[libsigrokdecode.git] / decoders / avr_isp / pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

# AVR ISP protocol decoder

import sigrokdecode as srd
from .parts import *

VENDOR_CODE_ATMEL = 0x1e

class Decoder(srd.Decoder):
    api_version = 1
    id = 'avr_isp'
    name = 'AVR ISP'
    longname = 'AVR In-System Programming'
    desc = 'Protocol for in-system programming Atmel AVR MCUs.'
    license = 'gplv2+'
    inputs = ['spi', 'logic']
    outputs = ['avr_isp']
    probes = []
    optional_probes = [
        {'id': 'reset', 'name': 'RESET#', 'desc': 'Target AVR MCU reset'},
    ]
    options = {}
    annotations = [
        ['Text', 'Human-readable text'],
        ['Warnings', 'Human-readable warnings'],
    ]

    def __init__(self, **kwargs):
        self.state = 'IDLE'
        self.mosi_bytes, self.miso_bytes = [], []
        self.cmd_ss, self.cmd_es = 0, 0
        self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0

    def start(self):
        # self.out_proto = self.register(srd.OUTPUT_PYTHON)
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def putx(self, data):
        self.put(self.cmd_ss, self.cmd_es, self.out_ann, data)

    def handle_cmd_programming_enable(self, cmd, ret):
        # Programming enable.
        # Note: The chip doesn't send any ACK for 'Programming enable'.
        self.putx([0, ['Programming enable']])

        # Sanity check on reply.
        if ret[1:4] != [0xac, 0x53, cmd[2]]:
            self.putx([1, ['Warning: Unexpected bytes in reply!']])

    def handle_cmd_read_signature_byte_0x00(self, cmd, ret):
        # Signature byte 0x00: vendor code.
        self.vendor_code = ret[3]
        v = vendor_code[self.vendor_code]
        self.putx([0, ['Vendor code: 0x%02x (%s)' % (ret[3], v)]])

        # Store for later.
        self.xx = cmd[1] # Same as ret[2].
        self.yy = cmd[3]
        self.zz = ret[0]

        # Sanity check on reply.
        if ret[1] != 0x30 or ret[2] != cmd[1]:
            self.putx([1, ['Warning: Unexpected bytes in reply!']])

        # Sanity check for the vendor code.
        if self.vendor_code != VENDOR_CODE_ATMEL:
            self.putx([1, ['Warning: Vendor code was not 0x1e (Atmel)!']])

    def handle_cmd_read_signature_byte_0x01(self, cmd, ret):
        # Signature byte 0x01: part family and memory size.
        self.part_fam_flash_size = ret[3]
        self.putx([0, ['Part family / memory size: 0x%02x' % ret[3]]])

        # Store for later.
        self.mm = cmd[3]

        # Sanity check on reply.
        if ret[1] != 0x30 or ret[2] != cmd[1] or ret[0] != self.yy:
            self.putx([1, ['Warning: Unexpected bytes in reply!']])

    def handle_cmd_read_signature_byte_0x02(self, cmd, ret):
        # Signature byte 0x02: part number.
        self.part_number = ret[3]
        self.putx([0, ['Part number: 0x%02x' % ret[3]]])

        # TODO: Fix range.
        p = part[(self.part_fam_flash_size, self.part_number)]
        self.putx([0, ['Device: Atmel %s' % p]])

        # Sanity check on reply.
        if ret[1] != 0x30 or ret[2] != self.xx or ret[0] != self.mm:
            self.putx([1, ['Warning: Unexpected bytes in reply!']])

        self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0

    def handle_cmd_chip_erase(self, cmd, ret):
        # Chip erase (erases both flash an EEPROM).
        # Upon successful chip erase, the lock bits will also be erased.
        # The only way to end a Chip Erase cycle is to release RESET#.
        self.putx([0, ['Chip erase']])

        # TODO: Check/handle RESET#.

        # Sanity check on reply.
        bit = (ret[2] & (1 << 7)) >> 7
        if ret[1] != 0xac or bit != 1 or ret[3] != cmd[2]:
            self.putx([1, ['Warning: Unexpected bytes in reply!']])

    def handle_cmd_read_fuse_bits(self, cmd, ret):
        # Read fuse bits.
        self.putx([0, ['Read fuse bits: 0x%02x' % ret[3]]])

        # TODO: Decode fuse bits.
        # TODO: Sanity check on reply.

    def handle_cmd_read_fuse_high_bits(self, cmd, ret):
        # Read fuse high bits.
        self.putx([0, ['Read fuse high bits: 0x%02x' % ret[3]]])

        # TODO: Decode fuse bits.
        # TODO: Sanity check on reply.

    def handle_cmd_read_extended_fuse_bits(self, cmd, ret):
        # Read extended fuse bits.
        self.putx([0, ['Read extended fuse bits: 0x%02x' % ret[3]]])

