]> sigrok.org Git - libsigrok.git/shortlog
libsigrok.git
2014-01-14 Daniel Elstnersysclk-lwla: Implement support for the LWLA1034.
2014-01-14 Daniel Elstnersysclk-lwla: Initial driver skeleton.
2014-01-14 Martin Lingrigol-ds: Use correct digital channel numbers when...
2014-01-14 Bert Vermeulencem-dt-885x: Don't use char as signed type.
2014-01-13 Aurelien Jacobsscpi: properly check for HAVE_RPC (which is always...
2014-01-13 Aurelien Jacobsrigol-ds: remove lonely break
2014-01-13 Aurelien Jacobsrigol-ds: prevent config_list() to return empty g_variant
2014-01-13 Bert VermeulenUse PRIu64 for format in pretty-printer.
2014-01-13 Aurelien Jacobsrigol-ds: does not depend on libserialport
2014-01-13 Aurelien Jacobsscpi_usbtmc: does not depend on libserialport
2014-01-13 poljar (Damir... udev: Add the Rigol DG4000 series to the udev rules
2014-01-13 Bert Vermeulenatten-pps3xxx: Fix options reporting.
2014-01-13 Bert Vermeulenatten-pps3xxx: Fix output channel mode get.
2014-01-12 Bert Vermeulendemo: Properly handle logic vs. analog when setting...
2014-01-12 Bert Vermeulendemo: Split supported device options by probe group.
2014-01-12 Aurelien Jacobsscpi_vxi: ensure the vxi link was properly opened befor...
2014-01-11 Aurelien Jacobsscpi_tcp: split into scpi_tcp_raw and scpi_tcp_rigol
2014-01-11 Aurelien Jacobsscpi: make the scpi_dev_inst_new more generic
2014-01-11 Aurelien Jacobsscpi: factorize dev_inst_new calls out of individual...
2014-01-11 Aurelien Jacobsscpi: add VXI transport support
2014-01-11 Aurelien Jacobsimport VXI RPC Language description
2014-01-11 Marc Schinkconfigure.ac: Disable atten-pps3xxx driver if libserial...
2014-01-11 Aurelien Jacobsstd: use #ifdef rather than #if where the constant...
2014-01-10 Bert Vermeulenatten-pps3xxx: Push configured settings even without...
2014-01-10 Bert Vermeulenatten-pps3xxx: Use configured values to construct packet.
2014-01-09 Bert Vermeulenatten-pps3xxx: Full support for the PPS3203T-3S.
2014-01-09 Bert VermeulenAdd config keys for programmable power supplies.
2014-01-09 Bert Vermeulenatten-pps3xxx: Initial driver skeleton.
2014-01-09 Bert Vermeulenchronovu-la8: Publish SR_CONF_MAX_UNCOMPRESSED_SAMPLES.
2014-01-09 Bert Vermeulenikalogic-scanalogic2: List all keys in device options.
2014-01-09 Bert Vermeulenzeroplus-logic-cube: List all keys in device options.
2014-01-09 Bert Vermeulenzeroplus-logic-cube: Publish SR_CONF_MAX_UNCOMPRESSED_S...
2014-01-09 Bert Vermeulenikalogic-scanalogic2: Publish SR_CONF_MAX_UNCOMPRESSED_...
2014-01-09 Bert VermeulenAdd support for SR_CONF_MAX_UNCOMPRESSED_SAMPLES.
2014-01-09 Bert VermeulenAdd SR_CONF_MAX_UNCOMPRESSED_SAMPLES.
2014-01-07 Bert VermeulenAdd sr_session_save_init().
2014-01-06 Uwe Hermannserial-dmm: Drop unused DMM_COUNT.
2014-01-06 Uwe Hermannhardware/common/dmm: Fix debug output level.
2014-01-06 Uwe Hermannserial-dmm: Support the Tenma 72-7745 via UT-D02 cable.
2014-01-06 Uwe HermannAdd support for the Tenma 72-7750 (UNI-T UT60G rebadge).
2014-01-06 Uwe HermannAdd initial support for the UNI-T UT60G.
2014-01-03 Uwe HermannREADME.devices: Cosmetics, consistency fixes, updates.
2014-01-03 Matthias Heidbrinkserial: Improved docs.
2014-01-03 Aurelien Jacobsscpi_usbtmc: fix reading of blocks bigger than the...
2014-01-03 Aurelien Jacobsrigol-ds: fix waveform reception on DS2000 series
2014-01-03 Aurelien Jacobsrigol-ds: add a few more DS2000 models to the supported...
