.cmdstate == 4:
            d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
            self.put(self.start_sample, self.es, self.out_ann, [24, [d]])
            # TODO: Max. size depends on chip, check that too if possible.
            if self.addr % 4096 != 0:
                # Sector addresses must be 4K-aligned (same for all 3 chips).
                d = 'Warning: Invalid sector address!'
                self.put(self.start_sample, self.es, self.out_ann, [101, [d]])
            self.state = None
        else:
            self.cmdstate += 1

    def handle_be(self, mosi, miso):
        pass # TODO

    def handle_ce(self, mosi, miso):
        pass # TODO

    def handle_ce2(self, mosi, miso):
        pass # TODO

    def handle_pp(self, mosi, miso):
        # Page program: Master asserts CS#, sends PP command, sends 3-byte
        # page address, sends >= 1 data bytes, de-asserts CS#.
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.putx([12, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate in (2, 3, 4):
            # Bytes 2/3/4: Master sends page address (24bits, MSB-first).
            self.addr |= (mosi << ((4 - self.cmdstate) * 8))
            # self.putx([0, ['Page address, byte %d: 0x%02x' % \
            #                (4 - self.cmdstate, mosi)]])
            if self.cmdstate == 4:
                self.putx([24, ['Page address: 0x%06x' % self.addr]])
                self.addr = 0
        elif self.cmdstate >= 5:
            # Bytes 5-x: Master sends data bytes (until CS# de-asserted).
            # TODO: For now we hardcode 256 bytes per page / PP command.
            if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
                self.data.append(mosi)
                # self.putx([0, ['New data byte: 0x%02x' % mosi]])

            if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
                # s = ', '.join(map(hex, self.data))
                s = ''.join(map(chr, self.data))
                self.putx([24, ['Page data']])
                self.putx([25, ['Page data: %s' % s]])
                self.data = []
                self.state = None
                return

        self.cmdstate += 1

    def handle_cp(self, mosi, miso):
        pass # TODO

    def handle_dp(self, mosi, miso):
        pass # TODO

    def handle_rdp_res(self, mosi, miso):
        pass # TODO

    def handle_rems(self, mosi, miso):
        if self.cmdstate == 1:
            # Byte 1: Master sends command ID.
            self.start_sample = self.ss
            self.putx([16, ['Command: %s' % cmds[self.state][1]]])
        elif self.cmdstate in (2, 3):
            # Bytes 2/3: Master sends two dummy bytes.
            # TODO: Check dummy bytes? Check reply from device?
            self.putx([24, ['Dummy byte: %s' % mosi]])
        elif self.cmdstate == 4:
            # Byte 4: Master sends 0x00 or 0x01.
            # 0x00: Master wants manufacturer ID as first reply byte.
            # 0x01: Master wants device ID as first reply byte.
            self.manufacturer_id_first = True if (mosi == 0x00) else False
            d = 'manufacturer' if (mosi == 0x00) else 'device'
            self.putx([24, ['Master wants %s ID first' % d]])
        elif self.cmdstate == 5:
            # Byte 5: Slave sends manufacturer ID (or device ID).
            self.ids = [miso]
            d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
            self.putx([24, ['%s ID' % d]])
        elif self.cmdstate == 6:
            # Byte 6: Slave sends device ID (or manufacturer ID).
            self.ids.append(miso)
            d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
            self.putx([24, ['%s ID' % d]])

        if self.cmdstate == 6:
            self.end_sample = self.es
            id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
            self.putx([24, ['Device: Macronix %s' % device_name[id]]])
            self.state = None
        else:
            self.cmdstate += 1

    def handle_rems2(self, mosi, miso):
        pass # TODO

    def handle_enso(self, mosi, miso):
        pass # TODO

    def handle_exso(self, mosi, miso):
        pass # TODO

    def handle_rdscur(self, mosi, miso):
        pass # TODO

    def handle_wrscur(self, mosi, miso):
        pass # TODO

    def handle_esry(self, mosi, miso):
        pass # TODO

    def handle_dsry(self, mosi, miso):
        pass # TODO

    def decode(self, ss, es, data):

        ptype, mosi, miso = data

        # if ptype == 'DATA':
        #     self.putx([0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])

        # if ptype == 'CS-CHANGE':
        #     if mosi == 1 and miso == 0:
        #         self.putx([0, ['Asserting CS#']])
        #     elif mosi == 0 and miso == 1:
        #         self.putx([0, ['De-asserting CS#']])

        if ptype != 'DATA':
            return

        self.ss, self.es = ss, es

        # If we encountered a known chip command, enter the resp. state.
        if self.state is None:
            self.state = mosi
            self.cmdstate = 1

