[libsigrokdecode.git] / decoders / am230x / pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2014 Johannes Roemer <jroemer@physik.uni-wuerzburg.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

import sigrokdecode as srd

# Define valid timing values (in microseconds).
timing = {
    'START LOW'     : {'min': 750, 'max': 25000},
    'START HIGH'    : {'min': 10, 'max': 10000},
    'RESPONSE LOW'  : {'min': 70, 'max': 90},
    'RESPONSE HIGH' : {'min': 70, 'max': 90},
    'BIT LOW'       : {'min': 45, 'max': 90},
    'BIT 0 HIGH'    : {'min': 20, 'max': 35},
    'BIT 1 HIGH'    : {'min': 65, 'max': 80},
}

class SamplerateError(Exception):
    pass

class Decoder(srd.Decoder):
    api_version = 2
    id = 'am230x'
    name = 'AM230x/DHTxx'
    longname = 'Aosong AM230x/DHTxx'
    desc = 'Aosong AM230x/DHTxx humidity/temperature sensor protocol.'
    license = 'gplv2+'
    inputs = ['logic']
    outputs = ['am230x']
    channels = (
        {'id': 'sda', 'name': 'SDA', 'desc': 'Single wire serial data line'},
    )
    options = (
        {'id': 'dht11', 'desc': 'DHT11 compatibility mode',
            'default': 'no', 'values': ('no', 'yes')},
    )
    annotations = (
        ('start', 'Start'),
        ('response', 'Response'),
        ('bit', 'Bit'),
        ('end', 'End'),
        ('byte', 'Byte'),
        ('humidity', 'Relative humidity in percent'),
        ('temperature', 'Temperature in degrees Celsius'),
        ('checksum', 'Checksum'),
    )
    annotation_rows = (
        ('bits', 'Bits', (0, 1, 2, 3)),
        ('bytes', 'Bytes', (4,)),
        ('results', 'Results', (5, 6, 7)),
    )

    def putfs(self, data):
        self.put(self.fall, self.samplenum, self.out_ann, data)

    def putb(self, data):
        self.put(self.bytepos[-1], self.samplenum, self.out_ann, data)

    def putv(self, data):
        self.put(self.bytepos[-2], self.samplenum, self.out_ann, data)

    def reset(self):
        self.state = 'WAIT FOR START LOW'
        self.samplenum = 0
        self.fall = 0
        self.rise = 0
        self.bits = []
        self.bytepos = []

    def is_valid(self, name):
        dt = 0
        if name.endswith('LOW'):
            dt = self.samplenum - self.fall
        elif name.endswith('HIGH'):
            dt = self.samplenum - self.rise
        if dt >= self.cnt[name]['min'] and dt <= self.cnt[name]['max']:
            return True
        return False

    def bits2num(self, bitlist):
        number = 0
        for i in range(len(bitlist)):
            number += bitlist[-1 - i] * 2**i
        return number

    def calculate_humidity(self, bitlist):
        h = 0
        if self.options['dht11'] == 'yes':
            h = self.bits2num(bitlist[0:8])
        else:
            h = self.bits2num(bitlist) / 10
        return h

    def calculate_temperature(self, bitlist):
        t = 0
        if self.options['dht11'] == 'yes':
            t = self.bits2num(bitlist[0:8])
        else:
            t = self.bits2num(bitlist[1:]) / 10
            if bitlist[0] == 1:
                t = -t
        return t

    def calculate_checksum(self, bitlist):
        checksum = 0
        for i in range(8, len(bitlist) + 1, 8):
            checksum += self.bits2num(bitlist[i-8:i])
        return checksum % 256

    def __init__(self, **kwargs):
        self.samplerate = None
        self.reset()

    def start(self):
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def metadata(self, key, value):
        if key != srd.SRD_CONF_SAMPLERATE:
            return
        self.samplerate = value
        # Convert microseconds to sample counts.
        self.cnt = {}
        for e in timing:
            self.cnt[e] = {}
            for t in timing[e]:
                self.cnt[e][t] = timing[e][t] * self.samplerate / 1000000

