static const uint32_t scanopts[] = {
SR_CONF_CONN,
+ SR_CONF_SERIALCOMM,
};
static const uint32_t drvopts[] = {
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
- struct drv_context *drvc;
- struct dev_context *devc;
- struct sr_dev_inst *sdi;
+ const char *conn, *serialcomm;
struct sr_config *src;
- GSList *usb_devices, *devices, *l;
- unsigned int i;
- const char *conn;
-
- drvc = di->context;
+ GSList *l, *devices;
+ struct sr_serial_dev_inst *serial;
+ int rc;
+ struct sr_dev_inst *sdi;
+ struct dev_context *devc;
+ size_t i;
- conn = "1a86.e008";
+ conn = "hid/ch9325";
+ serialcomm = "2400/8n1";
for (l = options; l; l = l->next) {
src = l->data;
switch (src->key) {
case SR_CONF_CONN:
conn = g_variant_get_string(src->data, NULL);
break;
+ case SR_CONF_SERIALCOMM:
+ serialcomm = g_variant_get_string(src->data, NULL);
+ break;
}
}
- if (!conn)
- return NULL;
devices = NULL;
- if ((usb_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn))) {
- /* We have a list of sr_usb_dev_inst matching the connection
- * string. Wrap them in sr_dev_inst and we're done. */
- for (l = usb_devices; l; l = l->next) {
- sdi = g_malloc0(sizeof(struct sr_dev_inst));
- sdi->status = SR_ST_INACTIVE;
- sdi->vendor = g_strdup("UNI-T");
- sdi->model = g_strdup("UT32x");
- sdi->inst_type = SR_INST_USB;
- sdi->conn = l->data;
- for (i = 0; i < ARRAY_SIZE(channel_names); i++)
- sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE,
- channel_names[i]);
- devc = g_malloc0(sizeof(struct dev_context));
- sdi->priv = devc;
- sr_sw_limits_init(&devc->limits);
- devc->data_source = DEFAULT_DATA_SOURCE;
- devices = g_slist_append(devices, sdi);
- }
- g_slist_free(usb_devices);
- } else
- g_slist_free_full(usb_devices, g_free);
-
- return std_scan_complete(di, devices);
-}
-
-static int dev_open(struct sr_dev_inst *sdi)
-{
- struct sr_dev_driver *di = sdi->driver;
- struct drv_context *drvc = di->context;
- struct sr_usb_dev_inst *usb;
- int ret;
-
- usb = sdi->conn;
-
- if (sr_usb_open(drvc->sr_ctx->libusb_ctx, usb) != SR_OK)
- return SR_ERR;
-
-/*
- * The libusb 1.0.9 Darwin backend is broken: it can report a kernel
- * driver being active, but detaching it always returns an error.
- */
-#if !defined(__APPLE__)
- if (libusb_kernel_driver_active(usb->devhdl, USB_INTERFACE) == 1) {
- if ((ret = libusb_detach_kernel_driver(usb->devhdl, USB_INTERFACE)) < 0) {
- sr_err("failed to detach kernel driver: %s",
- libusb_error_name(ret));
- return SR_ERR;
- }
+ serial = sr_serial_dev_inst_new(conn, serialcomm);
+ rc = serial_open(serial, SERIAL_RDWR);
+ serial_flush(serial);
+ /* Cannot query/identify the device. Successful open shall suffice. */
+ serial_close(serial);
+ if (rc != SR_OK) {
+ sr_serial_dev_inst_free(serial);
+ return devices;
}
-#endif
- if ((ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION))) {
- sr_err("Failed to set configuration: %s.", libusb_error_name(ret));
- return SR_ERR;
+ sdi = g_malloc0(sizeof(*sdi));
+ sdi->status = SR_ST_INACTIVE;
+ sdi->vendor = g_strdup("UNI-T");
+ sdi->model = g_strdup("UT32x");
+ sdi->inst_type = SR_INST_SERIAL;
+ sdi->conn = serial;
+ devc = g_malloc0(sizeof(*devc));