        # Handle commands.
        if self.state in cmds:
            s = 'handle_%s' % cmds[self.state][0].lower().replace('/', '_')
            handle_reg = getattr(self, s)
            handle_reg(mosi, miso)
        else:
            self.putx([24, ['Unknown command: 0x%02x' % mosi]])
            self.state = None
Commit	Line	Data
	1	##
	2	## This file is part of the libsigrokdecode project.
	3	##
	4	## Copyright (C) 2011-2014 Uwe Hermann <uwe@hermann-uwe.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	import sigrokdecode as srd
	22
	23	# Dict which maps command IDs to their names and descriptions.
	24	cmds = {
	25	0x06: ('WREN', 'Write enable'),
	26	0x04: ('WRDI', 'Write disable'),
	27	0x9f: ('RDID', 'Read identification'),
	28	0x05: ('RDSR', 'Read status register'),
	29	0x01: ('WRSR', 'Write status register'),
	30	0x03: ('READ', 'Read data'),
	31	0x0b: ('FAST/READ', 'Fast read data'),
	32	0xbb: ('2READ', '2x I/O read'),
	33	0x20: ('SE', 'Sector erase'),
	34	0xd8: ('BE', 'Block erase'),
	35	0x60: ('CE', 'Chip erase'),
	36	0xc7: ('CE2', 'Chip erase'), # Alternative command ID
	37	0x02: ('PP', 'Page program'),
	38	0xad: ('CP', 'Continuously program mode'),
	39	0xb9: ('DP', 'Deep power down'),
	40	0xab: ('RDP/RES', 'Release from deep powerdown / Read electronic ID'),
	41	0x90: ('REMS', 'Read electronic manufacturer & device ID'),
	42	0xef: ('REMS2', 'Read ID for 2x I/O mode'),
	43	0xb1: ('ENSO', 'Enter secured OTP'),
	44	0xc1: ('EXSO', 'Exit secured OTP'),
	45	0x2b: ('RDSCUR', 'Read security register'),
	46	0x2f: ('WRSCUR', 'Write security register'),
	47	0x70: ('ESRY', 'Enable SO to output RY/BY#'),
	48	0x80: ('DSRY', 'Disable SO to output RY/BY#'),
	49	}
	50
	51	device_name = {
	52	0x14: 'MX25L1605D',
	53	0x15: 'MX25L3205D',
	54	0x16: 'MX25L6405D',
	55	}
	56
	57	def cmd_annotation_classes():
	58	return tuple([tuple([cmd[0].lower(), cmd[1]]) for cmd in cmds.values()])
	59
	60	def decode_status_reg(data):
	61	# TODO: Additional per-bit(s) self.put() calls with correct start/end.
	62
	63	# Bits[0:0]: WIP (write in progress)
	64	s = 'W' if (data & (1 << 0)) else 'No w'
	65	ret = '%srite operation in progress.\n' % s
	66
	67	# Bits[1:1]: WEL (write enable latch)
	68	s = '' if (data & (1 << 1)) else 'not '
	69	ret += 'Internal write enable latch is %sset.\n' % s
	70
	71	# Bits[5:2]: Block protect bits
	72	# TODO: More detailed decoding (chip-dependent).
	73	ret += 'Block protection bits (BP3-BP0): 0x%x.\n' % ((data & 0x3c) >> 2)
	74
	75	# Bits[6:6]: Continuously program mode (CP mode)
	76	s = '' if (data & (1 << 6)) else 'not '
	77	ret += 'Device is %sin continuously program mode (CP mode).\n' % s
	78
	79	# Bits[7:7]: SRWD (status register write disable)
	80	s = 'not ' if (data & (1 << 7)) else ''
	81	ret += 'Status register writes are %sallowed.\n' % s
	82
	83	return ret
	84
	85	class Decoder(srd.Decoder):
	86	api_version = 2
	87	id = 'mx25lxx05d'
	88	name = 'MX25Lxx05D'
	89	longname = 'Macronix MX25Lxx05D'
	90	desc = 'SPI (NOR) flash chip protocol.'
	91	license = 'gplv2+'
	92	inputs = ['logic']
	93	outputs = ['mx25lxx05d']
	94	annotations = cmd_annotation_classes() + (
	95	('bits', 'Bits'),
	96	('bits2', 'Bits2'),
