* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/** @file
+/**
+ * @file
+ *
* <em>Yokogawa DL/DLM series</em> oscilloscope driver
* @internal
*/
NULL,
};
-/* Note: Values must correlate to the trigger_slopes values */
+/* Note: Values must correlate to the trigger_slopes values. */
const char *dlm_trigger_slopes[3] = {
"r",
"f",
"1",
"2",
"3",
- "4"
+ "4",
};
static const char *scope_digital_channel_names_8[] = {
"D4",
"D5",
"D6",
- "D7"
+ "D7",
};
static const char *scope_digital_channel_names_32[] = {
unsigned int i;
char *tmp;
- for (i = 0; i < config->analog_channels; ++i) {
+ for (i = 0; i < config->analog_channels; i++) {
tmp = sr_voltage_string(dlm_vdivs[state->analog_states[i].vdiv][0],
dlm_vdivs[state->analog_states[i].vdiv][1]);
- sr_info("State of analog channel %d -> %s : %s (coupling) %s (vdiv) %2.2e (offset)",
+ sr_info("State of analog channel %d -> %s : %s (coupling) %s (vdiv) %2.2e (offset)",
i + 1, state->analog_states[i].state ? "On" : "Off",
(*config->coupling_options)[state->analog_states[i].coupling],
tmp, state->analog_states[i].vertical_offset);
}
- for (i = 0; i < config->digital_channels; ++i) {
+ for (i = 0; i < config->digital_channels; i++) {
sr_info("State of digital channel %d -> %s", i,
state->digital_states[i] ? "On" : "Off");
}
- for (i = 0; i < config->pods; ++i) {
+ for (i = 0; i < config->pods; i++) {
sr_info("State of digital POD %d -> %s", i,
state->pod_states[i] ? "On" : "Off");
}
*result = -1;
- for (i = 0; (*array)[i]; ++i)
+ for (i = 0; (*array)[i]; i++)
if (!g_strcmp0(value, (*array)[i])) {
*result = i;
break;
/* Transform e.g. 10^-03 to 1000 as the array stores the inverse. */
f = pow(10, abs(i));
- /* Adjust the significand/factor pair to make sure
+ /*
+ * Adjust the significand/factor pair to make sure
* that f is a multiple of 1000.
*/
while ((int)fmod(log10(f), 3) > 0) { s *= 10; f *= 10; }
scpi = sdi->conn;
- for (i = 0; i < config->analog_channels; ++i) {
+ for (i = 0; i < config->analog_channels; i++) {
if (dlm_analog_chan_state_get(scpi, i + 1,
&state->analog_states[i].state) != SR_OK)
scpi = sdi->conn;
- if (!config->digital_channels)
- {
- sr_warn("Tried obtaining digital channel states on a " \
- "model without digital inputs.");
- return SR_OK;
- }
+ if (!config->digital_channels) {
+ sr_warn("Tried obtaining digital channel states on a " \
+ "model without digital inputs.");
+ return SR_OK;
+ }
- for (i = 0; i < config->digital_channels; ++i) {
+ for (i = 0; i < config->digital_channels; i++) {
if (dlm_digital_chan_state_get(scpi, i + 1,
&state->digital_states[i]) != SR_OK) {
return SR_ERR;
}
}
- if (!config->pods)
- {
+ if (!config->pods) {
sr_warn("Tried obtaining pod states on a model without pods.");
return SR_OK;
}
- for (i = 0; i < config->pods; ++i) {
+ for (i = 0; i < config->pods; i++) {
if (dlm_digital_pod_state_get(scpi, i + 'A',
&state->pod_states[i]) != SR_OK)
return SR_ERR;
return SR_OK;
}
-/**
- *
- */
SR_PRIV int dlm_channel_state_set(const struct sr_dev_inst *sdi,
const int ch_index, gboolean ch_state)
{
break;
}
- ch->enabled = ch_state;
- state->digital_states[i] = ch_state;
- chan_found = TRUE;
+ ch->enabled = ch_state;
+ state->digital_states[i] = ch_state;
+ chan_found = TRUE;
- /* The corresponding pod has to be enabled also. */
- pod_enabled[i / 8] |= ch->enabled;
- } else
+ /* The corresponding pod has to be enabled also. */
+ pod_enabled[i / 8] |= ch->enabled;
+ } else {
/* Also check all other channels. Maybe we can disable a pod. */
pod_enabled[i / 8] |= ch->enabled;
+ }
break;
default:
result = SR_ERR_NA;
}
}
- for (i = 0; i < model->pods; ++i) {
+ for (i = 0; i < model->pods; i++) {
if (state->pod_states[i] == pod_enabled[i])
continue;
devc = sdi->priv;
state = devc->model_state;
- /* No need to find an active channel to query the sample rate:
+ /*
+ * No need to find an active channel to query the sample rate:
* querying any channel will do, so we use channel 1 all the time.
*/
if (dlm_analog_chan_srate_get(sdi->conn, 1, &tmp_float) != SR_OK)
}
/* Add digital channel groups. */
- for (i = 0; i < scope_models[model_index].pods; ++i) {
+ for (i = 0; i < scope_models[model_index].pods; i++) {
g_snprintf(tmp, sizeof(tmp), "POD%d", i);
devc->digital_groups[i] = g_malloc0(sizeof(struct sr_channel_group));
return SR_ERR;
}
- range = ch_state->waveform_range;
+ range = ch_state->waveform_range;
offset = ch_state->waveform_offset;
- /* Convert byte sample to voltage according to
+ /*
+ * Convert byte sample to voltage according to
* page 269 of the Communication Interface User's Manual.
*/
float_data = g_array_new(FALSE, FALSE, sizeof(float));
* @param cb_data Callback data, in this case our device instance.
*
* @return TRUE in case of success or a recoverable error,
- * FALSE when a fatal error was encountered.
+ * FALSE when a fatal error was encountered.
*/
SR_PRIV int dlm_data_receive(int fd, int revents, void *cb_data)
{
g_array_free(data, TRUE);
data = NULL;
- /* Signal the end of this frame if this was the last enabled channel
+ /*
+ * Signal the end of this frame if this was the last enabled channel
* and set the next enabled channel. Then, request its data.
*/
if (!devc->current_channel->next) {
sr_session_send(sdi, &packet);
devc->current_channel = devc->enabled_channels;
- /* As of now we only support importing the current acquisition
+ /*
+ * As of now we only support importing the current acquisition
* data so we're going to stop at this point.
*/
sdi->driver->dev_acquisition_stop(sdi, cb_data);
projects / libsigrok.git / blobdiff