    def decode(self, ss, es, data):
        if not self.samplerate:
            raise SamplerateError('Cannot decode without samplerate.')
        for (self.samplenum, (sda,)) in data:
            # State machine.
            if self.state == 'WAIT FOR START LOW':
                if sda != 0:
                    continue
                self.fall = self.samplenum
                self.state = 'WAIT FOR START HIGH'
            elif self.state == 'WAIT FOR START HIGH':
                if sda != 1:
                    continue
                if self.is_valid('START LOW'):
                    self.rise = self.samplenum
                    self.state = 'WAIT FOR RESPONSE LOW'
                else:
                    self.reset()
            elif self.state == 'WAIT FOR RESPONSE LOW':
                if sda != 0:
                    continue
                if self.is_valid('START HIGH'):
                    self.putfs([0, ['Start', 'S']])
                    self.fall = self.samplenum
                    self.state = 'WAIT FOR RESPONSE HIGH'
                else:
                    self.reset()
            elif self.state == 'WAIT FOR RESPONSE HIGH':
                if sda != 1:
                    continue
                if self.is_valid('RESPONSE LOW'):
                    self.rise = self.samplenum
                    self.state = 'WAIT FOR FIRST BIT'
                else:
                    self.reset()
            elif self.state == 'WAIT FOR FIRST BIT':
                if sda != 0:
                    continue
                if self.is_valid('RESPONSE HIGH'):
                    self.putfs([1, ['Response', 'R']])
                    self.fall = self.samplenum
                    self.bytepos.append(self.samplenum)
                    self.state = 'WAIT FOR BIT HIGH'
                else:
                    self.reset()
            elif self.state == 'WAIT FOR BIT HIGH':
                if sda != 1:
                    continue
                if self.is_valid('BIT LOW'):
                    self.rise = self.samplenum
                    self.state = 'WAIT FOR BIT LOW'
                else:
                    self.reset()
            elif self.state == 'WAIT FOR BIT LOW':
                if sda != 0:
                    continue
                if self.is_valid('BIT 0 HIGH'):
                    bit = 0
                elif self.is_valid('BIT 1 HIGH'):
                    bit = 1
                else:
                    self.reset()
                    continue
                self.bits.append(bit)
                self.putfs([2, ['Bit: %d' % bit, '%d' % bit]])
                self.fall = self.samplenum
                self.state = 'WAIT FOR BIT HIGH'
                if len(self.bits) % 8 == 0:
                    byte = self.bits2num(self.bits[-8:])
                    self.putb([4, ['Byte: %#04x' % byte, '%#04x' % byte]])
                    if len(self.bits) == 16:
                        h = self.calculate_humidity(self.bits[-16:])
                        self.putv([5, ['Humidity: %.1f %%' % h, 'RH = %.1f %%' % h]])
                    elif len(self.bits) == 32:
                        t = self.calculate_temperature(self.bits[-16:])
                        self.putv([6, ['Temperature: %.1f °C' % t, 'T = %.1f °C' % t]])
                    elif len(self.bits) == 40:
                        parity = self.bits2num(self.bits[-8:])
                        if parity == self.calculate_checksum(self.bits[0:32]):
