[SCPI_CMD_GET_DIG_DATA] = ":FORM UINT,8;:POD%d:DATA?",
[SCPI_CMD_GET_TIMEBASE] = ":TIM:SCAL?",
[SCPI_CMD_SET_TIMEBASE] = ":TIM:SCAL %s",
+ [SCPI_CMD_GET_HORIZONTAL_DIV] = ":TIM:DIV?",
[SCPI_CMD_GET_COUPLING] = ":CHAN%d:COUP?",
[SCPI_CMD_SET_COUPLING] = ":CHAN%d:COUP %s",
[SCPI_CMD_GET_SAMPLE_RATE] = ":ACQ:SRAT?",
[SCPI_CMD_GET_ANALOG_DATA] = ":FORM:BORD %s;" \
":FORM REAL,32;:CHAN%d:DATA?",
- [SCPI_CMD_GET_VERTICAL_DIV] = ":CHAN%d:SCAL?",
- [SCPI_CMD_SET_VERTICAL_DIV] = ":CHAN%d:SCAL %s",
+ [SCPI_CMD_GET_VERTICAL_SCALE] = ":CHAN%d:SCAL?",
+ [SCPI_CMD_SET_VERTICAL_SCALE] = ":CHAN%d:SCAL %s",
[SCPI_CMD_GET_DIG_POD_STATE] = ":POD%d:STAT?",
[SCPI_CMD_SET_DIG_POD_STATE] = ":POD%d:STAT %d",
+ [SCPI_CMD_GET_TRIGGER_SOURCE] = ":TRIG:A:SOUR?",
+ [SCPI_CMD_SET_TRIGGER_SOURCE] = ":TRIG:A:SOUR %s",
[SCPI_CMD_GET_TRIGGER_SLOPE] = ":TRIG:A:EDGE:SLOP?",
[SCPI_CMD_SET_TRIGGER_SLOPE] = ":TRIG:A:TYPE EDGE;:TRIG:A:EDGE:SLOP %s",
[SCPI_CMD_GET_TRIGGER_PATTERN] = ":TRIG:A:PATT:SOUR?",
":TRIG:A:PATT:COND \"TRUE\";" \
":TRIG:A:PATT:MODE OFF;" \
":TRIG:A:PATT:SOUR \"%s\"",
- [SCPI_CMD_GET_TRIGGER_SOURCE] = ":TRIG:A:SOUR?",
- [SCPI_CMD_SET_TRIGGER_SOURCE] = ":TRIG:A:SOUR %s",
+ [SCPI_CMD_GET_HIGH_RESOLUTION] = ":ACQ:HRES?",
+ [SCPI_CMD_SET_HIGH_RESOLUTION] = ":ACQ:HRES %s",
+ [SCPI_CMD_GET_PEAK_DETECTION] = ":ACQ:PEAK?",
+ [SCPI_CMD_SET_PEAK_DETECTION] = ":ACQ:PEAK %s",
[SCPI_CMD_GET_DIG_CHAN_STATE] = ":LOG%d:STAT?",
[SCPI_CMD_SET_DIG_CHAN_STATE] = ":LOG%d:STAT %d",
[SCPI_CMD_GET_VERTICAL_OFFSET] = ":CHAN%d:POS?",
[SCPI_CMD_GET_DIG_DATA] = ":FORM UINT,8;:LOG%d:DATA?",
[SCPI_CMD_GET_TIMEBASE] = ":TIM:SCAL?",
[SCPI_CMD_SET_TIMEBASE] = ":TIM:SCAL %s",
+ [SCPI_CMD_GET_HORIZONTAL_DIV] = ":TIM:DIV?",
[SCPI_CMD_GET_COUPLING] = ":CHAN%d:COUP?",
[SCPI_CMD_SET_COUPLING] = ":CHAN%d:COUP %s",
[SCPI_CMD_GET_SAMPLE_RATE] = ":ACQ:SRAT?",
[SCPI_CMD_GET_ANALOG_DATA] = ":FORM:BORD %s;" \
":FORM REAL,32;:CHAN%d:DATA?",
- [SCPI_CMD_GET_VERTICAL_DIV] = ":CHAN%d:SCAL?",
- [SCPI_CMD_SET_VERTICAL_DIV] = ":CHAN%d:SCAL %s",
+ [SCPI_CMD_GET_VERTICAL_SCALE] = ":CHAN%d:SCAL?",
+ [SCPI_CMD_SET_VERTICAL_SCALE] = ":CHAN%d:SCAL %s",
[SCPI_CMD_GET_DIG_POD_STATE] = ":LOG%d:STAT?",
[SCPI_CMD_SET_DIG_POD_STATE] = ":LOG%d:STAT %d",
+ [SCPI_CMD_GET_TRIGGER_SOURCE] = ":TRIG:A:SOUR?",
+ [SCPI_CMD_SET_TRIGGER_SOURCE] = ":TRIG:A:SOUR %s",
[SCPI_CMD_GET_TRIGGER_SLOPE] = ":TRIG:A:EDGE:SLOP?",
[SCPI_CMD_SET_TRIGGER_SLOPE] = ":TRIG:A:TYPE EDGE;:TRIG:A:EDGE:SLOP %s",
[SCPI_CMD_GET_TRIGGER_PATTERN] = ":TRIG:A:PATT:SOUR?",
":TRIG:A:PATT:COND \"TRUE\";" \
":TRIG:A:PATT:MODE OFF;" \
":TRIG:A:PATT:SOUR \"%s\"",
- [SCPI_CMD_GET_TRIGGER_SOURCE] = ":TRIG:A:SOUR?",
- [SCPI_CMD_SET_TRIGGER_SOURCE] = ":TRIG:A:SOUR %s",
+ [SCPI_CMD_GET_HIGH_RESOLUTION] = ":ACQ:HRES?",
+ [SCPI_CMD_SET_HIGH_RESOLUTION] = ":ACQ:HRES %s",
+ [SCPI_CMD_GET_PEAK_DETECTION] = ":ACQ:PEAK?",
+ [SCPI_CMD_SET_PEAK_DETECTION] = ":ACQ:PEAK %s",
[SCPI_CMD_GET_DIG_CHAN_STATE] = ":LOG%d:STAT?",
[SCPI_CMD_SET_DIG_CHAN_STATE] = ":LOG%d:STAT %d",