        # TODO: Decode fuse bits.
        # TODO: Sanity check on reply.

    def handle_command(self, cmd, ret):
        if cmd[:2] == [0xac, 0x53]:
            self.handle_cmd_programming_enable(cmd, ret)
        elif cmd[0] == 0xac and (cmd[1] & (1 << 7)) == (1 << 7):
            self.handle_cmd_chip_erase(cmd, ret)
        elif cmd[:3] == [0x50, 0x00, 0x00]:
            self.handle_cmd_read_fuse_bits(cmd, ret)
        elif cmd[:3] == [0x58, 0x08, 0x00]:
            self.handle_cmd_read_fuse_high_bits(cmd, ret)
        elif cmd[:3] == [0x50, 0x08, 0x00]:
            self.handle_cmd_read_extended_fuse_bits(cmd, ret)
        elif cmd[0] == 0x30 and cmd[2] == 0x00:
            self.handle_cmd_read_signature_byte_0x00(cmd, ret)
        elif cmd[0] == 0x30 and cmd[2] == 0x01:
            self.handle_cmd_read_signature_byte_0x01(cmd, ret)
        elif cmd[0] == 0x30 and cmd[2] == 0x02:
            self.handle_cmd_read_signature_byte_0x02(cmd, ret)
        else:
            c = '%02x %02x %02x %02x' % tuple(cmd)
            r = '%02x %02x %02x %02x' % tuple(ret)
            self.putx([0, ['Unknown command: %s (reply: %s)!' % (c, r)]])

    def decode(self, ss, es, data):
        ptype, mosi, miso = data

        if ptype != 'DATA':
            return

        # self.put(0, 0, self.out_ann,
        #          [0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])

        self.ss, self.es = ss, es

        # Append new bytes.
        self.mosi_bytes.append(mosi)
        self.miso_bytes.append(miso)

        if len(self.mosi_bytes) == 0:
            self.cmd_ss = ss

        # All commands consist of 4 bytes.
        if len(self.mosi_bytes) < 4:
            return

        self.cmd_es = es

        self.handle_command(self.mosi_bytes, self.miso_bytes)