	97	('warnings', 'Warnings'),
	98	)
	99	annotation_rows = (
	100	('bits', 'Bits', (24, 25)),
	101	('commands', 'Commands', tuple(range(23 + 1))),
	102	('warnings', 'Warnings', (26,)),
	103	)
	104
	105	def __init__(self, **kwargs):
	106	self.state = None
	107	self.cmdstate = 1
	108	self.addr = 0
	109	self.data = []
	110
	111	def start(self):
	112	self.out_ann = self.register(srd.OUTPUT_ANN)
	113
	114	def putx(self, data):
	115	# Simplification, most annotations span exactly one SPI byte/packet.
	116	self.put(self.ss, self.es, self.out_ann, data)
	117
	118	def handle_wren(self, mosi, miso):
	119	self.putx([0, ['Command: %s' % cmds[self.state][1]]])
	120	self.state = None
	121
	122	def handle_wrdi(self, mosi, miso):
	123	pass # TODO
	124
	125	# TODO: Check/display device ID / name
	126	def handle_rdid(self, mosi, miso):
	127	if self.cmdstate == 1:
	128	# Byte 1: Master sends command ID.
	129	self.start_sample = self.ss
	130	self.putx([2, ['Command: %s' % cmds[self.state][1]]])
	131	elif self.cmdstate == 2:
	132	# Byte 2: Slave sends the JEDEC manufacturer ID.
	133	self.putx([2, ['Manufacturer ID: 0x%02x' % miso]])
	134	elif self.cmdstate == 3:
	135	# Byte 3: Slave sends the memory type (0x20 for this chip).
	136	self.putx([2, ['Memory type: 0x%02x' % miso]])
	137	elif self.cmdstate == 4:
	138	# Byte 4: Slave sends the device ID.
	139	self.device_id = miso
	140	self.putx([2, ['Device ID: 0x%02x' % miso]])
	141
	142	if self.cmdstate == 4:
	143	# TODO: Check self.device_id is valid & exists in device_names.
	144	# TODO: Same device ID? Check!
	145	d = 'Device: Macronix %s' % device_name[self.device_id]
	146	self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
	147	self.state = None
	148	else:
	149	self.cmdstate += 1
	150
	151	def handle_rdsr(self, mosi, miso):
	152	# Read status register: Master asserts CS#, sends RDSR command,
	153	# reads status register byte. If CS# is kept asserted, the status
	154	# register can be read continuously / multiple times in a row.
	155	# When done, the master de-asserts CS# again.
	156	if self.cmdstate == 1:
	157	# Byte 1: Master sends command ID.
	158	self.putx([3, ['Command: %s' % cmds[self.state][1]]])
	159	elif self.cmdstate >= 2:
	160	# Bytes 2-x: Slave sends status register as long as master clocks.
	161	if self.cmdstate <= 3: # TODO: While CS# asserted.
	162	self.putx([24, ['Status register: 0x%02x' % miso]])
	163	self.putx([25, [decode_status_reg(miso)]])
	164
	165	if self.cmdstate == 3: # TODO: If CS# got de-asserted.
	166	self.state = None
	167	return
	168
	169	self.cmdstate += 1
	170
	171	def handle_wrsr(self, mosi, miso):
	172	pass # TODO
	173
	174	def handle_read(self, mosi, miso):
	175	# Read data bytes: Master asserts CS#, sends READ command, sends
	176	# 3-byte address, reads >= 1 data bytes, de-asserts CS#.
	177	if self.cmdstate == 1:
	178	# Byte 1: Master sends command ID.
	179	self.putx([5, ['Command: %s' % cmds[self.state][1]]])
	180	elif self.cmdstate in (2, 3, 4):
	181	# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
	182	self.addr \|= (mosi << ((4 - self.cmdstate) * 8))
	183	# self.putx([0, ['Read address, byte %d: 0x%02x' % \
	184	# (4 - self.cmdstate, mosi)]])