[SCPI_CMD_GET_VERTICAL_OFFSET] = ":CHAN%d:POS?", /* Might not be supported on RTB200x... */
static const uint32_t devopts[] = {
SR_CONF_OSCILLOSCOPE,
SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
- SR_CONF_LIMIT_FRAMES | SR_CONF_SET,
+ SR_CONF_LIMIT_FRAMES | SR_CONF_GET | SR_CONF_SET,
SR_CONF_SAMPLERATE | SR_CONF_GET,
SR_CONF_TIMEBASE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_NUM_HDIV | SR_CONF_GET,
SR_CONF_TRIGGER_SOURCE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_TRIGGER_SLOPE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_TRIGGER_PATTERN | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_HIGH_RESOLUTION | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_PEAK_DETECTION | SR_CONF_GET | SR_CONF_SET,
};
static const uint32_t devopts_cg_analog[] = {
"MAN", // overwritten by logic_threshold_custom
};
+/* This might need updates whenever logic_threshold* above change. */
+#define MAX_NUM_LOGIC_THRESHOLD_ENTRIES ARRAY_SIZE(logic_threshold)
+
/* RTC1002, HMO Compact2 and HMO1002/HMO1202 */
static const char *an2_dig8_trigger_sources[] = {
"CH1", "CH2",
"D8", "D9", "D10", "D11", "D12", "D13", "D14", "D15",
};
-static const struct scope_config scope_models[] = {
+static struct scope_config scope_models[] = {
{
/* HMO Compact2: HMO722/1022/1522/2022 support only 8 digital channels. */
.name = {"HMO722", "HMO1022", "HMO1522", "HMO2022", NULL},
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &hameg_scpi_dialect,
.name = {"RTC1002", "HMO1002", "HMO1202", NULL},
.analog_channels = 2,
.digital_channels = 8,
- .digital_pods = 1,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &hameg_scpi_dialect,
.name = {"HMO3032", "HMO3042", "HMO3052", "HMO3522", NULL},
.analog_channels = 2,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &hameg_scpi_dialect,
.name = {"HMO724", "HMO1024", "HMO1524", "HMO2024", NULL},
.analog_channels = 4,
.digital_channels = 8,
- .digital_pods = 1,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &hameg_scpi_dialect,
.name = {"HMO2524", "HMO3034", "HMO3044", "HMO3054", "HMO3524", NULL},
.analog_channels = 4,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &hameg_scpi_dialect,
.name = {"RTB2002", NULL},
.analog_channels = 2,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &rohde_schwarz_log_not_pod_scpi_dialect,
.name = {"RTB2004", NULL},
.analog_channels = 4,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &rohde_schwarz_log_not_pod_scpi_dialect,
.name = {"RTM3002", NULL},
.analog_channels = 2,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &rohde_schwarz_log_not_pod_scpi_dialect,
.name = {"RTM3004", NULL},
.analog_channels = 4,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &rohde_schwarz_log_not_pod_scpi_dialect,
.name = {"RTA4004", NULL},
.analog_channels = 4,
.digital_channels = 16,
- .digital_pods = 2,
.analog_names = &scope_analog_channel_names,
.digital_names = &scope_digital_channel_names,
.vdivs = &vdivs,