        self.mosi_bytes = []
        self.miso_bytes = []
Commit	Line	Data
3bd76451	1	##
50bd5d25	2	## This file is part of the libsigrokdecode project.
3bd76451 UH	3	##
	4	## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	# AVR ISP protocol decoder
	22
	23	import sigrokdecode as srd
77adad94	24	from .parts import *
3bd76451 UH	25
	26	VENDOR_CODE_ATMEL = 0x1e
	27
	28	class Decoder(srd.Decoder):
	29	api_version = 1
	30	id = 'avr_isp'
	31	name = 'AVR ISP'
d523eae6	32	longname = 'AVR In-System Programming'
3bd76451 UH	33	desc = 'Protocol for in-system programming Atmel AVR MCUs.'
	34	license = 'gplv2+'
	35	inputs = ['spi', 'logic']
	36	outputs = ['avr_isp']
	37	probes = []
	38	optional_probes = [
	39	{'id': 'reset', 'name': 'RESET#', 'desc': 'Target AVR MCU reset'},
	40	]
	41	options = {}
	42	annotations = [
	43	['Text', 'Human-readable text'],
	44	['Warnings', 'Human-readable warnings'],
	45	]
	46
	47	def __init__(self, **kwargs):
	48	self.state = 'IDLE'
	49	self.mosi_bytes, self.miso_bytes = [], []
	50	self.cmd_ss, self.cmd_es = 0, 0
	51	self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0
	52
8915b346	53	def start(self):
be465111 BV	54	# self.out_proto = self.register(srd.OUTPUT_PYTHON)
be465111 BV	55	self.out_ann = self.register(srd.OUTPUT_ANN)
3bd76451	56
3bd76451 UH	57	def putx(self, data):
	58	self.put(self.cmd_ss, self.cmd_es, self.out_ann, data)
	59
	60	def handle_cmd_programming_enable(self, cmd, ret):
	61	# Programming enable.
	62	# Note: The chip doesn't send any ACK for 'Programming enable'.
	63	self.putx([0, ['Programming enable']])
	64
	65	# Sanity check on reply.
	66	if ret[1:4] != [0xac, 0x53, cmd[2]]:
	67	self.putx([1, ['Warning: Unexpected bytes in reply!']])
	68
	69	def handle_cmd_read_signature_byte_0x00(self, cmd, ret):
	70	# Signature byte 0x00: vendor code.
	71	self.vendor_code = ret[3]
	72	v = vendor_code[self.vendor_code]
	73	self.putx([0, ['Vendor code: 0x%02x (%s)' % (ret[3], v)]])
	74
	75	# Store for later.
	76	self.xx = cmd[1] # Same as ret[2].
	77	self.yy = cmd[3]
	78	self.zz = ret[0]
	79
	80	# Sanity check on reply.
	81	if ret[1] != 0x30 or ret[2] != cmd[1]:
	82	self.putx([1, ['Warning: Unexpected bytes in reply!']])
	83
	84	# Sanity check for the vendor code.
	85	if self.vendor_code != VENDOR_CODE_ATMEL:
	86	self.putx([1, ['Warning: Vendor code was not 0x1e (Atmel)!']])
	87
	88	def handle_cmd_read_signature_byte_0x01(self, cmd, ret):
	89	# Signature byte 0x01: part family and memory size.
	90	self.part_fam_flash_size = ret[3]
	91	self.putx([0, ['Part family / memory size: 0x%02x' % ret[3]]])
	92
	93	# Store for later.
	94	self.mm = cmd[3]
	95
	96	# Sanity check on reply.
	97	if ret[1] != 0x30 or ret[2] != cmd[1] or ret[0] != self.yy:
	98	self.putx([1, ['Warning: Unexpected bytes in reply!']])
	99
	100	def handle_cmd_read_signature_byte_0x02(self, cmd, ret):
	101	# Signature byte 0x02: part number.
	102	self.part_number = ret[3]
	103	self.putx([0, ['Part number: 0x%02x' % ret[3]]])
	104
	105	# TODO: Fix range.
	106	p = part[(self.part_fam_flash_size, self.part_number)]
	107	self.putx([0, ['Device: Atmel %s' % p]])
	108
	109	# Sanity check on reply.
	110	if ret[1] != 0x30 or ret[2] != self.xx or ret[0] != self.mm:
	111	self.putx([1, ['Warning: Unexpected bytes in reply!']])
	112
	113	self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0
	114
	115	def handle_cmd_chip_erase(self, cmd, ret):
1fd698dc UH	116	# Chip erase (erases both flash an EEPROM).
	117	# Upon successful chip erase, the lock bits will also be erased.
	118	# The only way to end a Chip Erase cycle is to release RESET#.
3bd76451 UH	119	self.putx([0, ['Chip erase']])
3bd76451 UH	120
1fd698dc UH	121	# TODO: Check/handle RESET#.
	122
	123	# Sanity check on reply.
	124	bit = (ret[2] & (1 << 7)) >> 7
	125	if ret[1] != 0xac or bit != 1 or ret[3] != cmd[2]:
	126	self.putx([1, ['Warning: Unexpected bytes in reply!']])
	127
3bd76451 UH	128	def handle_cmd_read_fuse_bits(self, cmd, ret):
	129	# Read fuse bits.
	130	self.putx([0, ['Read fuse bits: 0x%02x' % ret[3]]])
	131
	132	# TODO: Decode fuse bits.
	133	# TODO: Sanity check on reply.
	134
	135	def handle_cmd_read_fuse_high_bits(self, cmd, ret):
	136	# Read fuse high bits.
	137	self.putx([0, ['Read fuse high bits: 0x%02x' % ret[3]]])
	138
	139	# TODO: Decode fuse bits.
	140	# TODO: Sanity check on reply.
	141
	142	def handle_cmd_read_extended_fuse_bits(self, cmd, ret):
	143	# Read extended fuse bits.
	144	self.putx([0, ['Read extended fuse bits: 0x%02x' % ret[3]]])
	145
	146	# TODO: Decode fuse bits.
	147	# TODO: Sanity check on reply.
	148
	149	def handle_command(self, cmd, ret):
	150	if cmd[:2] == [0xac, 0x53]:
	151	self.handle_cmd_programming_enable(cmd, ret)
	152	elif cmd[0] == 0xac and (cmd[1] & (1 << 7)) == (1 << 7):
	153	self.handle_cmd_chip_erase(cmd, ret)
	154	elif cmd[:3] == [0x50, 0x00, 0x00]:
	155	self.handle_cmd_read_fuse_bits(cmd, ret)
	156	elif cmd[:3] == [0x58, 0x08, 0x00]:
	157	self.handle_cmd_read_fuse_high_bits(cmd, ret)
	158	elif cmd[:3] == [0x50, 0x08, 0x00]:
	159	self.handle_cmd_read_extended_fuse_bits(cmd, ret)
	160	elif cmd[0] == 0x30 and cmd[2] == 0x00:
	161	self.handle_cmd_read_signature_byte_0x00(cmd, ret)
	162	elif cmd[0] == 0x30 and cmd[2] == 0x01:
	163	self.handle_cmd_read_signature_byte_0x01(cmd, ret)
	164	elif cmd[0] == 0x30 and cmd[2] == 0x02:
	165	self.handle_cmd_read_signature_byte_0x02(cmd, ret)
	166	else:
	167	c = '%02x %02x %02x %02x' % tuple(cmd)
	168	r = '%02x %02x %02x %02x' % tuple(ret)
	169	self.putx([0, ['Unknown command: %s (reply: %s)!' % (c, r)]])
	170
	171	def decode(self, ss, es, data):
	172	ptype, mosi, miso = data
	173
	174	if ptype != 'DATA':
	175	return
	176
	177	# self.put(0, 0, self.out_ann,
	178	# [0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])
	179
	180	self.ss, self.es = ss, es
	181
	182	# Append new bytes.
	183	self.mosi_bytes.append(mosi)
	184	self.miso_bytes.append(miso)
	185
	186	if len(self.mosi_bytes) == 0:
	187	self.cmd_ss = ss
	188
	189	# All commands consist of 4 bytes.
	190	if len(self.mosi_bytes) < 4:
	191	return
192
193	self.cmd_es = es
194
195	self.handle_command(self.mosi_bytes, self.miso_bytes)
196
197	self.mosi_bytes = []
198	self.miso_bytes = []
199