* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "libsigrok.h"
-#include "libsigrok-internal.h"
-#include "dso.h"
#include <string.h>
#include <glib.h>
#include <libusb.h>
+#include <libsigrok/libsigrok.h>
+#include "libsigrok-internal.h"
+#include "dso.h"
+
+#define NUM_CHANNELS 2
extern struct sr_dev_driver hantek_dso_driver_info;
SR_PRIV int dso_open(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
- struct drv_context *drvc = hantek_dso_driver_info.priv;
+ struct drv_context *drvc = hantek_dso_driver_info.context;
struct sr_usb_dev_inst *usb;
struct libusb_device_descriptor des;
libusb_device **devlist;
- int err, skip, i;
+ int err, i;
+ char connection_id[64];
devc = sdi->priv;
usb = sdi->conn;
/* already in use */
return SR_ERR;
- skip = 0;
libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
for (i = 0; devlist[i]; i++) {
if ((err = libusb_get_device_descriptor(devlist[i], &des))) {
|| des.idProduct != devc->profile->fw_pid)
continue;
- if (sdi->status == SR_ST_INITIALIZING) {
- if (skip != sdi->index) {
- /* Skip devices of this type that aren't the one we want. */
- skip += 1;
- continue;
- }
- } else if (sdi->status == SR_ST_INACTIVE) {
+ if ((sdi->status == SR_ST_INITIALIZING) ||
+ (sdi->status == SR_ST_INACTIVE)) {
/*
- * This device is fully enumerated, so we need to find
- * this device by vendor, product, bus and address.
+ * Check device by its physical USB bus/port address.
*/
- if (libusb_get_bus_number(devlist[i]) != usb->bus
- || libusb_get_device_address(devlist[i]) != usb->address)
- /* this is not the one */
+ usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
+ if (strcmp(sdi->connection_id, connection_id))
+ /* This is not the one. */
continue;
}
sr_err("Wrong endpoint profile.");
else {
sdi->status = SR_ST_ACTIVE;
- sr_info("Opened device %d on %d.%d interface %d.",
- sdi->index, usb->bus,
- usb->address, USB_INTERFACE);
+ sr_info("Opened device on %d.%d (logical) / "
+ "%s (physical) interface %d.",
+ usb->bus, usb->address,
+ sdi->connection_id, USB_INTERFACE);
}
} else {
sr_err("Failed to open device: %s.",
usb = sdi->conn;
- if (usb->devhdl == NULL)
+ if (!usb->devhdl)
return;
- sr_info("Closing device %d on %d.%d interface %d.", sdi->index,
- usb->bus, usb->address, USB_INTERFACE);
+ sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.",
+ usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
libusb_release_interface(usb->devhdl, USB_INTERFACE);
libusb_close(usb->devhdl);
usb->devhdl = NULL;
* since that's how voltage offsets are submitted back to the DSO.
* Convert to host order now, so we can use them natively.
*/
- for (chan = 0; chan < 2; chan++) {
+ for (chan = 0; chan < NUM_CHANNELS; chan++) {
for (v = 0; v < 9; v++) {
devc->channel_levels[chan][v][0] =
g_ntohs(devc->channel_levels[chan][v][0]);
if (sr_log_loglevel_get() >= SR_LOG_DBG) {
gs = g_string_sized_new(128);
- for (chan = 0; chan < 2; chan++) {
+ for (chan = 0; chan < NUM_CHANNELS; chan++) {
g_string_printf(gs, "CH%d:", chan + 1);
for (v = 0; v < 9; v++) {
g_string_append_printf(gs, " %.4x-%.4x",
memset(cmdstring, 0, sizeof(cmdstring));
cmdstring[0] = CMD_SET_FILTERS;
cmdstring[1] = 0x0f;
- if (devc->filter_ch1) {
+ if (devc->filter[0]) {
sr_dbg("Turning on CH1 filter.");
cmdstring[2] |= 0x80;
}
- if (devc->filter_ch2) {
+ if (devc->filter[1]) {
sr_dbg("Turning on CH2 filter.");
cmdstring[2] |= 0x40;
}
- if (devc->filter_trigger) {
- /* TODO: supported on the DSO-2090? */
- sr_dbg("Turning on trigger filter.");
- cmdstring[2] |= 0x20;
- }
+ /*
+ * Not supported: filtering on the trigger
+ * cmdstring[2] |= 0x20;
+ */
if (send_begin(sdi) != SR_OK)
return SR_ERR;
cmdstring[2] = 0x30;
/* CH1 volts/div is encoded in bits 0-1 */
- sr_dbg("CH1 vdiv index: %d.", devc->voltage_ch1);
- switch (devc->voltage_ch1) {
+ sr_dbg("CH1 vdiv index: %d.", devc->voltage[0]);
+ switch (devc->voltage[0]) {
case VDIV_1V:
case VDIV_100MV:
case VDIV_10MV:
}
/* CH2 volts/div is encoded in bits 2-3 */
- sr_dbg("CH2 vdiv index: %d.", devc->voltage_ch2);
- switch (devc->voltage_ch2) {
+ sr_dbg("CH2 vdiv index: %d.", devc->voltage[1]);
+ switch (devc->voltage[1]) {
case VDIV_1V:
case VDIV_100MV:
case VDIV_10MV:
devc = sdi->priv;
usb = sdi->conn;
- if (devc->voltage_ch1 < VDIV_1V)
+ if (devc->voltage[0] < VDIV_1V)
relays[1] = ~relays[1];
- if (devc->voltage_ch1 < VDIV_100MV)
+ if (devc->voltage[0] < VDIV_100MV)
relays[2] = ~relays[2];
- sr_dbg("CH1 coupling: %d.", devc->coupling_ch1);
- if (devc->coupling_ch1 != COUPLING_AC)
+ sr_dbg("CH1 coupling: %d.", devc->coupling[0]);
+ if (devc->coupling[0] != COUPLING_AC)
relays[3] = ~relays[3];
- if (devc->voltage_ch2 < VDIV_1V)
+ if (devc->voltage[1] < VDIV_1V)
relays[4] = ~relays[4];
- if (devc->voltage_ch2 < VDIV_100MV)
+ if (devc->voltage[1] < VDIV_100MV)
relays[5] = ~relays[5];
- sr_dbg("CH2 coupling: %d.", devc->coupling_ch1);
- if (devc->coupling_ch2 != COUPLING_AC)
+ sr_dbg("CH2 coupling: %d.", devc->coupling[1]);
+ if (devc->coupling[1] != COUPLING_AC)
relays[6] = ~relays[6];
if (!strcmp(devc->triggersource, "EXT"))
memset(offsets, 0, sizeof(offsets));
/* Channel 1 */
- ch_levels = devc->channel_levels[0][devc->voltage_ch1];
+ ch_levels = devc->channel_levels[0][devc->voltage[0]];
offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch1 + ch_levels[0];
offsets[0] = (offset >> 8) | 0x20;
offsets[1] = offset & 0xff;
offsets[0], offsets[1]);
/* Channel 2 */
- ch_levels = devc->channel_levels[1][devc->voltage_ch2];
+ ch_levels = devc->channel_levels[1][devc->voltage[1]];
offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch2 + ch_levels[0];
offsets[2] = (offset >> 8) | 0x20;
offsets[3] = offset & 0xff;
bitvalue = 1;
for (i = 0; i < 24; i++) {
/* Each set bit inverts all bits with a lower value. */
- if(toff & bitvalue)
+ if (toff & bitvalue)
toff ^= bitvalue - 1;
bitvalue <<= 1;
}
projects / libsigrok.git / blobdiff