	185	if self.cmdstate == 4:
	186	self.putx([24, ['Read address: 0x%06x' % self.addr]])
	187	self.addr = 0
	188	elif self.cmdstate >= 5:
	189	# Bytes 5-x: Master reads data bytes (until CS# de-asserted).
	190	# TODO: For now we hardcode 256 bytes per READ command.
	191	if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
	192	self.data.append(miso)
	193	# self.putx([0, ['New read byte: 0x%02x' % miso]])
	194
	195	if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
	196	# s = ', '.join(map(hex, self.data))
	197	s = ''.join(map(chr, self.data))
	198	self.putx([24, ['Read data']])
	199	self.putx([25, ['Read data: %s' % s]])
	200	self.data = []
	201	self.state = None
	202	return
	203
	204	self.cmdstate += 1
	205
	206	def handle_fast_read(self, mosi, miso):
	207	pass # TODO
	208
	209	def handle_2read(self, mosi, miso):
	210	pass # TODO
	211
	212	# TODO: Warn/abort if we don't see the necessary amount of bytes.
	213	# TODO: Warn if WREN was not seen before.
	214	def handle_se(self, mosi, miso):
	215	if self.cmdstate == 1:
	216	# Byte 1: Master sends command ID.
	217	self.addr = 0
	218	self.start_sample = self.ss
	219	self.putx([8, ['Command: %s' % cmds[self.state][1]]])
	220	elif self.cmdstate in (2, 3, 4):
	221	# Bytes 2/3/4: Master sends sectror address (24bits, MSB-first).
	222	self.addr \|= (mosi << ((4 - self.cmdstate) * 8))
	223	# self.putx([0, ['Sector address, byte %d: 0x%02x' % \
	224	# (4 - self.cmdstate, mosi)]])
	225
	226	if self.cmdstate == 4:
	227	d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
	228	self.put(self.start_sample, self.es, self.out_ann, [24, [d]])
	229	# TODO: Max. size depends on chip, check that too if possible.
	230	if self.addr % 4096 != 0:
	231	# Sector addresses must be 4K-aligned (same for all 3 chips).
	232	d = 'Warning: Invalid sector address!'
	233	self.put(self.start_sample, self.es, self.out_ann, [101, [d]])
	234	self.state = None
	235	else:
	236	self.cmdstate += 1
	237
	238	def handle_be(self, mosi, miso):
	239	pass # TODO
	240
	241	def handle_ce(self, mosi, miso):
	242	pass # TODO
	243
	244	def handle_ce2(self, mosi, miso):
	245	pass # TODO
	246
	247	def handle_pp(self, mosi, miso):
	248	# Page program: Master asserts CS#, sends PP command, sends 3-byte
	249	# page address, sends >= 1 data bytes, de-asserts CS#.
	250	if self.cmdstate == 1:
	251	# Byte 1: Master sends command ID.
	252	self.putx([12, ['Command: %s' % cmds[self.state][1]]])
	253	elif self.cmdstate in (2, 3, 4):
	254	# Bytes 2/3/4: Master sends page address (24bits, MSB-first).
	255	self.addr \|= (mosi << ((4 - self.cmdstate) * 8))
	256	# self.putx([0, ['Page address, byte %d: 0x%02x' % \
	257	# (4 - self.cmdstate, mosi)]])
	258	if self.cmdstate == 4:
	259	self.putx([24, ['Page address: 0x%06x' % self.addr]])
	260	self.addr = 0
	261	elif self.cmdstate >= 5:
	262	# Bytes 5-x: Master sends data bytes (until CS# de-asserted).
	263	# TODO: For now we hardcode 256 bytes per page / PP command.
	264	if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
	265	self.data.append(mosi)
	266	# self.putx([0, ['New data byte: 0x%02x' % mosi]])
	267
	268	if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