                            self.putb([7, ['Checksum: OK', 'OK']])
                        else:
                            self.putb([7, ['Checksum: not OK', 'NOK']])
                        self.state = 'WAIT FOR END'
                    self.bytepos.append(self.samplenum)
            elif self.state == 'WAIT FOR END':
                if sda != 1:
                    continue
                self.putfs([3, ['End', 'E']])
                self.reset()
Commit	Line	Data
b1f2b85b JR	1	##
	2	## This file is part of the libsigrokdecode project.
	3	##
	4	## Copyright (C) 2014 Johannes Roemer <jroemer@physik.uni-wuerzburg.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	import sigrokdecode as srd
	22
	23	# Define valid timing values (in microseconds).
	24	timing = {
	25	'START LOW' : {'min': 750, 'max': 25000},
	26	'START HIGH' : {'min': 10, 'max': 10000},
	27	'RESPONSE LOW' : {'min': 70, 'max': 90},
	28	'RESPONSE HIGH' : {'min': 70, 'max': 90},
	29	'BIT LOW' : {'min': 45, 'max': 90},
	30	'BIT 0 HIGH' : {'min': 20, 'max': 35},
	31	'BIT 1 HIGH' : {'min': 65, 'max': 80},
	32	}
	33
	34	class SamplerateError(Exception):
	35	pass
	36
	37	class Decoder(srd.Decoder):
	38	api_version = 2
	39	id = 'am230x'
47405f47 UH	40	name = 'AM230x/DHTxx'
	41	longname = 'Aosong AM230x/DHTxx'
	42	desc = 'Aosong AM230x/DHTxx humidity/temperature sensor protocol.'
b1f2b85b JR	43	license = 'gplv2+'
	44	inputs = ['logic']
	45	outputs = ['am230x']
	46	channels = (
	47	{'id': 'sda', 'name': 'SDA', 'desc': 'Single wire serial data line'},
	48	)
	49	options = (
	50	{'id': 'dht11', 'desc': 'DHT11 compatibility mode',
	51	'default': 'no', 'values': ('no', 'yes')},
	52	)
	53	annotations = (
	54	('start', 'Start'),
	55	('response', 'Response'),
	56	('bit', 'Bit'),
	57	('end', 'End'),
	58	('byte', 'Byte'),
	59	('humidity', 'Relative humidity in percent'),
	60	('temperature', 'Temperature in degrees Celsius'),
	61	('checksum', 'Checksum'),
	62	)
	63	annotation_rows = (
	64	('bits', 'Bits', (0, 1, 2, 3)),
	65	('bytes', 'Bytes', (4,)),
	66	('results', 'Results', (5, 6, 7)),
	67	)
	68
	69	def putfs(self, data):
	70	self.put(self.fall, self.samplenum, self.out_ann, data)
	71
	72	def putb(self, data):
	73	self.put(self.bytepos[-1], self.samplenum, self.out_ann, data)
	74
	75	def putv(self, data):
	76	self.put(self.bytepos[-2], self.samplenum, self.out_ann, data)
	77
	78	def reset(self):
	79	self.state = 'WAIT FOR START LOW'
	80	self.samplenum = 0
	81	self.fall = 0
	82	self.rise = 0
	83	self.bits = []
	84	self.bytepos = []
	85
	86	def is_valid(self, name):
	87	dt = 0
	88	if name.endswith('LOW'):
	89	dt = self.samplenum - self.fall
	90	elif name.endswith('HIGH'):
	91	dt = self.samplenum - self.rise
	92	if dt >= self.cnt[name]['min'] and dt <= self.cnt[name]['max']:
	93	return True
	94	return False
	95
	96	def bits2num(self, bitlist):
	97	number = 0
47405f47 UH	98	for i in range(len(bitlist)):
47405f47 UH	99	number += bitlist[-1 - i] * 2**i
b1f2b85b JR	100	return number
	101
	102	def calculate_humidity(self, bitlist):
	103	h = 0
	104	if self.options['dht11'] == 'yes':
	105	h = self.bits2num(bitlist[0:8])
	106	else:
	107	h = self.bits2num(bitlist) / 10
	108	return h
	109
	110	def calculate_temperature(self, bitlist):
	111	t = 0
	112	if self.options['dht11'] == 'yes':
	113	t = self.bits2num(bitlist[0:8])
	114	else:
	115	t = self.bits2num(bitlist[1:]) / 10
	116	if bitlist[0] == 1:
	117	t = -t
	118	return t
	119
	120	def calculate_checksum(self, bitlist):
