#include "protocol.h"
#define CH_IDX(x) (1 << x)
-#define FREQ_DC_ONLY {0, 0, 0}
+#define FREQ_DC_ONLY {0, 0, 0, 0, 0}
static const uint32_t devopts_none[] = { };
};
static const struct channel_spec agilent_n5767a_ch[] = {
- { "1", { 0, 60, 0.0001 }, { 0, 25, 0.1 }, FREQ_DC_ONLY },
+ { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY },
};
static const struct channel_spec agilent_n5763a_ch[] = {
- { "1", { 0, 12.5, 0.001 }, { 0, 25, 0.01 }, FREQ_DC_ONLY },
+ { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY },
};
/*
};
static const struct channel_spec chroma_61604_ch[] = {
- { "1", { 0, 300, 0.1 }, { 0, 16, 0.1 }, { 1.0, 1000.0, 0.01 } },
+ { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 } },
};
static const struct channel_group_spec chroma_61604_cg[] = {
struct channel_group_spec **channel_groups,
unsigned int *num_channel_groups)
{
- unsigned int volts, amps;
+ unsigned int volts, amps, watts;
struct channel_spec *channel;
(void)sdi;
- sscanf(hw_info->model, "%*[^P]P-%u-%u", &volts, &s);
- sr_dbg("Found device rated for %d V and %d A", volts, amps);
+ sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s);
+ watts *= 100;
+ sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts);
if (volts > 600) {
sr_err("Probed max voltage of %u V is out of spec.", volts);
return SR_ERR_BUG;
}
- if (volts > 120) {
+ if (amps > 120) {
sr_err("Probed max current of %u A is out of spec.", amps);
return SR_ERR_BUG;
}
+ if (watts > 5000) {
+ sr_err("Probed max power of %u W is out of spec.", watts);
+ return SR_ERR_BUG;
+ }
+
channel = g_malloc0(sizeof(struct channel_spec));
channel->name = "1";
- channel->voltage[0] = channel->current[0] = 0.0;
+ channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0;
channel->voltage[1] = (float)volts;
channel->current[1] = (float)amps;
+ channel->power[1] = (float)watts;
channel->voltage[2] = channel->current[2] = 0.01;
+ channel->voltage[3] = channel->voltage[4] = 3;
+ channel->current[3] = channel->current[4] = 4;
*channels = channel;
*num_channels = 1;
};
static const struct channel_spec rigol_dp821a_ch[] = {
- { "1", { 0, 60, 0.001 }, { 0, 1, 0.0001 }, FREQ_DC_ONLY },
- { "2", { 0, 8, 0.001 }, { 0, 10, 0.001 }, FREQ_DC_ONLY },
+ { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY },
};
static const struct channel_spec rigol_dp831_ch[] = {
- { "1", { 0, 8, 0.001 }, { 0, 5, 0.0003 }, FREQ_DC_ONLY },
- { "2", { 0, 30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY },
- { "3", { 0, -30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY },
+ { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
};
static const struct channel_spec rigol_dp832_ch[] = {
- { "1", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
- { "2", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
- { "3", { 0, 5, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
+ { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
};
static const struct channel_group_spec rigol_dp820_cg[] = {
};
/* HP 663xx series */
+
+static const uint32_t hp_6630a_devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_ENABLED | SR_CONF_SET,
+ SR_CONF_VOLTAGE | SR_CONF_GET,
+ SR_CONF_CURRENT | SR_CONF_GET,
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET,
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
+};
+
static const uint32_t hp_6632b_devopts[] = {
SR_CONF_CONTINUOUS,
SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
};
+static const struct channel_spec hp_6633a_ch[] = {
+ { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY },
+};
+
static const struct channel_spec hp_6632b_ch[] = {
- { "1", { 0, 20.475, 0.005 }, { 0, 5.1188, 0.00132 }, FREQ_DC_ONLY },
+ { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY },
};
-static const struct channel_group_spec hp_6632b_cg[] = {
+static const struct channel_group_spec hp_663xx_cg[] = {
{ "1", CH_IDX(0), 0 },
};
+static const struct scpi_command hp_6630a_cmd[] = {
+ { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" },
+ { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" },
+ { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" },
+ { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" },
+ { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" },
+ { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" },
+ { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" },
+ { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" },
+ ALL_ZERO
+};
+
static const struct scpi_command hp_6632b_cmd[] = {
{ SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" },
{ SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" },
static const struct philips_pm2800_module_spec {
/* Min, max, programming resolution. */
- float voltage[3];
- float current[3];
+ float voltage[5];
+ float current[5];
+ float power[5];
} philips_pm2800_module_specs[] = {
/* Autoranging modules. */
- [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075 }, { 0, 10, 0.0025 } },
- [PM2800_MOD_60V_5A] = { { 0, 60, 0.015 }, { 0, 5, 0.00125 } },
- [PM2800_MOD_60V_10A] = { { 0, 60, 0.015 }, { 0, 10, 0.0025 } },
+ [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } },
+ [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } },
+ [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } },
/* Linear modules. */
- [PM2800_MOD_8V_15A] = { { 0, 8, 0.002 }, { -15, 15, 0.00375 } },
- [PM2800_MOD_60V_2A] = { { 0, 60, 0.015 }, { -2, 2, 0.0005 } },
- [PM2800_MOD_120V_1A] = { { 0, 120, 0.030 }, { -1, 1, 0.00025 } },
+ [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } },
+ [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } },
+ [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } },
};
static const struct philips_pm2800_model {
for (i = 0; i < num_modules; i++) {
module = model->modules[i];
spec = &philips_pm2800_module_specs[module];
- sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA", i + 1,
+ sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1,
spec->voltage[0], spec->voltage[1],
- spec->current[0], spec->current[1]);
+ spec->current[0], spec->current[1],
+ spec->power[0] , spec->power[1]);
(*channels)[i].name = (char *)philips_pm2800_names[i];
- memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 6);
+ memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 15);
(*channel_groups)[i].name = (char *)philips_pm2800_names[i];
(*channel_groups)[i].channel_index_mask = 1 << i;
(*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP;
chroma_62000_cmd,
.probe_channels = chroma_62000p_probe_channels,
},
+ /* HP 6633A */
+ { "HP", "6633A", 0,
+ ARRAY_AND_SIZE(hp_6630a_devopts),
+ ARRAY_AND_SIZE(devopts_none),
+ ARRAY_AND_SIZE(hp_6633a_ch),
+ ARRAY_AND_SIZE(hp_663xx_cg),
+ hp_6630a_cmd,
+ .probe_channels = NULL,
+ },
+
/* HP 6632B */
{ "HP", "6632B", 0,
ARRAY_AND_SIZE(hp_6632b_devopts),
ARRAY_AND_SIZE(devopts_none),
ARRAY_AND_SIZE(hp_6632b_ch),
- ARRAY_AND_SIZE(hp_6632b_cg),
+ ARRAY_AND_SIZE(hp_663xx_cg),
hp_6632b_cmd,
.probe_channels = NULL,
},
projects / libsigrok.git / blobdiff