	269	# s = ', '.join(map(hex, self.data))
	270	s = ''.join(map(chr, self.data))
	271	self.putx([24, ['Page data']])
	272	self.putx([25, ['Page data: %s' % s]])
	273	self.data = []
	274	self.state = None
	275	return
	276
	277	self.cmdstate += 1
	278
	279	def handle_cp(self, mosi, miso):
	280	pass # TODO
	281
	282	def handle_dp(self, mosi, miso):
	283	pass # TODO
	284
	285	def handle_rdp_res(self, mosi, miso):
	286	pass # TODO
	287
	288	def handle_rems(self, mosi, miso):
	289	if self.cmdstate == 1:
	290	# Byte 1: Master sends command ID.
	291	self.start_sample = self.ss
	292	self.putx([16, ['Command: %s' % cmds[self.state][1]]])
	293	elif self.cmdstate in (2, 3):
	294	# Bytes 2/3: Master sends two dummy bytes.
	295	# TODO: Check dummy bytes? Check reply from device?
	296	self.putx([24, ['Dummy byte: %s' % mosi]])
	297	elif self.cmdstate == 4:
	298	# Byte 4: Master sends 0x00 or 0x01.
	299	# 0x00: Master wants manufacturer ID as first reply byte.
	300	# 0x01: Master wants device ID as first reply byte.
	301	self.manufacturer_id_first = True if (mosi == 0x00) else False
	302	d = 'manufacturer' if (mosi == 0x00) else 'device'
	303	self.putx([24, ['Master wants %s ID first' % d]])
	304	elif self.cmdstate == 5:
	305	# Byte 5: Slave sends manufacturer ID (or device ID).
	306	self.ids = [miso]
	307	d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
	308	self.putx([24, ['%s ID' % d]])
	309	elif self.cmdstate == 6:
	310	# Byte 6: Slave sends device ID (or manufacturer ID).
	311	self.ids.append(miso)
	312	d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
	313	self.putx([24, ['%s ID' % d]])
	314
	315	if self.cmdstate == 6:
	316	self.end_sample = self.es
	317	id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
	318	self.putx([24, ['Device: Macronix %s' % device_name[id]]])
	319	self.state = None
	320	else:
	321	self.cmdstate += 1
	322
	323	def handle_rems2(self, mosi, miso):
	324	pass # TODO
	325
	326	def handle_enso(self, mosi, miso):
	327	pass # TODO
	328
	329	def handle_exso(self, mosi, miso):
	330	pass # TODO
	331
	332	def handle_rdscur(self, mosi, miso):
	333	pass # TODO
	334
	335	def handle_wrscur(self, mosi, miso):
	336	pass # TODO
	337
	338	def handle_esry(self, mosi, miso):
	339	pass # TODO
	340
	341	def handle_dsry(self, mosi, miso):
	342	pass # TODO
	343
	344	def decode(self, ss, es, data):
	345
	346	ptype, mosi, miso = data
	347
	348	# if ptype == 'DATA':
	349	# self.putx([0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])
	350
	351	# if ptype == 'CS-CHANGE':
	352	# if mosi == 1 and miso == 0:
	353	# self.putx([0, ['Asserting CS#']])
	354	# elif mosi == 0 and miso == 1:
	355	# self.putx([0, ['De-asserting CS#']])
	356
	357	if ptype != 'DATA':
	358	return
	359
	360	self.ss, self.es = ss, es
	361
	362	# If we encountered a known chip command, enter the resp. state.
	363	if self.state is None:
	364	self.state = mosi
	365	self.cmdstate = 1
	366
	367	# Handle commands.
	368	if self.state in cmds:
	369	s = 'handle_%s' % cmds[self.state][0].lower().replace('/', '_')
	370	handle_reg = getattr(self, s)
	371	handle_reg(mosi, miso)
	372	else:
	373	self.putx([24, ['Unknown command: 0x%02x' % mosi]])
	374	self.state = None