	121	checksum = 0
47405f47	122	for i in range(8, len(bitlist) + 1, 8):
b1f2b85b JR	123	checksum += self.bits2num(bitlist[i-8:i])
	124	return checksum % 256
	125
	126	def __init__(self, **kwargs):
	127	self.samplerate = None
	128	self.reset()
	129
	130	def start(self):
	131	self.out_ann = self.register(srd.OUTPUT_ANN)
	132
	133	def metadata(self, key, value):
	134	if key != srd.SRD_CONF_SAMPLERATE:
	135	return
	136	self.samplerate = value
	137	# Convert microseconds to sample counts.
	138	self.cnt = {}
	139	for e in timing:
	140	self.cnt[e] = {}
	141	for t in timing[e]:
	142	self.cnt[e][t] = timing[e][t] * self.samplerate / 1000000
	143
	144	def decode(self, ss, es, data):
	145	if not self.samplerate:
	146	raise SamplerateError('Cannot decode without samplerate.')
	147	for (self.samplenum, (sda,)) in data:
	148	# State machine.
	149	if self.state == 'WAIT FOR START LOW':
	150	if sda != 0:
	151	continue
	152	self.fall = self.samplenum
	153	self.state = 'WAIT FOR START HIGH'
	154	elif self.state == 'WAIT FOR START HIGH':
	155	if sda != 1:
	156	continue
	157	if self.is_valid('START LOW'):
	158	self.rise = self.samplenum
	159	self.state = 'WAIT FOR RESPONSE LOW'
	160	else:
	161	self.reset()
	162	elif self.state == 'WAIT FOR RESPONSE LOW':
	163	if sda != 0:
	164	continue
	165	if self.is_valid('START HIGH'):
	166	self.putfs([0, ['Start', 'S']])
	167	self.fall = self.samplenum
	168	self.state = 'WAIT FOR RESPONSE HIGH'
	169	else:
	170	self.reset()
	171	elif self.state == 'WAIT FOR RESPONSE HIGH':
	172	if sda != 1:
	173	continue
	174	if self.is_valid('RESPONSE LOW'):
	175	self.rise = self.samplenum
	176	self.state = 'WAIT FOR FIRST BIT'
	177	else:
	178	self.reset()
	179	elif self.state == 'WAIT FOR FIRST BIT':
	180	if sda != 0:
	181	continue
	182	if self.is_valid('RESPONSE HIGH'):
	183	self.putfs([1, ['Response', 'R']])
	184	self.fall = self.samplenum
	185	self.bytepos.append(self.samplenum)
	186	self.state = 'WAIT FOR BIT HIGH'
187	else:
f8716297	188	self.reset()
b1f2b85b JR	189	elif self.state == 'WAIT FOR BIT HIGH':
	190	if sda != 1:
	191	continue
	192	if self.is_valid('BIT LOW'):
	193	self.rise = self.samplenum
	194	self.state = 'WAIT FOR BIT LOW'
	195	else:
	196	self.reset()
	197	elif self.state == 'WAIT FOR BIT LOW':
	198	if sda != 0:
	199	continue
	200	if self.is_valid('BIT 0 HIGH'):
	201	bit = 0
	202	elif self.is_valid('BIT 1 HIGH'):
	203	bit = 1
	204	else:
	205	self.reset()
	206	continue
	207	self.bits.append(bit)
	208	self.putfs([2, ['Bit: %d' % bit, '%d' % bit]])
	209	self.fall = self.samplenum
	210	self.state = 'WAIT FOR BIT HIGH'
	211	if len(self.bits) % 8 == 0:
	212	byte = self.bits2num(self.bits[-8:])
	213	self.putb([4, ['Byte: %#04x' % byte, '%#04x' % byte]])
	214	if len(self.bits) == 16:
	215	h = self.calculate_humidity(self.bits[-16:])
	216	self.putv([5, ['Humidity: %.1f %%' % h, 'RH = %.1f %%' % h]])
	217	elif len(self.bits) == 32:
	218	t = self.calculate_temperature(self.bits[-16:])
	219	self.putv([6, ['Temperature: %.1f °C' % t, 'T = %.1f °C' % t]])
	220	elif len(self.bits) == 40:
	221	parity = self.bits2num(self.bits[-8:])
	222	if parity == self.calculate_checksum(self.bits[0:32]):
	223	self.putb([7, ['Checksum: OK', 'OK']])
	224	else:
	225	self.putb([7, ['Checksum: not OK', 'NOK']])
	226	self.state = 'WAIT FOR END'
	227	self.bytepos.append(self.samplenum)
	228	elif self.state == 'WAIT FOR END':
	229	if sda != 1:
	230	continue
	231	self.putfs([3, ['End', 'E']])
	232	self.reset()