#define SERIALCOMM "115200/8n1"
-static const uint32_t drvopts[] = {
- SR_CONF_LOGIC_ANALYZER,
-};
-
static const uint32_t scanopts[] = {
SR_CONF_CONN,
SR_CONF_SERIALCOMM,
};
+static const uint32_t drvopts[] = {
+ SR_CONF_LOGIC_ANALYZER,
+};
+
static const uint32_t devopts[] = {
SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_HZ(1),
};
-#define RESPONSE_DELAY_US (10 * 1000)
-
-SR_PRIV struct sr_dev_driver ols_driver_info;
-
-static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
-{
- return std_init(sr_ctx, di, LOG_PREFIX);
-}
+#define RESPONSE_DELAY_US (20 * 1000)
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config *src;
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
struct sr_serial_dev_inst *serial;
- GSList *l, *devices;
+ GSList *l;
int ret;
unsigned int i;
const char *conn, *serialcomm;
char buf[8];
- drvc = di->context;
-
- devices = NULL;
-
conn = serialcomm = NULL;
for (l = options; l; l = l->next) {
src = l->data;
if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
- ret = SR_OK;
- for (i = 0; i < 5; i++) {
- if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
- sr_err("Port %s is not writable.", conn);
- break;
- }
- }
- if (ret != SR_OK) {
+ if (ols_send_reset(serial) != SR_OK) {
serial_close(serial);
sr_err("Could not use port %s. Quitting.", conn);
return NULL;
sdi->vendor = g_strdup("Sump");
sdi->model = g_strdup("Logic Analyzer");
sdi->version = g_strdup("v1.0");
- sdi->driver = di;
for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
ols_channel_names[i]);
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
- drvc->instances = g_slist_append(drvc->instances, sdi);
- devices = g_slist_append(devices, sdi);
-
serial_close(serial);
- return devices;
-}
-
-static GSList *dev_list(const struct sr_dev_driver *di)
-{
- return ((struct drv_context *)(di->context))->instances;
+ return std_scan_complete(di, g_slist_append(NULL, sdi));
}
-static int cleanup(const struct sr_dev_driver *di)
-{
- return std_dev_clear(di, NULL);
-}
-
-static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_get(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
return SR_ERR_ARG;
devc = sdi->priv;
+
switch (key) {
case SR_CONF_SAMPLERATE:
*data = g_variant_new_uint64(devc->cur_samplerate);
return SR_OK;
}
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
uint16_t flag;
uint64_t tmp_u64;
- int ret;
const char *stropt;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
switch (key) {
tmp_u64 = g_variant_get_uint64(data);
if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
return SR_ERR_SAMPLERATE;
- ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
- break;
+ return ols_set_samplerate(sdi, g_variant_get_uint64(data));
case SR_CONF_LIMIT_SAMPLES:
tmp_u64 = g_variant_get_uint64(data);
if (tmp_u64 < MIN_NUM_SAMPLES)
return SR_ERR;
devc->limit_samples = tmp_u64;
- ret = SR_OK;
break;
case SR_CONF_CAPTURE_RATIO:
devc->capture_ratio = g_variant_get_uint64(data);
- if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
- ret = SR_ERR;
- else
- ret = SR_OK;
break;
case SR_CONF_EXTERNAL_CLOCK:
if (g_variant_get_boolean(data)) {
sr_info("Disabled external clock.");
devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL;
}
- ret = SR_OK;
break;
case SR_CONF_PATTERN_MODE:
stropt = g_variant_get_string(data, NULL);
- ret = SR_OK;
- flag = 0xffff;
if (!strcmp(stropt, STR_PATTERN_NONE)) {
sr_info("Disabling test modes.");
flag = 0x0000;
- }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
+ } else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
sr_info("Enabling internal test mode.");
flag = FLAG_INTERNAL_TEST_MODE;
} else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) {
sr_info("Enabling external test mode.");
flag = FLAG_EXTERNAL_TEST_MODE;
} else {
- ret = SR_ERR;
- }
- if (flag != 0xffff) {
- devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE);
- devc->flag_reg |= flag;
+ return SR_ERR;
}
+ devc->flag_reg &= ~FLAG_INTERNAL_TEST_MODE;
+ devc->flag_reg &= ~FLAG_EXTERNAL_TEST_MODE;
+ devc->flag_reg |= flag;
break;
case SR_CONF_SWAP:
if (g_variant_get_boolean(data)) {
sr_info("Disabling channel swapping.");
devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
}
- ret = SR_OK;
break;
-
case SR_CONF_RLE:
if (g_variant_get_boolean(data)) {
sr_info("Enabling RLE.");
sr_info("Disabling RLE.");
devc->flag_reg &= ~FLAG_RLE;
}
- ret = SR_OK;
break;
default:
- ret = SR_ERR_NA;
+ return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
- GVariant *gvar, *grange[2];
- GVariantBuilder gvb;
int num_ols_changrp, i;
- (void)cg;
-
switch (key) {
case SR_CONF_SCAN_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
- break;
case SR_CONF_DEVICE_OPTIONS:
- if (!sdi)
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
- else
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- break;
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
- ARRAY_SIZE(samplerates), sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
- *data = g_variant_builder_end(&gvb);
+ *data = std_gvar_samplerates_steps(ARRAY_AND_SIZE(samplerates));
break;
case SR_CONF_TRIGGER_MATCH:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
- trigger_matches, ARRAY_SIZE(trigger_matches),
- sizeof(int32_t));
+ *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches));
break;
case SR_CONF_PATTERN_MODE:
- *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
+ *data = g_variant_new_strv(ARRAY_AND_SIZE(patterns));
break;
case SR_CONF_LIMIT_SAMPLES:
if (!sdi)
if (devc->channel_mask & (0xff << (i * 8)))
num_ols_changrp++;
}
- grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
- if (num_ols_changrp)
- grange[1] = g_variant_new_uint64(devc->max_samples / num_ols_changrp);
- else
- grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES);
- *data = g_variant_new_tuple(grange, 2);
+
+ *data = std_gvar_tuple_u64(MIN_NUM_SAMPLES,
+ (num_ols_changrp) ? devc->max_samples / num_ols_changrp : MIN_NUM_SAMPLES);
break;
default:
return SR_ERR_NA;
{
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
- uint16_t samplecount, readcount, delaycount;
+ uint32_t samplecount, readcount, delaycount;
uint8_t ols_changrp_mask, arg[4];
int num_ols_changrp;
int ret, i;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
serial = sdi->conn;
/*
* Limit readcount to prevent reading past the end of the hardware
- * buffer.