+ sdi->priv = devc;
+ sr_sw_limits_init(&devc->limits);
+ devc->data_source = DEFAULT_DATA_SOURCE;
+ for (i = 0; i < ARRAY_SIZE(channel_names); i++) {
+ sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE,
+ channel_names[i]);
}
+ devices = g_slist_append(devices, sdi);
- if ((ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE))) {
- sr_err("Failed to claim interface: %s.", libusb_error_name(ret));
- return SR_ERR;
- }
+ serial_close(serial);
+ if (!devices)
+ sr_serial_dev_inst_free(serial);
- return SR_OK;
-}
-
-static int dev_close(struct sr_dev_inst *sdi)
-{
- struct sr_usb_dev_inst *usb;
-
- usb = sdi->conn;
-
- if (!usb->devhdl)
- return SR_ERR_BUG;
-
- libusb_release_interface(usb->devhdl, USB_INTERFACE);
- libusb_close(usb->devhdl);
- usb->devhdl = NULL;
-
- return SR_OK;
+ return std_scan_complete(di, devices);
}
static int config_get(uint32_t key, GVariant **data,
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
- struct sr_dev_driver *di = sdi->driver;
- struct drv_context *drvc;
struct dev_context *devc;
- struct sr_usb_dev_inst *usb;
- int len, ret;
- unsigned char cmd[2];
+ struct sr_serial_dev_inst *serial;
+ uint8_t cmd;
- drvc = di->context;
devc = sdi->priv;
- usb = sdi->conn;
+ serial = sdi->conn;
sr_sw_limits_acquisition_start(&devc->limits);
devc->packet_len = 0;
-
- /* Configure serial port parameters on USB-UART interface
- * chip inside the device (just baudrate 2400 actually). */
- cmd[0] = 0x09;
- cmd[1] = 0x60;
- ret = libusb_control_transfer(usb->devhdl, 0x21, 0x09, 0x0300, 0x00,
- cmd, 2, 5);
- if (ret != 2) {
- sr_dbg("Failed to configure CH9325: %s", libusb_error_name(ret));
- return SR_ERR;
- }
-
std_session_send_df_header(sdi);
- if (!(devc->xfer = libusb_alloc_transfer(0)))
- return SR_ERR;
-
- /* Length of payload to follow. */
- cmd[0] = 0x01;
if (devc->data_source == DATA_SOURCE_LIVE)
- cmd[1] = CMD_GET_LIVE;
+ cmd = CMD_GET_LIVE;
else
- cmd[1] = CMD_GET_STORED;
-
- ret = libusb_bulk_transfer(usb->devhdl, EP_OUT, cmd, 2, &len, 5);
- if (ret != 0 || len != 2) {
- sr_dbg("Failed to start acquisition: %s", libusb_error_name(ret));
- libusb_free_transfer(devc->xfer);
- return SR_ERR;
- }
-
- libusb_fill_bulk_transfer(devc->xfer, usb->devhdl, EP_IN, devc->buf,
- 8, uni_t_ut32x_receive_transfer, (void *)sdi, 15);
- if (libusb_submit_transfer(devc->xfer) != 0) {
- libusb_free_transfer(devc->xfer);
- return SR_ERR;
- }
+ cmd = CMD_GET_STORED;
+ serial_write_blocking(serial, &cmd, sizeof(cmd), 0);
- usb_source_add(sdi->session, drvc->sr_ctx, 10,
- uni_t_ut32x_handle_events, (void *)sdi);
+ serial_source_add(sdi->session, serial, G_IO_IN, 10,
+ ut32x_handle_events, (void *)sdi);
return SR_OK;
}
static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- /* Signal USB transfer handler to clean up and stop. */
+ /* Have the reception routine stop the acquisition. */
sdi->status = SR_ST_STOPPING;
return SR_OK;
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
- .dev_open = dev_open,
- .dev_close = dev_close,
+ .dev_open = std_serial_dev_open,
+ .dev_close = std_serial_dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
projects / libsigrok.git / blobdiff