.num_vdivs = ARRAY_SIZE(vdivs),
- .num_xdivs = 12,
.num_ydivs = 8,
.scpi_dialect = &rohde_schwarz_log_not_pod_scpi_dialect,
ch->enabled = state->analog_channels[i].state;
g_snprintf(command, sizeof(command),
- (*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_DIV],
+ (*config->scpi_dialect)[SCPI_CMD_GET_VERTICAL_SCALE],
i + 1);
if (sr_scpi_get_string(scpi, command, &tmp_str) != SR_OK)
{
unsigned int i, idx;
int result = SR_ERR;
- static char *logic_threshold_short[] = {};
+ char *logic_threshold_short[MAX_NUM_LOGIC_THRESHOLD_ENTRIES];
char command[MAX_COMMAND_SIZE];
struct sr_channel *ch;
struct sr_scpi_dev_inst *scpi = sdi->conn;
if (config->logic_threshold_for_pod)
idx = i + 1;
else
- idx = i * 8;
+ idx = i * DIGITAL_CHANNELS_PER_POD;
g_snprintf(command, sizeof(command),
(*config->scpi_dialect)[SCPI_CMD_GET_DIG_POD_THRESHOLD],
if (digital_channel_state_get(sdi, config, state) != SR_OK)
return SR_ERR;
- if (sr_scpi_get_float(sdi->conn,
- (*config->scpi_dialect)[SCPI_CMD_GET_TIMEBASE],
- &tmp_float) != SR_OK)
- return SR_ERR;
-
if (sr_scpi_get_string(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_TIMEBASE],
&tmp_str) != SR_OK)
state->timebase = i;
+ /* Determine the number of horizontal (x) divisions. */
+ if (sr_scpi_get_int(sdi->conn,
+ (*config->scpi_dialect)[SCPI_CMD_GET_HORIZONTAL_DIV],
+ (int *)&config->num_xdivs) != SR_OK)
+ return SR_ERR;
+
if (sr_scpi_get_float(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_HORIZ_TRIGGERPOS],
&tmp_float) != SR_OK)
MAX_ANALOG_CHANNEL_COUNT + MAX_DIGITAL_CHANNEL_COUNT);
g_free(tmp_str);
+ if (sr_scpi_get_string(sdi->conn,
+ (*config->scpi_dialect)[SCPI_CMD_GET_HIGH_RESOLUTION],
+ &tmp_str) != SR_OK)
+ return SR_ERR;
+ if (!strcmp("OFF", tmp_str))
+ state->high_resolution = FALSE;
+ else
+ state->high_resolution = TRUE;
+ g_free(tmp_str);
+
+ if (sr_scpi_get_string(sdi->conn,
+ (*config->scpi_dialect)[SCPI_CMD_GET_PEAK_DETECTION],
+ &tmp_str) != SR_OK)
+ return SR_ERR;
+ if (!strcmp("OFF", tmp_str))
+ state->peak_detection = FALSE;
+ else
+ state->peak_detection = TRUE;
+ g_free(tmp_str);
+
if (hmo_update_sample_rate(sdi) != SR_OK)
return SR_ERR;
return SR_ERR_NA;
}
+ /* Configure the number of PODs given the number of digital channels. */
+ scope_models[model_index].digital_pods = scope_models[model_index].digital_channels / DIGITAL_CHANNELS_PER_POD;
+
devc->analog_groups = g_malloc0(sizeof(struct sr_channel_group*) *
scope_models[model_index].analog_channels);
devc->digital_groups = g_malloc0(sizeof(struct sr_channel_group*) *
ch = sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
(*scope_models[model_index].digital_names)[i]);
- group = i / 8;
+ group = i / DIGITAL_CHANNELS_PER_POD;
devc->digital_groups[group]->channels = g_slist_append(
devc->digital_groups[group]->channels, ch);
}
(void)fd;
(void)revents;
- data = NULL;
-
if (!(sdi = cb_data))
return TRUE;
* Send "frame begin" packet upon reception of data for the
* first enabled channel.