+ * buffer. Rather read too many samples than too few.
*/
samplecount = MIN(devc->max_samples / num_ols_changrp, devc->limit_samples);
- readcount = samplecount / 4;
-
- /* Rather read too many samples than too few. */
- if (samplecount % 4 != 0)
- readcount++;
+ readcount = (samplecount + 3) / 4;
/* Basic triggers. */
if (ols_convert_trigger(sdi) != SR_OK) {
return SR_ERR;
}
if (devc->num_stages > 0) {
+ /*
+ * According to http://mygizmos.org/ols/Logic-Sniffer-FPGA-Spec.pdf
+ * reset command must be send prior each arm command
+ */
+ sr_dbg("Send reset command before trigger configure");
+ if (ols_send_reset(serial) != SR_OK)
+ return SR_ERR;
+
delaycount = readcount * (1 - devc->capture_ratio / 100.0);
devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
for (i = 0; i <= devc->num_stages; i++) {
/* Send sample limit and pre/post-trigger capture ratio. */
sr_dbg("Setting sample limit %d, trigger point at %d",
(readcount - 1) * 4, (delaycount - 1) * 4);
- arg[0] = ((readcount - 1) & 0xff);
- arg[1] = ((readcount - 1) & 0xff00) >> 8;
- arg[2] = ((delaycount - 1) & 0xff);
- arg[3] = ((delaycount - 1) & 0xff00) >> 8;
- if (send_longcommand(serial, CMD_CAPTURE_SIZE, arg) != SR_OK)
- return SR_ERR;
+
+ if (devc->max_samples > 256 * 1024) {
+ arg[0] = ((readcount - 1) & 0xff);
+ arg[1] = ((readcount - 1) & 0xff00) >> 8;
+ arg[2] = ((readcount - 1) & 0xff0000) >> 16;
+ arg[3] = ((readcount - 1) & 0xff000000) >> 24;
+ if (send_longcommand(serial, CMD_CAPTURE_READCOUNT, arg) != SR_OK)
+ return SR_ERR;
+ arg[0] = ((delaycount - 1) & 0xff);
+ arg[1] = ((delaycount - 1) & 0xff00) >> 8;
+ arg[2] = ((delaycount - 1) & 0xff0000) >> 16;
+ arg[3] = ((delaycount - 1) & 0xff000000) >> 24;
+ if (send_longcommand(serial, CMD_CAPTURE_DELAYCOUNT, arg) != SR_OK)
+ return SR_ERR;
+ } else {
+ arg[0] = ((readcount - 1) & 0xff);
+ arg[1] = ((readcount - 1) & 0xff00) >> 8;
+ arg[2] = ((delaycount - 1) & 0xff);
+ arg[3] = ((delaycount - 1) & 0xff00) >> 8;
+ if (send_longcommand(serial, CMD_CAPTURE_SIZE, arg) != SR_OK)
+ return SR_ERR;
+ }
/* Flag register. */
sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s",
devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
memset(devc->sample, 0, 4);
- std_session_send_df_header(sdi, LOG_PREFIX);
+ std_session_send_df_header(sdi);
/* If the device stops sending for longer than it takes to send a byte,
* that means it's finished. But wait at least 100 ms to be safe.
return SR_OK;
}
-SR_PRIV struct sr_dev_driver ols_driver_info = {
+static struct sr_dev_driver ols_driver_info = {
.name = "ols",
- .longname = "Openbench Logic Sniffer",
+ .longname = "Openbench Logic Sniffer & SUMP compatibles",
.api_version = 1,
- .init = init,
- .cleanup = cleanup,
+ .init = std_init,
+ .cleanup = std_cleanup,
.scan = scan,
- .dev_list = dev_list,
- .dev_clear = NULL,
+ .dev_list = std_dev_list,
+ .dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
+SR_REGISTER_DEV_DRIVER(ols_driver_info);
projects / libsigrok.git / blobdiff