/*
* This file is part of the libsigrok project.
*
+ * Copyright (C) 2022 Gerhard Sittig <gerhard.sittig@gmx.net>
* Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de>
* Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
* Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
#define LA2016_EP2_PADDING 2048
/*
- * The complex logic input threshold voltage support with a custom level
- * is not operational yet. Ideally we could support the set of pre-made
- * voltages with their pretty text labels, and one of them referencing
- * a voltage which is user specified. But not all applications support
- * this setup equally well, or present it most appropriately to users.
- * So let's implement something simpler for the moment until the more
- * complex approach becomes accessible in all applications.
- *
- * Strictly speaking the logic input threshold voltage is a property of
- * the "Logic" channel group. Again not all applications support such
- * an approach, and like to see them as global device properties.
+ * Whether the logic input threshold voltage is a config item of the
+ * "Logic" channel group or a global config item of the device. Ideally
+ * it would be the former (being strictly related to the Logic channels)
+ * but mainline applications work better with the latter, and many other
+ * device drivers implement it that way, too.
*/
#define WITH_THRESHOLD_DEVCFG 1
-#define WITH_THRESHOLD_SIMPLE 1
-#if !WITH_THRESHOLD_DEVCFG && !WITH_THRESHOLD_SIMPLE
-# error "Custom threshold in Logic group is not implemented."
-#endif
#define LA2016_THR_VOLTAGE_MIN 0.40
#define LA2016_THR_VOLTAGE_MAX 4.00
+/* Properties related to the layout of capture data downloads. */
+#define TRANSFER_PACKET_LENGTH 16
#define LA2016_NUM_SAMPLES_MAX (UINT64_C(10 * 1000 * 1000 * 1000))
/* Maximum device capabilities. May differ between models. */
#define LA2016_NUM_PWMCH_MAX 2
+/*
+ * Whether to de-initialize the device hardware in the driver's close
+ * callback. It is desirable to e.g. configure PWM channels and leave
+ * the generator running after the application shuts down. Users can
+ * always disable channels on their way out if they want to.
+ */
+#define WITH_DEINIT_IN_CLOSE 0
+
#define LA2016_CONVBUFFER_SIZE (4 * 1024 * 1024)
struct kingst_model {
float duty;
} pwm_setting[LA2016_NUM_PWMCH_MAX];
size_t threshold_voltage_idx;
- float threshold_voltage;
- uint64_t cur_samplerate;
+ uint64_t samplerate;
struct sr_sw_limits sw_limits;
uint64_t capture_ratio;
/* Internal acquisition and download state. */
gboolean trigger_involved;
+ gboolean frame_begin_sent;
gboolean completion_seen;
gboolean download_finished;
+ uint32_t packets_per_chunk;
struct capture_info {
uint32_t n_rep_packets;
uint32_t n_rep_packets_before_trigger;
};
SR_PRIV int la2016_upload_firmware(const struct sr_dev_inst *sdi,
- struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id);
+ struct sr_context *sr_ctx, libusb_device *dev, gboolean skip_upload);
SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
gboolean show_message);
SR_PRIV int la2016_init_hardware(const struct sr_dev_inst *sdi);