2014-01-03 Russ Dillzeroplus: Add voltage threshold support
2014-01-03 Russ Dillzeroplus: Major rework of sample buffer processing
2014-01-03 Russ Dillzeroplus: Add getters for memory configuration
2014-01-03 Russ Dillzeroplus: Modify analyzer_read_start to just prep for...
2014-01-03 Russ Dillzeroplus: Always set DONT_CARE_TRIGGERBAR to 1
2014-01-03 Russ Dillzeroplus: Ignore capture ratio if there is no trigger
2014-01-03 Russ Dillzeroplus: Add missing config_get for SR_CONF_CAPTURE_RATIO
2014-01-03 Russ Dillzeroplus: Support all 32 channels of 32 channel models
2014-01-02 Matthias Heidbrinkgmc_mh_1x_2x: Fixed sign and AC/DC for current measurem...
2014-01-02 Uwe Hermannserial-dmm: Increase timeout when scanning for DMMs.
2014-01-02 Uwe Hermannserial-dmm: Drop obsolete function prototypes.
2014-01-02 Uwe HermannAdd initial support for the V&A VA40B multimeter.
2014-01-01 Uwe Hermannoutput/analog: Add missing space (consistency).
2014-01-01 Uwe Hermannuni-t-dmm: Fix incorrect order which breaks UT61B/C.
2014-01-01 Uwe HermannAdd support for the UNI-T UT61B multimeter.
2013-12-31 Uwe Hermannteleinfo: Fix a compiler warning (clang).
2013-12-31 Uwe Hermanngmc-mh-1x-2x: Fix compiler warning (clang).
2013-12-31 Uwe Hermannes519xx.c: Fix a few compiler warnings (clang).
2013-12-30 Aurelien Jacobsfix endian neutral helper macro to return an integer...
2013-12-30 Martin Lingols: Use serial source management wrappers.
2013-12-30 Martin Lingols: Mark all serial calls as blocking or nonblocking.
2013-12-30 Martin LingAdd blocking and nonblocking versions of serial_read...
2013-12-29 Aurelien Jacobsremove the es51922 protocol parser, superseded by the...
2013-12-29 Aurelien Jacobsswitch the UNI-T UT61E driver to the new es519xx parser
2013-12-29 Aurelien Jacobses519xx: correctly handle the VAHZ function
2013-12-29 Aurelien Jacobses519xx: apply the proper fixed factor in duty cycle...
2013-12-29 Aurelien Jacobses519xx: fix switching between frequency and duty cycle...
2013-12-29 Aurelien Jacobses519xx: correctly handle the voltage factor in diode...
2013-12-29 Aurelien Jacobses519xx: fix continuity mode handling
2013-12-29 Uwe HermannAdd support for the UNI-T UT61C multimeter.
2013-12-29 Uwe Hermannfx2lafw: Fix incorrect unitsize when a trigger fires.
2013-12-29 Uwe Hermannfx2lafw: Minor cleanups.
2013-12-29 Martin Lingrigol-ds: Correct usage of NUM_TIMEBASE and NUM_VDIV...
2013-12-29 Martin Lingscpi: Strip trailing newline from *IDN response if...
2013-12-29 Uwe Hermannvictor-dmm: Fix MIN/MAX always being reported.
2013-12-29 Bert Vermeulendemo: Analog probe support.
2013-12-29 Bert Vermeulendemo: User-configurable number of probes.
2013-12-29 Bert VermeulenAdd config keys for setting the number of analog probes.
2013-12-29 Bert VermeulenSkip analog probes in logic-only output formats.
2013-12-29 Martin LingRevise SCPI read API to allow backend-independent data...
2013-12-29 Martin LingAdd udev rule for Agilent DSO1000 series.
2013-12-29 Martin Lingrigol-ds: Support the rest of the DSO1000 range.
2013-12-29 Martin Lingrigol-ds: Support 4 analog channels.
2013-12-28 Martin Lingrigol-ds: Use correct live waveform size for Agilent...
2013-12-28 Martin Lingrigol-ds: Add support for Agilent DSO1014A.
2013-12-28 Martin Lingscpi: Log IDN? result.
2013-12-28 Bert VermeulenAdd config keys for upcoming RF demodulator drivers.
2013-12-28 Martin Lingrigol-ds: Fix rigol_ds_channel_start() for digital...
2013-12-28 Martin Lingrigol-ds: Use correct analog frame size for VS5000...
2013-12-28 Martin Lingrigol-ds: Use set_cfg wrapper for capture setup commands.
2013-12-28 Martin Lingrigol-ds: Select channels before issuing RUN command.
2013-12-27 Martin Lingrigol-ds: Unify partial read handling.
2013-12-27 Martin Lingrigol-ds: Unify code for counting expected incoming...
2013-12-27 Martin Lingrigol-ds: Use rigol_ds_channel_start() function for...
next