*/
- if (devc->current_channel == devc->enabled_channels) {
- packet.type = SR_DF_FRAME_BEGIN;
- sr_session_send(sdi, &packet);
- }
+ if (devc->current_channel == devc->enabled_channels)
+ std_session_send_df_frame_begin(sdi);
/*
* Pass on the received data of the channel(s).
*/
switch (ch->type) {
case SR_CHANNEL_ANALOG:
+ data = NULL;
if (sr_scpi_get_block(sdi->conn, NULL, &data) != SR_OK) {
if (data)
g_byte_array_free(data, TRUE);
/* Truncate acquisition if a smaller number of samples has been requested. */
if (devc->samples_limit > 0 && analog.num_samples > devc->samples_limit)
analog.num_samples = devc->samples_limit;
- analog.encoding = &encoding;
- analog.meaning = &meaning;
- analog.spec = &spec;
-
- encoding.unitsize = sizeof(float);
- encoding.is_signed = TRUE;
- encoding.is_float = TRUE;
-#ifdef WORDS_BIGENDIAN
- encoding.is_bigendian = TRUE;
-#else
- encoding.is_bigendian = FALSE;
-#endif
/* TODO: Use proper 'digits' value for this device (and its modes). */
- encoding.digits = 2;
- encoding.is_digits_decimal = FALSE;
- encoding.scale.p = 1;
- encoding.scale.q = 1;
- encoding.offset.p = 0;
- encoding.offset.q = 1;
+ sr_analog_init(&analog, &encoding, &meaning, &spec, 2);
+ encoding.is_signed = TRUE;
if (state->analog_channels[ch->index].probe_unit == 'V') {
meaning.mq = SR_MQ_VOLTAGE;
meaning.unit = SR_UNIT_VOLT;
meaning.mq = SR_MQ_CURRENT;
meaning.unit = SR_UNIT_AMPERE;
}
- meaning.mqflags = 0;
meaning.channels = g_slist_append(NULL, ch);
- /* TODO: Use proper 'digits' value for this device (and its modes). */
- spec.spec_digits = 2;
packet.payload = &analog;
sr_session_send(sdi, &packet);
devc->num_samples = data->len / sizeof(float);
data = NULL;
break;
case SR_CHANNEL_LOGIC:
+ data = NULL;
if (sr_scpi_get_block(sdi->conn, NULL, &data) != SR_OK) {
if (data)
g_byte_array_free(data, TRUE);
packet.payload = &logic;
sr_session_send(sdi, &packet);
} else {
- group = ch->index / 8;
+ group = ch->index / DIGITAL_CHANNELS_PER_POD;
hmo_queue_logic_data(devc, group, data);
}
*/
hmo_cleanup_logic_data(devc);
- packet.type = SR_DF_FRAME_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_frame_end(sdi);
/*
* End of frame was reached. Stop acquisition after the specified
projects / libsigrok.git / blobdiff