* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include "protocol.h"
-#include <libserialport.h>
#define SERIALCOMM "115200/8n1"
+static const uint32_t drvopts[] = {
+ SR_CONF_LOGIC_ANALYZER,
+};
+
static const uint32_t scanopts[] = {
SR_CONF_CONN,
SR_CONF_SERIALCOMM,
};
static const uint32_t devopts[] = {
- SR_CONF_LOGIC_ANALYZER,
SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
};
/* Channels are numbered 0-31 (on the PCB silkscreen). */
-SR_PRIV const char *ols_channel_names[NUM_CHANNELS + 1] = {
+SR_PRIV const char *ols_channel_names[] = {
"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
"13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
"24", "25", "26", "27", "28", "29", "30", "31",
- NULL,
};
/* Default supported samplerates, can be overridden by device metadata. */
SR_HZ(1),
};
+#define RESPONSE_DELAY_US (10 * 1000)
+
SR_PRIV struct sr_dev_driver ols_driver_info;
-static struct sr_dev_driver *di = &ols_driver_info;
-static int init(struct sr_context *sr_ctx)
+static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
{
return std_init(sr_ctx, di, LOG_PREFIX);
}
-static GSList *scan(GSList *options)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config *src;
struct sr_dev_inst *sdi;
struct drv_context *drvc;
- struct dev_context *devc;
- struct sr_channel *ch;
struct sr_serial_dev_inst *serial;
- GPollFD probefd;
GSList *l, *devices;
- int ret, i;
+ int ret;
+ unsigned int i;
const char *conn, *serialcomm;
char buf[8];
- drvc = di->priv;
+ drvc = di->context;
devices = NULL;
if (!conn)
return NULL;
- if (serialcomm == NULL)
+ if (!serialcomm)
serialcomm = SERIALCOMM;
- if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
- return NULL;
+ serial = sr_serial_dev_inst_new(conn, serialcomm);
/* The discovery procedure is like this: first send the Reset
* command (0x00) 5 times, since the device could be anywhere
}
send_shortcommand(serial, CMD_ID);
- /* Wait 10ms for a response. */
- g_usleep(10000);
+ g_usleep(RESPONSE_DELAY_US);
- sp_get_port_handle(serial->data, &probefd.fd);
- probefd.events = G_IO_IN;
- g_poll(&probefd, 1, 1);
-
- if (probefd.revents != G_IO_IN)
+ if (sp_input_waiting(serial->data) == 0) {
+ sr_dbg("Didn't get any reply.");
return NULL;
- if (serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4)) != 4)
+ }
+
+ ret = serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4));
+ if (ret != 4) {
+ sr_err("Invalid reply (expected 4 bytes, got %d).", ret);
return NULL;
- if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
+ }
+
+ if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) {
+ sr_err("Invalid reply (expected '1SLO' or '1ALS', got "
+ "'%c%c%c%c').", buf[0], buf[1], buf[2], buf[3]);
return NULL;
+ }
/* Definitely using the OLS protocol, check if it supports
* the metadata command.
*/
send_shortcommand(serial, CMD_METADATA);
- if (g_poll(&probefd, 1, 10) > 0) {
+
+ g_usleep(RESPONSE_DELAY_US);
+
+ if (sp_input_waiting(serial->data) != 0) {
/* Got metadata. */
sdi = get_metadata(serial);
- devc = sdi->priv;
} else {
/* Not an OLS -- some other board that uses the sump protocol. */
sr_info("Device does not support metadata.");
- sdi = sr_dev_inst_new();
+ sdi = g_malloc0(sizeof(struct sr_dev_inst));
sdi->status = SR_ST_INACTIVE;
sdi->vendor = g_strdup("Sump");
sdi->model = g_strdup("Logic Analyzer");
sdi->version = g_strdup("v1.0");
sdi->driver = di;
- for (i = 0; i < 32; i++) {
- if (!(ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
- ols_channel_names[i])))
- return 0;
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
- devc = ols_dev_new();
- sdi->priv = devc;
+ for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
+ sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
+ ols_channel_names[i]);
+ sdi->priv = ols_dev_new();
}
/* Configure samplerate and divider. */
if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
return devices;
}
-static GSList *dev_list(void)
+static GSList *dev_list(const struct sr_dev_driver *di)
{
- return ((struct drv_context *)(di->priv))->instances;
+ return ((struct drv_context *)(di->context))->instances;
}
-static int cleanup(void)
+static int cleanup(const struct sr_dev_driver *di)
{
return std_dev_clear(di, NULL);
}
scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
break;
case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
+ if (!sdi)
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
+ drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
+ else
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
+ devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
break;
case SR_CONF_SAMPLERATE:
g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
.dev_close = std_serial_dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
+ .context = NULL,
};
projects / libsigrok.git / blobdiff