ALL_ZERO
};
+static const uint32_t rs_hmp4040_devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
+};
+
+static const uint32_t rs_hmp4040_devopts_cg[] = {
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_VOLTAGE | SR_CONF_GET,
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT | SR_CONF_GET,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_REGULATION | SR_CONF_GET,
+};
+
+static const struct channel_spec rs_hmp4040_ch[] = {
+ { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
+ { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
+ { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
+ { "4", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
+};
+
+static const struct channel_group_spec rs_hmp4040_cg[] = {
+ { "1", CH_IDX(0), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
+ { "2", CH_IDX(1), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
+ { "3", CH_IDX(2), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
+ { "4", CH_IDX(3), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
+};
+
+/*
+ * Developer's note: Currently unused device commands. Some of them
+ * are not in use because SCPI_CMD codes are not defined yet.
+ * OUTP:GEN
+ * VOLT? MAX, CURR? MAX
+ * VOLT:PROT:CLE (could set SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE)
+ * VOLT:PROT:MODE
+ * FUSE:STAT, FUSE:TRIP?, FUSE:LINK, FUSE:UNL
+ * ARB:...
+ * SYST:LOC, SYST:REM, SYST:RWL, SYST:MIX
+ * SYST:BEEP:IMM
+ */
+static const struct scpi_command rs_hmp4040_cmd[] = {
+ { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
+ { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
+ { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
+ { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
+ { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
+ { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
+ { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
+ { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
+ { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
+ { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
+ { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:QUES:INST:ISUM%s:COND?" },
+ { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
+ { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
+ { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:INST:ISUM%s:COND?" },
+ ALL_ZERO
+};
+
+static int rs_hmp_init_acquisition(const struct sr_dev_inst *sdi)
+{
+ struct sr_scpi_dev_inst *scpi;
+ int ret;
+
+ scpi = sdi->conn;
+
+ /*
+ * Sets the system to remote state. The front panel and remote
+ * control are possible simultaneously (mixed mode).
+ */
+ ret = sr_scpi_send(scpi, "SYST:MIX");
+ if (ret != SR_OK)
+ return ret;
+
+ return SR_OK;
+}
+
SR_PRIV const struct scpi_pps pps_profiles[] = {
/* Agilent N5763A */
{ "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0,
.init_acquisition = NULL,
.update_status = NULL,
},
+
+ /* Hameg / Rohde&Schwarz HMP4000 series */
+ /* TODO Match on regex, pass scpi_pps item to .probe_channels(). */
+ { "HAMEG", "HMP4030", SCPI_DIALECT_HMP, 0,
+ ARRAY_AND_SIZE(rs_hmp4040_devopts),
+ ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
+ rs_hmp4040_ch, 3,
+ rs_hmp4040_cg, 3,
+ rs_hmp4040_cmd,
+ .probe_channels = NULL,
+ .init_acquisition = rs_hmp_init_acquisition,
+ .update_status = NULL,
+ },
+ { "HAMEG", "HMP4040", SCPI_DIALECT_HMP, 0,
+ ARRAY_AND_SIZE(rs_hmp4040_devopts),
+ ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
+ ARRAY_AND_SIZE(rs_hmp4040_ch),
+ ARRAY_AND_SIZE(rs_hmp4040_cg),
+ rs_hmp4040_cmd,
+ .probe_channels = NULL,
+ .init_acquisition = rs_hmp_init_acquisition,
+ .update_status = NULL,
+ },
+ { "ROHDE&SCHWARZ", "HMP4030", SCPI_DIALECT_HMP, 0,
+ ARRAY_AND_SIZE(rs_hmp4040_devopts),
+ ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
+ rs_hmp4040_ch, 3,
+ rs_hmp4040_cg, 3,
+ rs_hmp4040_cmd,
+ .probe_channels = NULL,
+ .init_acquisition = rs_hmp_init_acquisition,
+ .update_status = NULL,
+ },
+ { "ROHDE&SCHWARZ", "HMP4040", SCPI_DIALECT_HMP, 0,
+ ARRAY_AND_SIZE(rs_hmp4040_devopts),
+ ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
+ ARRAY_AND_SIZE(rs_hmp4040_ch),
+ ARRAY_AND_SIZE(rs_hmp4040_cg),
+ rs_hmp4040_cmd,
+ .probe_channels = NULL,
+ .init_acquisition = rs_hmp_init_acquisition,
+ .update_status = NULL,
+ },
};
SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);
projects / libsigrok.git / blobdiff